For customers in the U.S.A.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
For customers in Europe
"CE" mark indicates that this product
complies with the European requirements
for safety, health, environment and customer
protection. "CE" mark cameras are intended for
sales in Europe.
This symbol [cr ossed -out wheele d bi n
WEEE Annex IV] indicates separate collection
of waste electrical and electronic equipment in the
EU countries. Please do not throw the equipment
into the domestic refuse. Please use the return and
collection systems available in your country for the
disposal of this product.
Declaration of Conformity
Model Name : G2/A735/A835/A1030/A1230
E840s/E1035/E1235
Trade Name : GE
Responsible Party : General Imaging Co.
Address : 2158 W.190th Street,
Torrance, CA 90504, USA
Telephone Number : 1-800-730-6597
Conforms to the following Standards:
EMC: EN 55022:1998/A1:2000/A2:2003 Class B
EN 55024:1998/A1:2001/A2:2003
EN 61000-3-2:2000/A1:2001
EN 61000-3-3:1995/A1:2001
following the provision of the EMC Directive
(89/336/EEC,2004/108/EEC)
SAFETY PRECAUTIONS
Camera notes:
Do not store or use the camera in the following
types of locations:
• In the rain, very humid and dusty places.
• In a place where the camera can be exposed
directly to the sunlight or subject to high
temperature, e.g. Inside a closed car in summer.
• In a place where the camera is subject to a high
magnetic eld, e.g. near motors, transformers
or magnets.
Do not place the camera on a wet surface or places
where dripping water or sand may come in contact
with the camera, which may cause irrepairable faults.
If the camera will not be used for a long period of
time, we suggest you remove the battery and the
memory card.
If you carry the camera suddenly from a cold location to a warm place, moisture may condense
inside the camera. We suggest you wait for a while
before turning on the camera.
No compensation for loss of recordings. Loss of recordings cannot be compensated for if a malfunc-
tion of your camera or recording media, etc, makes
the playback of recordings not possible.
iv1iv1
Battery notes:
Incorrect use of the batteries may cause them to
leak, become hot, ignite or burst. Always observe
the precautions given below.
• Do not expose the batteries to water, and take
particular care to keep the terminals dry.
•
Do not heat the batteries or throw them into a re.
• Do not attempt to deform, disassemble or modify
the batteries.
• Use GE charger in the package to charge the
lithium battery only (for G and E series).
Keep the batteries out of reach of babies and small
children.
In cold locations, battery performance deteriorates
and the time for which they can be used shortens
markedly.
Memory card notes:
When using a new memory card, or a memory card
has been initialized by a PC, be sure to format the
card with your digital camera before using it.
To edit image data, copy the image data to the PC's
hard disk and then format memory card if upgrade
the rmware.
Do not change or delete the directory names, or le
names in the memory card from your PC, as this may
make it impossible to use the card in your camera.
BEFORE YOU START
Preface
Thank you for purchasing GE digital cameras.
Please read this manual carefully and keep it in a
No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form, by any means, without
the prior written permission of General Imaging
Company.
Trademarks
All trademarks mentioned in this manual are used
for identication purposes only and may be prop-
erties of their respective owners.
Safety information
Please read the following important information
carefully before using the product.
• Do not take apart or attempt to service the
camera yourself.
• Do not drop or knock the camera. Improper
handling may damage the product.
• Turn o the camera before inserting or removing
the battery and memory card.
• Use only the type of battery and charger that
came with your camera. Using other types of
batteries or chargers may damage the camera
and invalidate the warranty.
• When using Li-ion batteries in this product,
ensure that they are inserted correctly. Inserting
the batteries upside down can cause damage to
the camera and possibly start a re.
• Do not touch the camera lens.
• Do not expose the camera to moisture, or extreme temperatures. Extreme environments may
shorten the life of your camera or damage the
batteries.
• Do not use or store the camera in dusty, dirty, or
sandy areas, as its components may be damaged.
• Do not expose the lens to direct sunlight for
extended periods.
• Download all pictures and remove the batteries
from the camera if you are going to store the
camera for long periods.
• Do not use abrasive cleansers, alcohol-based,
or solvent-based cleaners to clean the camera.
Wipe the camera with a slightly damp soft cloth.
About this manual
This manual provides you with instructions on
how to use your GE digital camera. Every eort
has been made to ensure that the contents of
this manual are accurate, but General Imaging
Company reserves the right to make changes
without notice.
Symbols used in this manual
Throughout this manual, the following symbols
are used to help you locate information quickly
and easily.
Indicates the useful information to know.
Indicates the precautions to be taken
while operating the camera.
