GE AJHS08DC Specification

AJHS08DC—”J Series” Heat Pump

GE Appliances

Created 1/98

Note: When installing units in through-the-wall applications.
Do not restrict air flow areas.

26

15-5/8

16-7/8

Wall Case Dimensions (in inches)

Perpendicular

230/208V
20 Amp

R

R

Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.

Listed by
Underwriters
Laboratories

For answers to your Monogram,®GE Profile
Performance Series,™GE Profile,™GE,
Hotpoint and RCA appliance questions, call
GE Answer Center®service, 800.626.2000.

GE Appliances

Created 1/98

AJHS08DC—”J Series” Heat Pump

Dimensions (in inches)

Installation Information: A finished opening of

26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame
walls should have wood studding surrounding case to
provide firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in lead
expansion shields.

Brick Block and Brick
Frame Construction

Fill open cells
with mortar
or insulation

5" Min.
from floor

15-3/4

26-1/8

Lintel

Make frame if desired or caulk
between case and siding

15-3/4

26-1/8

5" Min.
from floor

Frame Construction

Lintel

OUTSIDE INSIDE

16-7/8

Caulking

Drip Rail

Trim Molding
(if desired)

Plaster Line

Flexible Mounting Position

R

R

Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.

Listed by
Underwriters
Laboratories

For answers to your Monogram,®GE Profile
Performance Series,™GE Profile,™GE,
Hotpoint and RCA appliance questions, call
GE Answer Center®service, 800.626.2000.