GE 24116 User Manual
24116
Universal Remote
Instruction Manual
Table of Contents
Introduction .................................................................. 3
Button Functions ....................................................... 4
Initial Setup ................................................................... 6
Battery Installation .............................................6
Battery Saver ......................................................... 6
Code Saver ............................................................. 6
Power-On default ................................................ 6
Code Setup ............................................................. 6
Direct Code Entry ....................................................... 7
Code Search ................................................................. 8
Code Identification Feature .................................. 9
Setup .............................................................................10
Programming Combo Device Codes ........10
Controlling Combo Devices ..........................10
Controlling Devices with Separate Power
On and Off .............................................................10
DVD/DVR Punch-Through Feature ............11
Volume/Mute Control Feature .....................11
Setting All Volume/Mute Control, Punch-
through ...................................................................12
Setting any Mode to use its own
Volume/Mute .......................................................12
Troubleshooting .......................................................13
2
Introduction
Congratulations on your purchase of the
24116 Universal Remote Control. It is one
of the most unique looking, and easy to use
remote controls available today. With the
24116 Universal Remote, juggling multiple
remote controls is a thing of the past.
Your 24116 Universal Remote controls up
to 4 devices, including the most popular
brands of TV, DVR, DVD, SAT, CBL, and audio
equipment.
Note: Some functions from your original
remote may not be controlled by the 24116
Universal Remote. Use the original remote,
if available, to control such functions.
Sometimes buttons other than described
in these instructions may actually perform
the function. For example, the CHAN and
VOL buttons might be used to navigate
through menu choices. We recommend you
experiment with the remote to identify if
such situations pertain to your equipment.
The 24116 Universal Remote is easy to
use, easy to program, and it gives you total
control—at the touch of your fingertips!
3
Button Functions
1.
2.
3.
4.
5.
6.
7.
20.
19.
18.
17.
16.
15.
14.
8.
9.
10.
Note: The Record button must be pressed TWICE to record.
For some brands of VCRs, you might need to press the
Record button once, then press it again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.g., LAST may be called RECALL, or ENTER
may be called DISPLAY. These differences depend on the
brand and model of your product. Also, this remote can
only operate features that exist on your product. E.g., your
product must have LAST ability for the LAST button to
operate this feature.
4
13.
12.
11.
Button Functions, cont.
1. ON-OFF: Turns device On or Off.
2. Red Indicator: Lights when any button is pressed.
3. TV, DVD, CBL/SAT, DVR/AUX: Selects product to
be operated.
4. MUTE: Turns off the TV sound while the picture
remains.
5. VOLUME UP/DOWN: Changes the volume level of
the product, normally the TV.
6. UP, DOWN, LEFT & RIGHT: Navigation buttons.
7. MENU: brings up the DVD disc Menu screen. Use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
8. ENTER: Used after direct channel number entry to
immediately change to the selected channel.
9. NUMBERS: Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
10. ( ) Used for digital channels, e.g., 2.3.
•
11. RECORD, PLAY, STOP, REW, FF, PAUSE: Control
buttons that operate your DVR even when the
remote is set to operate the TV. Also operates
DVD Scan -/+.
12. INPUT/TV/VCR: Selects the video inputs of your
TV if equipped with that feature. Operates the
same as the TV/VCR button on your original remote.
13. INFO: Displays on-screen channel information,
etc.
14. GUIDE: Displays satellite or cable on-screen pro-
gram guide.
15. EXIT: Exits On-Screen Menus and/or Returns to
previous On-Screen selection.
16. LAST: Returns to the previously selected channel,
or DVD repeat toggle.
17. OK: Selects menu items for the device you are
controlling.
18. CHANNEL UP/DOWN: Changes the channels. Also
controls DVD/CD CHAPTER +/- track selection,
i.e., DVD/CD Track Skip Up/Down. Note the DVR
buttons also control the DVD when in DVD Mode.
19. SETUP: Used for setting up your remote.
20. BACKLIGHT: Backlighting On/Off.
5
Loading...