GE 98061 User Manual
WebCam with Earset
Model 98061
rev. 12/18/07
Table of Contents
How To Install And Use The PC Camera ..........................................................................................01
Install Driver………………………..…………………………………. ....................................................................01
How To Use Your Headset with your PC ..........................................................................................02
How To Use Your PC Camera…………………………………………….. ..........................................................03
How To Install MSN® Messenger (For Windows 2000/XP/Vista) .........................................04
How to use the camera with MSN Messenger ............................................................................04
Getting Started With ArcSoft VideoImpression ............................................................................05
Getting Started With ArcSoft PhotoImpression ............................................................................12
Warranty ........................................................................................................................................................14
FCC Statement .............................................................................................................................................14
Instrucciones en Español ........................................................................................................................15
How to Install and use the PC Camera
Installing the camera driver
Use Installer to install camera driver (Recommended)
Don’t connect the camera to your computer yet!
To install the driver:
1. Insert the CD into your CD-ROM drive; the installer screen will automatically come
up. Click the “Install Device Driver” button to start installing.
Note: If the installer screen does not come up automatically, click Start, then Run and
execute the file “launch.exe” on the CD to start the installer program.
2. Install Application Software. Check the box in front of the Software you would like
to install, then click the “Install Application Software” button to start installing, then
follow the instructions to proceed installation.
3. When installation completes, the Application Software group will appear as a
folder on the Programs Menu. To start the Application software, click “Start”, point
to “Programs”, and then click the Application software.
1
How To Use the Headset with your PC
1. Place snugly in ear.
2. Plug the 2.5mm plug into the black end of the Headset Adaptor. Plug the other end
of the Headset Adaptor into your PC. Earset can be plugged in or disconnected
without interrupting call.
3. NOTE: Mute switch will act as answer/off function for some phone models.
4. To change earcup: Carefully pry the edge of the silicone earcup away from the
earbud post and pull gently to separate. Position the new earcup over the post and
press gently into place.
Phone Headset
Auriculares
Laptop
Laptop
In-line Mic with Mute Switch
Micrófono en línea con
interruptor de silencio
Jack
Enchufe
hembra
Plug
Clavija
Headset Adapter
Adaptador de
auriculares
2
How To Use Your PC Camera
1. Plug PC camera’s connector to the USB port on your computer.
2. Set the Focus
a. Start VideoImpression.
b. Select “Capture Video”
c. Turn the focus ring until image becomes sharp.
3. Video Recording:
a. Start VideoImpression.
b. Select “Capture Video”
c. To start video recording, click on “Record ” .
d. To stop video recording, click on “Stop ”.
e. To save captured video, Produce Drive Microsoft AVI file, type
file name and press ”Start” button
3
How To Install MSN Messenger
For Windows Vista/XP/2000
1. Please log on to http://messenger.msn.com to download.
2. After the installation package is downloaded to your computer, it will start
installing MSN Messenger. All you have to do is follow the instructions.
3. After the installation is completed, click Start, point to Programs, and click MSN
Messenger.
4. After you run Messenger for the first time, you can add friends to your list and
send instant messages.
How to use the camera with MSN Messenger
1. Plug the PC camera into your PC first.
2. Click the “Messenger” to go to the main screen
3. Click the Webcam icon during a conversation. Or, click the Actions menu on the
main window, click Start a Webcam
Conversation, select the name of the person you want to send video to, and
then click OK. For a 2-way webcam conversation, both participants must have a Web
camera and each person must invite the other.
4. To stop sending your video image during a conversation, click the arrow under
your video window, and then click Pause Webcam or Stop Webcam. You can
continue to receive the other person’s image, but your image will freeze in your
contact’s conversation window.
4
Getting Started With VideoImpression
When you first run the program, a window will appear that lets you choose the type
of project you want to make (you can also open previously saved projects). Choose
“Create a New Video.” A new window will appear. It will contain multiple options for
gathering your video content.
For this walk-though, choose “Get From Album.” Even if you choose one of the other
options, you’ll end up at your albums soon or later. Albums contain shortcuts to files
stored on your system. You’ll grab most of your “media” for movie construction from
your albums.
5
Media
This first step is where you select the “media” (still images, videos, and sound clips)
that you want to use to create your movie. All you need to do is choose the
components you want and add them to the Storyboard. When you save—or “produce”—your movie, all the components on the Storyboard will be combined together
into a single video file.
Let’s look at the Storyboard again:
Video Clips & Still Images
Transitions
Audio Tracks
The Storyboard
The large squares are reserved for still images and video clips. The two horizontal
bars beneath are reserved for audio tracks. The smaller squares between the still image/video clip components are for “transitions.”
6
Edit
You’re now ready to touch up and modify your movie components. Different editing
options are available depending on the component type.
Modifying Image And Video Brightness/contrast
1. Single-click the desired still image or video clip on the Storyboard.
2. Click and drag the sliders to your liking. You can preview the effect within
the Player.
Trimming Videos And Audio
1. Select the desired video or audio clip on the Storyboard.
2. Drag the Starting Mark to the spot where you would like the clip to begin
playback.
3. Drag the Ending Mark to the spot where you would like the clip to end.
7
Effects-transitions
The third step in the creation process lets you add cool scene transitions
between each still image or video component on the Storyboard.
Transitions are effects that occur as one movie component changes to
another. You can add/delete transitions in the same way that you add/delete media components. Click the “Randomize” button to automatically add
a random transition to each spot. You can go back to Step 2 to modify the
display time for your transitions as well.
Text
This step lets you add text over any still image or video component on the
Storyboard. Click on the component you want, then type in your text. You
can modify all the standard parameters, such as font, size, style, alignment,
and color.
You can also add a shadow. To do this, check the Shadow box. Click and drag
within the preview to position the shadow behind the text. Use the sliders to
adjust the shadow blur and intensity.
8
Loading...