GE 22729 User Manual

Digital Converter Box
Digital Converter Box will
automatically shut off
- For energy savings the unit is shipped with sleep mode enabled at four hours as required by the governing agency. To adjust the setting or turn sleep mode off. See pg 14
IMPORTANT NOTICE
!
See Back Cover for
SPECIAL OFFER!
User’s Manual
Table of Contents Introduction 3
Warnings/Safety 5-7
Getting Started 8
Battery Installation 8
Converter Box 9
Remote 10
Connection 11
Converter Box Installation 11
Setup 12
Navigating the Menu 13
Apps 13
Channels 14
Screen Format 15
Parental Control 15-16
Closed Caption 17
Time Zone 18
Factory Default 18
Features 19
Troubleshooting 20-21
FCC 22
Specifications 23
2
Warranty 23
The Digital Transition
Congratulations you are now prepared for the digital transition. When analog signals end, you will not be left with a blank screen on the TV. Instead, the GE Digital Converter Box will receive the new digital signals and convert them so you can continue to watch free “over-the-air” broadcasts on your analog TV.
It is truly an exciting time in television history. In the same way, the black & white transformation to color dramatically improved the TV. Digital Television will heighten your TV experience.
Advantages digital television has to offer include superior picture quality, improved sound quality, electronic programming guide and more channels. That’s right! Depending on the broadcast area; you may receive two, three, or even four more times the channels.
Thank you for choosing GE!
3
Risk of electric shock
• Keep children away
• Do not use in wet locations
Risk of fire
• Do not exceed electrical ratings
WARNING
To reduce the risk of electric shock
• Do not take the cover off
• No part of the receiver can be repaired by the user
• Please consult a qualified technichian for any repairs
WARNING
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precautions
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING:
To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous voltage is present inside the product. Do not remove the product enclosure.
4
CAUTION:
Insert the power plug into the wall outlet with AC power of 120V/50-60HZ. The AC plug is polarized and will only go in the socket one way. Contact a licensed electrician, if you can not get the plug to fit securely in the socket.
Important
Safety Notes
1. INSTRUCTIONS:
Read and follow all safety and operating instructions before operating this product. Heed all warnings on the product and all warnings contained in the user’s manual. Be sure to keep these instructions for future reference.
2.
CLEANING:
Use a dry cloth only.
3. VENTILATION OPENINGS:
Never block the ventilation openings on the enclosure of the product. Do not place anything on top of the product. Avoid operating the Digital Converter Box in enclosed areas like cabinets and bookcases. Do not place the product on soft surfaces such as a bed, sofa, carpet, rug, near drapes, curtains, or walls.
4. OBJECT AND LIQUID ENTRY:
Never push objects of any kind into the ventilation openings of this product. Doing so may result in personal or property damage or injury, including fire or electrical shock. Never spill liquid of any kind on the product.
5. HEAT:
6. POLARIZED PLUG:
For safety reasons, this product is equipped with a polarized alternating current line plug with one blade wider than the other. It will only fit into the AC wall socket one way. Do not attempt to defeat the safety feature of the polarized plug. If you have difficulty fully inserting the plug, contact a licensed electrician for help.
7. POWER CORD PROTECTION:
The power cord of this product should be routed to avoid being walked on or pinched at plugs, receptacles and the point where exiting from the Digital Converter Box.
8. ATTACHMENTS:
Install product away from any heat sources such as radiators, heat registers, stoves, or other devices that generates heat. Avoid placing the Digital Converter Box on top of all potential heat sources like amplifiers.
Only use attachments and accessories recommended by the manufacturer.
5
Important
Safety Notes
9. LIGHTNING:
Power surges that may occur due to lightning can damage sensitive electronics. Unplug the product from wall power and disconnect the antenna from the Digital Converter Box during lightning storms and when unused for long period of times.
10. SERVICING:
There are no user serviceable parts within this product. This product should be serviced by qualified personnel only. Do not attempt to service this product yourself. Servicing is required when the product has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Digital Converter Box, the Digital Converter Box has been exposed to rain or moisture, does not operate normally, or has been dropped.
11. OVERLOADING:
Do not overload wall outlets, extension cords or convenience receptacles as this can result in a risk of personal or property damage or injury, including fire or electric shock. Always operate any electrical device in accordance with applicable electrical codes.
12. WATER AND LIQUIDS:
Do not use this product near any sources of water such as a bath tub, kitchen sink, swimming pool, basement, washing machine. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with liquid, or candles on top of the Digital Converter Box.
6
Important
Antenna Lead-In Wire
Ground Clamp Electric Service
Equipment Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductors
(NEC Section 810-21) Grounding Clamps Power Service Grounding
Electrode System (NEC Art 250, Part H)
Safety Notes
13. ELECTRIC SHOCK:
Do not remove the enclosure of the product. There are no user-serviceable components. All service/repair should be carried out by qualified personnel.
14. POWER SOURCE:
Use only the type of power source indicated in the product specifications. If you are uncertain about the power supplied to your home, consult a certified electrician.
15. SMOKE:
If the device should emit smoke or unusual odor, immediately disconnect the power cord from the wall outlet. Have the Digital Converter Box serviced by a licensed technician.
16. BATTERIES:
Spent or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed information, contact your local county solid waste authority.
17. Keep a 4 inch minimum distance around the Digital Converter Box for sufficient ventilation
18. Outdoor Antenna Grounding: If the outside antenna is connected to the digital Converter Box, make sure the antennas system is grounded. This will provide some protection against built-up static charges and voltage surges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-dicharge unit, size of grounding conductors, location of antenna-dicharge unit, connection to grounding electrode, and requirements for the electrode.
7
Loading...
+ 16 hidden pages