GE ASSS Specification Sheet

Steel SQUARe StRAIGHt AReA lIGHtING POleS

10 tO 39 feet (3 tO 12 meteRS)

SUGGESTED LUMINAIRE APPLICATIONS

SPECIFICATION FEATURES

•  Square straight steel shaft

DSMT, DSA

DMA

SPMM

DCD, DCF

POLE SELECTION TABLE

Nominal Bolt Approximate
Ordering Mounting Size Wall Circle Bolt Ship Base Plate
Number Height (ft) (in.) Gauge 80 90 100 (in.) Size (in.) Weight (lbs) Size (in.)

ASSS10XX411DB 10 4 11 30.6 23.8 18.9 8.25 3/4X20 111 8.25X8.25X0.75
12XX411DB 12 4 11 24.4 18.8 14.8 8.25 3/4X20 123 8.25X8.25X0.75
14XX411DB 14 4 11 19.9 15.1 11.7 8.25 3/4X20 135 8.25X8.25X0.75
15XX411DB 15 4 11 15.9 11.8 8.9 8.25 3/4X20 130 8.25X8.25X0.75
16XX411DB 16 4 11 15.9 11.8 8.9 8.25 3/4X20 146 8.25X8.25X0.75
18XX411DB 18 4 11 12.6 9.2 6.7 8.25 3/4X20 158 8.25X8.25X0.75

ASSS20XX411DB 20 4 11 9.6 6.7 4.5 8.25 3/4X20 162 8.25X8.25X0.75
20XX47DB 20 4 7 15.9 12.5 10.1 8.25 3/4X20 244 8.25X8.25X0.75
20XX57DB 20 5 7 28.1 21.4 16.2 11.0 3/4X20 2 6 5 11.0X11.0X1.00
20XX511DB 20 5 11 17.7 12.7 9.4 11.0 3/4X20 1 85 11.0X11.0X1.00

ASSS25XX411DB 25 4 11 4.8 2.6 1.0 8.25 3/4X20 191 8.25X8.25X0.75
25XX47DB 25 4 7 10.8 7.7 5.4 8.25 3/4X20 273 8.25X8.25X0.88
25XX57DB 25 5 7 18.5 13.3 9.5 11.0 3/4X20 395 11.0X11.0X1.00
25XX511DB 25 5 11 9.8 6.3 3.7 11.0 3/4X20 241 11.0X11.0X1.00

ASSS30XX511DB 30 5 11 4.7 2.0 -.- 11.0 3/4X20 263 11.0X11.0X1.00
30XX57DB 30 5 7 10.7 6.7 3.9 11.0 3/4X20 480 11.0X11.0X1.00
30XX67DB 30 6 7 19.0 13.2 9.0 12.0 1X40 558 12.5X12.5X1.00

ASSS35XX57DB 35 5 7 5.9 2.5 -.- 11.0 3/4X20 490 11.0X11.0X1.00
35XX67DB 35 6 7 12.4 7.6 4.2 12.0 1X40 633 12.5X12.5X1.00

ASSS40XX67DB 39 6 7 7.2 3.0 -.- 12.0 1X40 693 12.5X12.5X1.00

EPA (sq ft) MPHI

•  Dark bronze powder coated finish standard

•  Shaft lengths from 10 to 39 feet

•  Pole drilled for decorative mounting arm(s) or for    
  top  tenon mounting

•  Single or multiple luminaire mounting

•  Base cover includes two-piece ABS Plastic Full Cover

•  Anchor bolts, hardware, handhole cover, circle  
  template, shaft cap or top tenon – all included

Figure 1

ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers)

A

PRODUCT IDENT
(LUMINAIRE
USAGE)

X

A = Area S = Straight S = Steel 10 = 10

S

POLE
CROSS
SECTION

X

S = Square

REFERENCES

See Page P-21 for Anchor Base Data
See Page P-2 for Pole Selection Guidelines

S

SHAFT
SHAPE

X

S

POLE
MATERIAL

X

10

NOMINAL
MOUNTING
HEIGHT (FT)

XX

12 = 12
14 = 14
16 = 16
18 = 18
20 = 20
24 = 24
30 = 30
35 = 35
39 = 39

TT

MOUNTING

XX

DB = Drill holes for mounting two luminaires at 90°*
DO = Drill holes for two luminaires at 180°*
DQ = Drill holes for four luminaires*
SD = Drill holes for single luminaire*
TB = Drill holes for three luminaires at 90°*
TD = Drill holes for three luminaires at 120°*
TT = 2-3/8-in. OD top tenon (Fig. 1)
NOTE: *Drill for SPMM luminaire as indicated
NOTE: Substitute required mounting designation

for XX in ordering number listed in Selection
Table.

NOTE: Drilling templates are the same for Decashield®,

Dimension®, and DecasphereTM luminaires.

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

4

WIDTH
(IN. X IN.)

X

4 = 4X4
5 = 5X5
6 = 6X6

11

SHAFT DIMENSIONS

THICKNESS
(GAUGE)

XX

7 = 7
11 = 11

DB

FINISH

XX

DB = Dark

bronze
powder
coated
(Standard)

BL = Black

2008/P-11