GD Midea Air conditioning Equipment MDNA18 User Manual
NOTE:
Company will not be liable for any issues
and problems caused by Internet, Wi-Fi
Router and Smart Devices. Please contact
the original provider to get further help.
CE-OSK201
20180511
USER MANUAL OF SMART Kit
IMPORTANT NOTE:
Read the manual carefully before installing or
connecting your Smart kit. Make sure to save
this manual for future reference.
Product name: Smart Kit
Model：CE-OSK201
FCC ID: 2ADQOMDNA18
IC: 12575A-MDNA18
This device complies with Part 15 of the FCC Rules and
RSS 247 of Industry & Science Canada. Operation is
subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not
be less than 20cm (8 inches) during normal operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
Company name/address:
GD Midea Air-Conditioning Equipment Co.,Ltd
Add: Midea Industrial District , Beijiao ,Shunde, Foshan, Guangdong ,
Peoples Republic of China
CONTENTS
1
SPECIFICATION
PRECAUTIONS....................................................1
2
DOWNLOAD AND INSTALL APP ...........................2
3
INSTALL THE SMART KIT .....................................3
4
USER REGISTRATION .........................................4
5
NETWORK CONFIGURATION ...............................5
6
7
HOW TO USE APP ..............................................13
8
SPECIAL FUNCTIONS ........................................15
DECLARATION OF CONFORMITY
Hereby, we declare that this smart kit is in compliance
with the essential requirements and other relevant
provisions of Directive 2014/53/EU. The declaration
of conformity may be consulted with sales agent.
...................................................1
SPECIFICATION
1
Model: CE-OSK201
Standard: IEEE 802.11b/g/n
Antenna Type: Wxternal omnidirectional Antenna，
Frequency:WIFI：2412-2462MHz
Maximum Transmitted Power: 20dBm Max
Operation Temperature:0 C~45 C/32 F~113 F.
Operation Humidity:10%~85%
Power Input: DC 5V/300mA
PRECAUTIONS
2
Applicable system: IOS, Android.
Note:
APP can not support the latest software version of
Android and IOS system.
Due to special situation may be occurred, we explicitly
claims below: Not all of the Andriod and IOS system
are compatible with APP. We will not be responsible
for any issue as a result of the incompatibility.
Wireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK encryption
and none encryption . WPA-PSK/WPA2-PSK encryption
is recommended.
Caution
Please Check The Service Website For More Information.
Smart Phone camera needs to be 5 million pixels or
above to make sure scan QR code well.
Due to different network situation, sometimes, request
O O O O
1
Loading...