GBS FOOD SERVICE EQUIPMENT F-P30-14 User Manual
Ultrafryer Systems, Inc.
F-P30-14 High Efciency/
High Production Gas Fryer
Standard Features:
● High efciency Par-3 heat exchanger
● 45 lb shortening capacity
● Dial thermostat inside cabinet
● Stainless steel vat, cabinet and frame
● Pilotless electronic ignition
● Heavy duty casters with front locking brakes
● 2 baskets
● Drain cleaning rod and vat cleaning brush
Options and Accessories:
□ 2 product Ultrastat® computer controller
□ 8 product Ultrastat® computer controller
□ Vat joiner strips to join 2 or more fryers
□ Splash guard (left side and/or right side)
□ 3/4” x 48” gas quick disconnect
□ Vat cover
Specications
Designed to meet high production frying needs with low energy cost
Project __________________
Item ____________________
Quantity _________________
Approval _________________
Date ____________________
F-P30-14 45 lb. Gas Fryer
The Ultrafryer Systems F-P30-14 is a oor model
fryer designed to meet high volume frying needs
while providing the maximum in energy savings. The
fryer is Energy Star listed and greatly exceeds the
standard with a cooking energy efciency of 64.7%.
The fast recovery of the Ultrafryer F-P30-14 reduces
cooking time and lowers shortening consumption. Dial
thermostat and electronic ignition allow for accurate
temperature control and ease of operation. The
phased array heat exchanger provides a large surface
area and extended path of travel for the combustible
gases ensuring fast recovery, uniform heat distribution
and low exhaust temperatures of 500ºF or less.
ASTM Performance Results
Heavy Load Extra Heavy Load
Load Size (lb) 3 4
French Fry Cook Time (min) 2.29 2.43
Average Recovery Time (sec) <10 <10
Production Rate (lb/hr) 72.7 ± 2.4
Energy Consumption (BTU/lb) 899 912
Cooking Energy Rate (BTU/hr) 65,370 83,480
Cooking Energy Efciency (%) 64.7 ± 1.8 62.5 ± 2.4
a
This range indicates the experimental uncertainty in the test result based on a minimum of three test runs.
The F-P30-14 cabinet and door are fabricated from high
quality stainless steel to ensure a long service life.
The F-P30-14 is equipped with a screw-in front drain
pipe for easy shortening ltration and/or disposal.
The F-P30-14 has a maximum shortening capacity
of 45 lbs. (22 liters). The cooking zone is 14” x
14” (356mm x 356mm) with shakezone and a 7”
drainboard.
The F-P30-14 is rated 90,000 BTU/h.
a
a
91.5 ± 1.6
a
a
Ultrafryer Systems, Inc. • 302 Spencer Lane • San Antonio, TX 78201 • (800) 545-9189 • (210) 731-5000 • FAX (210) 731-5099 • www.ultrafryer.com
CASTERS
40.00
15.75
TOP VIEW
FRONT VIEW SIDE VIEW
36”
GAS HOOKUP
ELECTRICAL AND
7”
8’
7.25”
4.25”
GAS
HOOKUP
3/4” LINE
ELECTRICAL
HOOKUP
CORD
The casters are
3” phenolic roller
Patented PAR3 Gas
heat exchanger
w/ vortex boxes
bearing type casters.
Standard on every
fryer.
Dimensions - inches (mm)
Model Shortening Overall Size Drain Net Shipping Info
No. Capacity Height Weight
F-P30-14
45 lbs.
(22 Liters)
Height Depth
40”
(1016)
(914)
36”
Width
15 3/4”
(400)
18”
(458)
250 lbs.
(113.4 kgs)
F.O.B. Factory
San Antonio, Texas
ELECTRICAL AND GAS REQUIREMENTS
PERFORMANCE SPECIFICATIONS
FOR OPERATING SYSTEM
Determined in accordance with ASTM F
120 V, 60 HZ, 1 phase, 3.0 amps.
1361-91 Standard Test Method for the
performance of open deep fat fryers:
GAS INLET PRESSURE PER VAT
REQUIRED:
7” water column natural gas
14” water column propane/butane
Due to continuing engineering development and improvements, specications are subject to change without notice.
Ultrafryer Systems, Inc. • 302 Spencer Lane • San Antonio, TX 78201 • (800) 545-9189 • (210) 731-5000 • FAX (210) 731-5099 • www.ultrafryer.com
© October 20, 2008 Ultrafryer Systems, Inc.
Nominal Energy Shortening
Vat Size Input Rate Capacity
14” 90,000 BTU’s 45 lbs.
Loading...