2323
CONTENTS
WARNING
SAFETY PRECAUTIONS
BEFORE YOU START ................................ 1
11 Exposure compensation/ Up button 23 Wrist strap mount
12 Macro mode/ Right button
Camera views : A735/A835
12
3
4
5
8
7
6
9
10
11
12
13
14
15
16
Front View
Back View
Right View
10111011
Top View
17
18
19
20
21
22
23
Bottom View
1Flash13Self-timer/ Down button
2Lens14Func/ok button
3Mic15Flash mode/ Left button
4AF assist beam/Timer indicator 16USB/ AV port
5Status LED17Power button
Left View
6LCD screen18Shutter button
7Face detection AF button19Mode dial
8T&W button20Speaker
9Menu button21Tripod mount point
10 Erase button22Memory card
/ Battery compartment
11 Exposure compensation/ Up button 23Wrist strap mount
12 Macro mode/ Right button
Camera views : A1030/A1230
12
3
4
megapixel
12.1
6
7
5
8
9
11
12
13
14
10
15
Front View
Back View
Right View
12131213
Top View
17
18
19
16
20
21
22
23
Bottom View
1AF assist beam/Timer indicator13 Self-timer/ Down button
2Flash14 Flash mode/ Left button
3Lens 15 USB/ AV port
4Mic16 Power button
5LCD screen17 Status LED
Left View
6Face detection AF button18 Shutter button
7Zoom scroll wheel19 Mode dial
8Menu button20 Tripod mount point
9Erase button21 Speaker
10 Func/ok button22
Memory card / Battery compartment
11 Exposure compensation/Up button 23 Wrist strap mount
12 Macro mode/ Right button
Camera views : E840s
1 2
3
4
5
7
6
8
9
10
11
12
13
14
15
16
Front View
14151415
Right View
Back View
Top View
19
17
18
2021
22
23
Left View
Bottom View
1Mic13Self-timer/ Down button
2Flash14Flash mode/ Left button
3AF assist beam/Timer indicator15Func/ok button
4 Lens16Speaker
5LCD screen17Power button
6Face detection AF button18Shutter button
7Status LED19Zoom scroll wheel
8Mode dial20Tripod mount point
9Menu button21USB/ AV port
10 Erase button22Memory card/
Battery compartment
11 Exposure compensation/Up button23Wrist strap mount
12 Macro mode/ Right button
Camera views : E1035/E1235
megapix el
10.1
1 2
3
4
5
7
6
8
9
10
11
12
13
14
15
Front View
Back View
Right View
16171617
Top View
W
T
16
17
18
19
2021
22
23
Left View
Bottom View
1Flash13Self-timer/ Down button
2AF assist beam/Timer indicator14Func/ok button
3Lens 15Flash mode/ Left button
4Mic16Power button
5LCD screen17Shutter button
6Face detection AF button18Zoom scroll wheel
7Status LED19Speaker
8Mode dial20Tripod mount point
9Menu button21USB/ AV port
10 Erase button22Memory card
/ Battery compartment
11 Exposure compensation/Up button23Wrist strap mount
12 Macro mode/ Right button
Charging the battery (except A735/835/1030/1230)
1
2
1. Place the battery into the charger as shown.
2. Plug one end of the connecting cable into
the charger base.
3. Plug the other end of the connecting cable
into a wall outlet.
Throughout the rest of the manual, the
following illustrations show theE1035
model as an example.
(G2, A735, A835, A1030, A1230,E840s,
and E1235 operate similarly.)
Leave the battery to charge until the
charger light goes green.
(To maximize battery life, the rst charge
should be at least 4 hours)
1819
Inserting the battery
1. Open the battery compartment.
2. Insert the battery while observing
the correct polarity. Use the side of
battery to press down the stopper
as shown, allowing the battery to
be inserted properly.
3. Close the battery compartment.
Battery capacity decreases with usage.
2021
Inserting the battery (A735/A835/1030/1230)
1. Open the battery compartment.
2. Insert the battery while observing
+
-
-
+
the correct polarity. Use the side of
battery to press down the stopper
as shown, allowing the battery to
be inserted properly.
3. Close the battery compartment.
Inserting an optional SD/SDHC card
1. Open the battery compartment.2. Insert an optional SD/SDHC card into
the memory card slot as shown.
Optional SD/SDHC cards are not included.
The use of 64MB to 4GB memory cards from
recognized manufacturers such as SanDisk,
Panasonic and Toshiba is recommended for
reliable data storage.
22232223
W
T
Power button
3. Close the battery compartment.
To remove the SD/SDHC card, open the battery
compartment and gently push the card to
release it. Pull the card carefully.
Turning on and o
Press the Power button to turn the camera
on. To turn o the camera, press the Power
button again.
When turned on, the camera will enter the
mode according to the mode dial setting. You
can also turn the mode dial to change the
modes after the camera is turned on.
Using the Mode Dial
The GE camera provides a convenient mode dial that allows you to switch between dierent
modes with ease. All the available modes are listed as follows.
Mode NameIconDescription
Auto
Playback
MovieSwitch to record videos.
Switch to take still pictures. (The camera uses the default programmed automatic settings.)
Switch to view the pictures/videos stored in the memory card and
internal memory.
Image Stabili-
zation
Scene
PortraitSwitch to portrait mode when taking close-up portrait photos.
Panorama
Manual
2425
Switch to use Image Stabilization when taking still pictures.
Switch to use a preset scene mode for taking still pictures.
There are 12 scenes in total.
Switch to capture a sequence of shots and stitch them together into a
panoramic photo.
Switch to take still pictures in manual mode, where many camera settings can be congured. (Recommended for advanced users only)
Setting date/time and language
To set the language, date, and time, the following
settings need to be congured in the
menu.
• Date / Time
• Display language
Setup
To access the
1 .Press
2. Press the button and use
Right
Setting the Date and Time
1. Use the
Then press the
Setup
Power
to select the
Up/Down
menu, do the following:
to turn the camera on.
Setup
Right
menu.
to select
to enter the setting.
Up/Down/Left/
Date/Time
.
2. Press the
and use the
3. Press the button to conrm the setting.
Setting the Language
1. Use the
Then press the
26272627
Left/Right
Up/Down
Up/Down
to highlight each eld
to adjust the value.
to select
Right
to enter the setting.
Language
.
2. Use the navigation buttons to select the
desired language.
3. Press the button to conrm the setting.
The Set date/time and language screen
will automatically appear when the
camera is turned on the rst time.
Loading...
+ 85 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.