GC Electronics 10-4302, 10-4308 Catalog Page

CHEMICALS

Phone [phone]•Fax [phone]

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

CHEMICALS

52

SOLVENT RELEASE ADHESIVES

Most lacquer, rubber or plastic base adhesives are the solvent-release type. They are universal and easy to apply with no special prepara­tion required. However, they are limited in their application as they are not suitable for cementing non-porous surfaces such as metals,
glass, glazed ceramics and others, due to the inability of the solvent to evaporate quickly, except around the edges. They do work very well
if one or both of the bonding surfaces consists of material which has some porosity.

Rubber-to-Metal Cement II

A heavy-bodied, rubber-based cement with
outstanding bonding qualities to many
materials such as natural and synthetic rubber,
metal, wood and plastics. Dries quickly and
produces a lasting, flexible bond which often
exceeds the strength of the material itself. Used
to cement any rubber or flexible plastic part to
cabinets, chassis or panels; also for gaskets,
weather strips, etc. Ozone friendly.

Part No. 10-354

2 fl. oz. Bottle with Brush

Replaces Part No. 10-352

Acrylic Cement

Consists of solvent for acrylics (plexiglass,
lucite and others), slightly thickened with
dissolved acrylic resin. It actually “welds’’
items made of plexiglass. The joint is
usually invisible and stronger than the
material itself. Cements many

items used in
electronics for decorative or functional
purposes as well as acrylic signs, art objects
and decorative pieces.

Part No. 10-4002

2 fl. oz. Bottle with Brush

Part No. 10-4008 8 fl. oz. Bottle with Brush

N.S.N. 8040-00-209-1346
N.S.N. 8040-00-259-6181
N.S.N. 8040-00-503-0315

Vinylite Cement

Vinyl resin-base cement that is waterproof,
almost invisible and has excellent resistance
to moisture, most acids and alkalis. Used to
cement items made of rigid or flexible vinyl,
wood, cardboard, paper, metal, plastics,
and glass. Very flexible. Lends itself
particularly well to items where a rigid
bond is not desirable.

Part No. 10-5802

2 fl. oz. Bottle with Brush

N.S.N. 8030-00-264-3838

General Purpose Plastic Cement II

A solvent-release adhesive with a special
Nitrocellulose Lacquer Base. The bond is
hard, but not brittle. Adheres especially well
to plastics, paper, leather, ceramics and
metal. Quick-drying and waterproof. Widely
used by repairmen, model builders,
hobbyists and do-it-yourselfers. Ozone
friendly.

Part No. 10-327

2 fl. oz. Bottle with Brush

Replaces Part No. 10-324

GC Bond

Thermoplastic adhesive based on synthetic
components with unusually strong bonding
characteristics to most materials. Produces a
waterproof, resilient and long-lasting
flexible bond. Light tan in color. GC Bond’s
uses range from cementing paper and
cardboard to cementing electronic
components to circuit boards and chassis.
Sticks well to all metals and glass. Dries in 15
to 30 minutes.

Part No. 10-4302

2 fl. oz. Bottle with Brush

N.S.N. 8040-00-682-6690

Part No. 10-4308 8 fl. oz. Bottle with Brush

N.S.N. 8040-00-181-7710

Service Cement

A quick-drying and waterproof clear adhesive
which forms a strong, hard but vibration-
resistant bond with minimal shrinkage. A true
universal adhesive for shop, industry, home
and hobby use. Ideal for speaker repairs. May
also be used for gluing porous or semi-porous
materials to each other or to metals, plastics,
etc. Not suitable for metal-to-metal, glass-to-
metal or other non-porous to non-porous
surfaces, for which Perma-Bond, GR-R-RIP or
epoxy cements are more suitable.

Part No. 10-302

2 fl. oz. Bottle with Brush

Part No. 10-310 1 gal. Can