GE ASHS Specification Sheet
STEEL SQuARE HINgED AREA LIgHTINg POLES
20 TO 39 fEET (6 TO 12 mETERS)
SUGGESTED LUMINAIRE APPLICATIONS
PF4S,
HLUF
PF4T
PF1S,
PF1T
VLUF
SPECIFICATION FEATURES
• Square hinged steel shaft
• Prime painted inside and out
• Shaft lengths from 20 to 39 feet
• Two top tenon sizes
• Stainless steel pin for hinge
• Flexible wiring guide at hinge area
• Portable lowering mechanisms available
P54S
PSFA
PF1K
Mounting
2T and 4T
ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers)
A
PRODUCT IDENT
(LUMINAIRE
USAGE)
X
A = Area S = Steel 20 = 20
SH
POLE
CROSS
SECTION
XX
SH = Square Hinged
S
POLE
MATERIAL
X
20
NOMINAL
MOUNTING
HEIGHT (FT)
XX
25 = 25
30 = 30
39 = 39
2T
MOUNTING
XX
2T = 2-3/8-in. OD top tenon
(See illustration above)
4T = 4-in. OD top tenon
(See illustration above)
NOTE: Either of these mountings can
be used with any of the poles listed;
substitute the correct mounting designation for XX in the ordering number
listed in the Selection Table
4.0
BOTTOM SHAFT
OD (IN.)
XXX
4.0 = 4.00
6.4 = 6.41
7.1 = 7.13
7.2 = 7.18
11
SHAFT DIMENSIONS
GUAGE
XX
7 = 7
11 = 11
PP
FINISH
XX
PP = Prime Painted
(Standard)
BL = Black
DB = Dark Bronze
GV = Galvanized
P-18/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
STEEL SQuARE EXTERNAL HINgED AREA LIgHTINg POLES
20 TO 39 fEET (6 TO 12 mETERS)
POLE SELECTION TABLE
Shipped with pole: anchor bolts, hardware, and anchor bolt circle template.
Nominal Pole Bolt Circle Base Plate Anchor Bolt
Ordering Mounting Shaft Weight Diameter Size Size
Number Height (ft) Size (in.) (lbs) 70 80 90 100 (in.) (sq in. X thickness [in.]) (in.)
ASHS20XX4.07PP 20 4.00 217 16.2 11.6 8.5 6.2 8.5 9.75 X 0.750 3/4 X 17 X 3
25XX4.07PP 25 4.00 160 10.6 7.1 4.8 3.1 8.5 9.75 X 0.750 3/4 X 17 X 3
25XX6.411PP 25 6.41 254 25.2 18.0 13.0 9.3 12.5 11.88 X 0.875 1 X 36 X 4
30XX4.07PP 30 4.00 120 6.8 4.0 2.1 0.8 8.5 9.75 X 0.750 3/4 X 17 X 3
30XX6.411PP 30 6.41 230 18.4 12.5 8.3 5.1 12.5 11.88 X 0.875 1 X 36 X 4
35XX7.211PP 35 7.18 160 12.7 7.1 3.2 – 13.5 12.63 X 0.875 1 X 36 X 4
35XX7.17PP 35 7.13 155 28.5 22.0 16.9 12.1 13.5 12.63 X 1.250 1 X 36 X 4
39XX7.17PP 39 7.13 110 28.3 19.5 13.5 9.2 13.5 12.63 X 1.250 1 X 36 X 4
NOTE: All 4-inch shaft size poles are non-tapered; all poles above 4-inch shaft size are tapered.
Max Recommended Total Load
Eective Projected Area (sq ft) MPHI
HINGE SECTION DETAIL
REFERENCES
See Page P-2 for Pole Selection Guidelines
WINCH DETAIL
Removable design to
be used only during
maintenance. Not to
be installed permanently.
WINCH/CHAIN KIT*
Ordering Number Used With Pole
M180A ASHS20XX4.07
M180A ASHS25XX4.07
M136 ASHS25XX6.411
M180A ASHS30XX4.07
M136 ASHS30XX6.411
M135 ASHS35XX7.17
M135 ASHS35XX7.211
M135 ASHS39XX7.17
NOTE: *One required per pole.
CAUTION: To prevent damage to the pole the chain
and/or cable must be kept taut when raising and
lowering the pole.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
2008/P-19
Loading...