7 FT SPIRAL TREE
Assembly Manual- 847966/ 847967
PRINTED IN CHINA MADE IN CHINA
©2017 Nicolas Holiday Inc., 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560. All rights reserved.
Model No.: 82009LO / 82011LO
Electrical Rating: 120V，60Hz，17.1W, 0.15A
Size：7FT
Operating Temperature: -5℉ to 95℉ (-20℃ to 35℃)
Application: Indoor and Outdoor Use
PREPARATION
Before beginning product installation, make sure that all parts are complete. Check parts with package
contents list provided. If any parts is missing or damaged, do not attempt to assemble, install or operate the
product.
Estimated Assembly Time: 5-10 minutes
No tools required for assembly.
The item drawing may slightly vary from the actual product.
PACKAGE CONTENTS
PART
DESCRIPTION
QUANTITY
A
Star 1 B
Spiral Neon Flex Light
1
C
Pole Sections
3
D
Base Stand
1
E
Ground Stake
4
F
Spring
4
G
Zip Tie
5
Notes:
1> Star A and Spiral Neon Flex Light B are connected.
2> Spring F and Spiral Neon Flex Light B are c onnected by 4 nylon strings, so there is one spring per
nylon strand.
7 FT SPIRAL TREE
Assembly Manual- 847966/ 847967
PRINTED IN CHINA MADE IN CHINA
©2017 Nicolas Holiday Inc., 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560. All rights reserved.
ASSEMBLY INSTRUCTIONS
1> Unpack the package box and take out all t he contents.
2> Open and lay-out the Base (D) on the selected location and make sure that it is sitting flat and stable.
Assemble the three (3) Pole Sections (C) together to create one pole assembly. Insert the assembled
pole into the base. (as shown in the figure 1)
3> Place the Spiral Neon Flex Light (B) on the top of the pole by inserting pole tip onto the spiral frame
center hole and allow the rest of Spiral Neon Flex Light to stretch towards the ground, creating
appearance of tree. Place the Star (A) on top of the tree assembly. (as shown in the figure 2)
4> Secure the tree body by Springs (F) t o the hooks along t he ends of the Base (D). (as shown in the
figure 3)
5> If you are using this tree as an outdoor decoration, use the provided Ground Stakes (E) to secure the
tree to the ground. (as shown in the figure 3)
6> Plug the tree into a GFCI-protect ed outlet to turn the tree lights on.
Figure 1 Figure 2 Figure 3
Loading...