GBC ShredMaster GLS3230, ShredMaster GLHS930, ShredMaster GLX2030, ShredMaster GLM1130 Instruction Manual
GLM1130
GLHS930
GLS3230
GLX2030
Document Shredders
Déchiqueteuses
Destructoras de documentos
To register this product go to www.gbc.com
Pour enregistrer ce produit, allez sur www.gbc.com
Para registrar este producto visite www.gbc.com
ShredMaster
®
Instruction Manual
Manuel d’utilisation
Manual de instrucciones
GLM1130
11 sheets
Continuous operation
120V AC / 60Hz
10.0A
Yes
Models
Sheet Capacity -
Duty Cycle Volts / Hz
Amperage
CDs and Credit Cards
GLHS930
9 sheets
Continuous operation
120V AC / 60Hz
8.0A
Yes
GLM1130
11 feuilles
Utilisation continue
120 V CA / 60 Hz
10,0 A
Oui
Modèles
Capacité de coupe -
Cycle d’utilisation Volts / Hz
Intensité de courant
CD et cartes de crédit
GLHS930
9 feuilles
Utilisation continue
120 V CA / 60 Hz
8,0 A
Oui
GLM1130
11 hojas
Operación continua
120 V CA / 60Hz
10.0A
Sí
Modelos
Capacidad de hojas Ciclo de trabajo Voltios / Hz
Consumo
Tarjetas de crédito y CD
GLHS930
9 hojas
Operación continua
120 V CA / 60Hz
8.0A
Sí
Specifications
GLS3230
28-32 sheets
Continuous operation
120V AC / 60Hz
11.0A
Yes
GLX2030
20 sheets
Continuous operation
120V AC / 60Hz
10.0A
Yes
Models
Sheet Capacity -
Duty Cycle Volts / Hz
Amperage
CDs and Credit Cards
Spécifications :
GLS3230
28-32 feuilles
Utilisation continue
120 V CA / 60 Hz
11,0 A
Oui
GLX2030
20 feuilles
Utilisation continue
120 V CA / 60 Hz
10,0 A
Oui
Modèles
Capacité de coupe -
Cycle d’utilisation Volts / Hz
Intensité de courant
CD et cartes de crédit
Especificaciones
GLS3230
28-32 hojas
Operación continua
120 V CA / 60Hz
11.0A
Sí
GLX2030
20 hojas
Operación continua
120 V CA / 60Hz
10.0A
Sí
Modelos
Capacidad de hojas Ciclo de trabajo Voltios / Hz
Consumo
Tarjetas de crédito y CD
IMPORTANT: ONLY INSERT ONE CD OR ONE CREDIT CARD AT A TIME.
Sheet capacity may vary with voltage.
English………………p.3-8
Français………………p.9-14
Español………………p.15-20
IMPORTANT : INSÉREZ SEULEMENT UN CD OU UNE CARTE DE CRÉDIT À LA FOIS.
Feuilles mai varient en fonction de la tension.
IMPORTANTE: INSERTE SÓLO UN CD O TARJETA DE CRÉDITO POR VEZ.
Hojas de capacidad puede variar con el voltaje.
3
Indicator Panel
Models: GLS3230, GLX2030 Models: GLM1130, GLHS930
1 2 3 4
j
a
d
f
e
g
b
c
h
i
j
a
d
f
e
g
b
c
h
i
4
Shredders are safe to use as long as you take a few
safety precautions.
• Ensure the machine is plugged into an easily accessible
power outlet, and ensure the cable is not likely to trip up a
passer by.
• Any attempt to repair this unit by unqualied personnel will
invalidate the warranty. Please return to supplier.
• Unplug your shredder before moving it or when it is not in
use for an extended period of time.
• Do not operate with a damaged power supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
• Do not overload electrical outlets beyond capacity as this can
result in re or electrical shock.
• The socket-outlet should be installed near the equipment and
should be easily accessible.
• Do not alter the attachment plug. The plug is congured for
the appropriate electrical supply.
• Do not use near water.
• Do not use aerosol dusters or cleaners.
• Do not spray anything into the shredder.
• Although this shredder has been designed to be child safe, it
is not advised to operate the machine near children and pets.
Introduction
Thank you for choosing this shredder from GBC®. We are sure it will serve you well, but please take a little time to study these
instructions to ensure you get the best out of your machine.
a Indicator Panel
b Door for Bin
c Wheels
d Power On/Off Button
e Reverse Button
f Auto Button
g Forward Button
h CD Slot
i Anti-jam Indicator
j Oil Reservoir Cap
1 Oiling in Operation
2 Oil Level
3 Door Open
4 Bin Full
Lights and Icons Explained
Indicator Panel
Anti-Jam Indicator Auto Bin Full Door Open Oil Level Oiling/Auto
Color of LED Red Green Blue Red Red Red Green
Power On/Off Switch
Auto Mode light light
Forward Mode light light
Reverse Mode light light
Jam-free Technology light light
Bin Full light light light
Door/Bin Open light light light
Self Cleaning of Cutters light light
Sleep Mode
Auto Oiling in Operation light light
Oil Level Indicator light light
Safety First
90%
10%
90%
10%
CAUTION
When moving; shredder may fall over low obstacles.
5
Door Open Safety Function
If the door is opened during shredding, as a safety precaution
the shredder will instantly stop, and the door open symbol on
the indicator panel will ash red. To turn back to auto mode
simply press the auto button again (f).
