GE AJCS09DC Specification

GE Appliances

AJCS09DC—”J Series” Cool Unit

Wall Case Dimensions (in inches)

15-5/8

26

16-7/8

Note: When installing units in through-the-wall applications. Do not restrict air flow areas.

Created 1/98

Tandem

230/208V 15 Amp

For answers to your Monogram,®GE Profile

Performance Series,™ GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000.

	Total capacity and E.E.R.
	ratings are calculated		Listed by
	based on the Association		Underwriters
	of Home Appliance	R	Laboratories
R	Manufacturers’ standards.

GE Appliances

AJCS09DC—”J Series” Cool Unit

Dimensions (in inches)

Make frame if desired or caulk between case and siding

26-1/815-3/4

5" Min. from floor

Frame Construction

Lintel

15-3/4

26-1/8

5" Min. from floor

Fill open cells

with mortar

Brick Block and Brick or insulation Frame Construction

Created 1/98

	Plaster Line
Lintel	Trim Molding
	(if desired)
OUTSIDE	INSIDE
	16-7/8
Caulking
Drip Rail

Installation Information: A finished opening of 26-1/8" x 15-3/4" clear of intrusions is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.

Flexible Mounting Position

For answers to your Monogram,®GE Profile

Performance Series,™ GE Profile,™ GE,

Hotpoint and RCA appliance questions, call

GE Answer Center® service, 800.626.2000.

	Total capacity and E.E.R.
	ratings are calculated		Listed by
	based on the Association		Underwriters
	of Home Appliance	R	Laboratories
R	Manufacturers’ standards.