Page 1
AJCH10ACA—GE 115 Volt Built-In ”J Series” Room Air Conditioner with Mechanical Controls
Specification Created 5/01
GE Appliances
26
15-5/8
16-7/8
Wall Case Dimensions (in inches)
Parallel
115V
15 Amp
R
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,® GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
Note: When installing slide-out chassis units in through- the-wall
applications. Do not restrict air flow areas.
Page 2
Specification Created 5/01
GE Appliances
AJCH10ACA—GE 115 Volt Built-In ”J Series” Room Air Conditioner with Mechanical Controls
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
15-3/4
26-1/8
Lintel
Dimensions (in inches)
Installation Information: A finished opening of
26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame walls
should have wood studding surrounding case to
provide firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in lead
expansion shields.
Note: Units should be caulked on all four sides of case to the
building exterior to assure building integrity.
Two Wall Cases for Tenant Option Installation
When the air conditioner is offered as a tenant option, these
wall cases provide protection against outside elements.
RAB47–includes wall case, exterior grille and steel
closure panels.
RAB48–includes wall case, exterior grille, steel
closure panel and two layers of insulation.
Standard Wall Case RAB46
Solid-sided wall case fabricated of galvanized steel with
baked enamel finish. Welded areas are coated with a
sealing compound to help resist rust and corrosion. Polymer
gasket surrounds opening to assure tight weather seal.
Aluminum grille (RAG13) is included. Panels on interior and
between case and grille provide weather protection prior to
installation of chassis.
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Lintel
OUTSIDE INSIDE
16-7/8
Caulking
Drip Rail
Trim Molding
(if desired)
Plaster Line
Flexible Mounting Position
R
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,® GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
Page 3
Specification Created 5/01
GE Appliances
AJCH10ACA—GE 115 Volt Built-In ”J Series” Room Air Conditioner with Mechanical Controls
Features and Benefits
• 9,000 BTUH, 115 Volts
• 9.2 E.E.R.
• Mechanical Controls with Variable Setting Thermostat
• 2 Cooling/2 Fan Only Speeds
• Fan Cycle Switch for Reduced Energy Consumption
• Slide-Out Chassis
• 250/210 Airflow (CFM) Roomside Hi/Low
• Exhaust for Air Exchange
• 2.7 Dehumidification (pints/hr)
• Slide-Out Filter for Easy Cleaning
• 1075 Watts / 9.7 Amps
• Wall Case–Optional Accessory (RAB46/47/48)
• Plug Type–Parallel
• Rotary Compressor
• Model AJCH10ACA
Loading...