Shredder Control Panel
CAUTION
ReverseForwardAuto
Safety First - Read instructions before use.
This means you should be careful because long hair can become
entangled in the cutting head. This could hurt you.
This means don’t reach into the feed opening of the cutting head.
This could hurt you.
This means be careful of ties and other loose clothing which could
become entangled in the cutting head. This could hurt you.
This means be careful of loose jewelry which could become
entangled in the cutting head.
This means keep children away from shredder.
This means do not shred CD’s.
Anti-Jam Technology
GBC® ShredMaster® Shredders will only shred stacks of paper
that are within the shredders sheet capacity. For example,
a shredder with a capacity of 22 sheets will not allow the
shredding of more sheets than this.
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams
are prevented.
This prevents time wasted through reversing paper and
unblocking jams not to mention the mess it can create.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder.
Alternating between the reverse and forward functions will help
unblock the feed area.
This means oil level.
This means oiling in operation.
Initial Setup of SelfOil™
The shredder is designed to automatically lubricate the cutting
mechanism as required to ensure the product continues to
work to its maximum performance and to extend the product
life. Before turning on the machine for the rst time, please
open the oil reservoir cap on the head of the shredder (j) and
pour in the 60ml bottle of oil provided as standard. This is
sufcient to allow the shredder to start for the rst time and to
operate continuously for approximately one hour of shredding
before the reservoir will need relling. Press and hold down the
Auto button (f) for 5 seconds to start the pump and prime the
system. This operation is only required the very rst time the
shredder is used. When the ‘Oil Rell’ indicator is illuminated
, ip up the oil reservoir cap (j) and rell the oil reservoir
using a bottle of standard GBC oil (1760049). The automatic
oiling operation lasts approximately 2 seconds and you
will hear the distribution pump during this time. Auto-oiling
operates after 15 minutes of shredding.
This means do not shred credit cards.
We only recommend the use of GBC®
ShredMaster® shredder lubricant to maintain
optimum performance and safety. GBC
accepts no liability for product performance
or safety if anything other than GBC®
ShredMaster® branded shredder lubricant is
used (Order Code 1760049).
WARNING
Do not use flammable oil.
Only GBC part number 1760049 is recommended.
Operation
• GLS3230 & GLX2030 only. After unpacking the product,
pull out the shredder bag frame and remove the CD shard
tray, which sits on top of the bag frame. Store this tray on
the bag frame as shown and use when you shred CD’s
or credit cards to separate waste for recycling. On the
GLM1130 and GLHS930 high security models, the CD tray
can be left permanently in position in the shredder.
• Flip up the oil cap and ll up the reservoir using the 60ml
bottle of oil provided*. Close the cap.
• Connect shredder to mains supply.
• Check that the on/off switch at the back of the machine is
switched to the ‘ON’ position.
• Press and hold down the Auto button (f) for 5 seconds to
start the pump and prime the system. Only required when
the product is used for the rst time.
• To commence shredding, press the auto feed button. This
sets the shredder into auto mode.
• Insert paper to be shredded into the feed area. The
shredder will detect the paper and start automatically.
• If the shredder is left in auto mode for more than 2 minutes
without being used, the shredder will automatically turn
back to standby mode in order to save power.
• The shredder will automatically ‘wake up’ from sleep mode
when paper is inserted into the shredder mouth. There is no
need to press the Auto button (f).
* Replacement oil bottle No. 1760049
CD and Credit Card Shredding
• A separate CD tray is provided to collect the shredded CD
shards. On the GLS3230 and GLX2030, ensure that this is
correctly mounted onto the standard shredder bag frame
before shredding CD’s or credit cards. The GLM1130 &
GLHS930 models are supplied with a separate CD bin,
which ts on the front of the bag frame. CD and credit card
shards should be disposed of separately from paper.
• Always shred CD’s and credit cards through the safety
guard slot (h). Only shred 1 credit card or 1 CD at a time.
• Empty the CD tray or CD bin after 8 credit cards or CD’s to
avoid waste spilling over into the paper waste bin.
GLS3230 & GLX2030 only. Remove the CD tray before
starting to shred paper again and store on the bag frame.
6
GLS3230/GLX2030 GLM1130/GLHS930
Shredder Accessories
Use GBC shredder bags to recycle shredded paper (1765021)
or plastic shredder bag (1765015). There are instructions
on the paper shredder bag on how to t it to the internal bag
support frame. A complimentary oil bottle and shredder bag is
included with the shredder.
Bin Full
When the bin is full the shredder will not function and the bin
full symbol will illuminate red.
When this happens you must empty the bin.
• Open the door and slide out the shredder bag support frame.
Carefully remove the shredder bag from the frame.
Once the shredder bag has been disposed of and replaced,
close the door and press the auto button to resume shredding.
Note: GLX2030, GLM1130, GLHS930 Models - Once the
shredder bag has been reinserted and/or cabinet door has
been closed, the shredder will run in reverse for two seconds,
stop for two seconds and then forward for two seconds to
clear away any remaining paper from the cutter mechanism.
This ‘self-cleaning’ mechanism is additional jam prevention
technology from GBC.
Service
We recommend these machines are serviced every 6-12
months by a GBC® service engineer - see the back of this
booklet for the contact details of your local service center.
7
Loading...