GE 83299 User Manual [en, es]

This reminder is provided to call the CATV system installer’s atten-

tion to Article 820-40 of the NEC that provides guidelines for proper

WARNING: To prevent fi re or shock hazard, do not expose this product

to rain or moisture. This unit for indoor use only.

CAUTION

The lightning fl ash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of suffi cient magnitude to

constitute a risk of electric shock to persons.

The exclamation point with an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

Your Video Converter (RF modulator) is designed to convert the

THE FCC WANTS YOU TO KNOW

This device complies with Part 15 of FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harm-

ful interference, and (2) this device must accept any interference

Your modulator might cause TV or radio interference even when

Try to eliminate the interference by:

circuit from the receiver

The following items (not supplied) are required to connect your RF

(AV23216), or

want to use this RF modulator in a horizontal position.

This reminder is provided to call the CATV system installer’s attention

to article 820-22 of the NEC which provides guidelines for proper

the red and white RCA connectors to

the audio out from the VCR or DVD

white.

the yellow video out from the VCR or

white to white and yellow to yellow.

the other end of the 75 ohm coax

TV.

AC power outlet.

to the Ant In on the back of the TV.

ANTENNA OR SATELLITE

wallplate:

to the Ant In on the RF modulator.

tor.

A/V cable into the video and audio in-

the AUDIO L jack).

video and audio jacks on the video

to the RF Modulator following these

VHF/UHF terminal, and reconnect it

to the RF Modulator’s Ant In terminal.

terminal on your TV.