GE 19215 User Manual

Direct Wire Push Button

Replaces current chime push button

Note: This button is not recommended for use on
systems which exceed 16 volts.

Installation
Push buttons ore typically mounted at the some
height above the door sill os the door knob or handle
between 36" and W above the sill. Locate the two
door chime wires emanating from the existing door

chime circuit. Test
the door chime by
touching the two

wires together,

§mmmmm

completing the
circuit. If door chime
does not sound,

check transformer
or chime. Turn off

power. Attach one

wire to each of the

screw terminals on
the bock of the

button. Mount

button in desired

location with two
screws provided.

Install according to
applicable local
electrical codes.

screw —
terminals

From

Wall