GE AJCQ12DCB User Manual
GE Appliances
Premium, Deluxe and Value Model
Wall Case Dimensions (in inches)
26
15-5/8
16-7/8
R
R
AJCQ12DCB – GE® ENERGY STAR® 230/208 Volt Built-In Room Air Conditioner
Wall Case Dimensions (in inches)
Tandem
230/208V
15 Amp
When installing slide-out chassis units in through-the-wall
Note:
applications, keep louvers free. Do not restrict air flow areas.
Specification Revised 6/ 04
3902 25
As an ENERGY STAR®
partner, GE has determined
that this product meets the
ENERGY STAR
for energy efficiency.
guidelines
For answers to your Monogram,® GE Profile™ or
Listed by
Underwriters
Laboratories
GE® appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
®
service, 800.626.2000.
15-3/4
26-1/8
Frame Construction
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
15-3/4
26-1/8
Lintel
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
15-3/4
26-1/8
Lintel
Lintel
OUTSIDE INSIDE
16-7/8
Drip Rail
Trim Molding
(if desired)
Plaster Line
Flexible Mounting Position
R
R
GE Appliances
AJCQ12DCB – GE® ENERGY STAR® 230/208 Volt Built-In Room Air Conditioner
Dimensions (in inches)
Installation Information: A finished opening of 26-1/8" x 15-3/4"
clear of intrusions is required. Keep clearance of 4" from side walls.
Brick veneer or frame walls should have wood studding surrounding case
to provide firm anchoring with screws. Case can be fastened directly
to brick or block walls with screws sunk in lead expansion shields.
Note: Units should be caulked on all four sides of case to the building
exterior to assure building integrity.
Two Wall Cases for Tenant Option Installation
When the air conditioner is offered as a tenant option, these wall cases
provide protection against outside elements.
RAB47 – includes wall case, exterior grille and steel closure panels.
RAB48 – includes wall case, exterior grille, steel closure panel and
two layers of insulation.
Standard Wall Case RAB46
Solid-sided wall case fabricated of galvanized steel with baked enamel
finish. Welded areas are coated with a sealing compound
rust and corrosion. Polymer gasket surrounds opening
weather seal. Aluminum grille (RAG13) is included. Panels on interior
and
between case and grille provide weather protection prior to
installation of chassis, provide firm anchoring with screws. Case can
be fastened directly to brick or block walls with screws sunk in lead
expansion shields.
to help resist
to assure tight
Specification Revised 6/ 04
3902 25
As an ENERGY STAR®
partner, GE has determined
that this product meets the
ENERGY STAR
for energy efficiency.
Listed by
Underwriters
Laboratories
guidelines
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
®
service, 800.626.2000.
Loading...