®
T/PUMP
TP500 / TP500C
Heat Therapy System
®
LISTED 304L
STANDARD (NORME)
C22.2 NO. 125 RISK
CLASS (CATEGORIE
DE RISQUES) NO. 2G
OPERATOR'S MANUAL
P/N 10569-000 12/98
CONTENTS
Safety Precautions ...................... 1
Introduction................................. 2
OPERATOR'S MANUAL
TP500/TP500C T/PUMP
BEFORE YOU BEGIN . . .
Read and understand this T/PUMP OPERATOR'S
MANUAL and all PRECAUTIONS (see page 1)
prior to using the T/Pump.
Features/Specifications .............. 3
Operating Instructions ............... 5
Storage/Cleaning......................... 7
Troubleshooting.......................... 8
Warranties................................... 9
RECEIVING INSPECTION
Check the shipping carton for damage immediately upon receipt.
If package damage is discovered, the device should be unpacked
with the carrier's agent present. Any claims for shortage or
damage must be filed with the delivering carrier by the
purchaser. Do not return pumps damaged in shipment to
GAYMAR without contacting our Technical Service Department
for advice (see phone numbers below). If damaged goods are
returned to GAYMAR without notifying the carrier, GAYMAR
will assume the repairs will be made at the customer's expense.
TO RETURN PUMPS TO FACTORY FOR REPAIR
OR EXCHANGE
Merchandise returned to GAYMAR must be accompanied by a
Return Goods Number (RG#), issued by GAYMAR, authorizing
goods to be returned. Call Customer Service or Technical
Service at
(716) 662-2551
1 800 828-7341
Advise model, serial number, and nature of problem. You will be
given a Return Goods Number (RG#).
www.gaymar.com P/N 10569-000 12/98
The serial number can be found on the back of the T/Pump (see
figure 2, page 3).
Should you desire, repairs can be made in your facility by your
own qualified personnel. Contact the GAYMAR Customer
Service Department to request a T/PUMP SERVICE MANUAL.
Call GAYMAR for spare parts required.
T/PUMP, T/PAD, Mul•T•Pad, Clik-Tite, and Gaymar are registered trademarks of Gaymar Industries, Inc. U. S. PATENT 4,068,870
© 1998. Gaymar Industries, Inc. All rights reserved.
OPERATOR'S MANUAL
TP500/TP500C T/PUMP
SAFETY PRECAUTIONS
SAFETY
PRECAUTIONS
DANGER
• Risk of explosion. Do not use in the presence of flammable
anesthetics.
• Risk of electric shock. Disconnect power before servicing the
T/Pump.
• This device pumps warmed water through a pad. Set pad tem-
perature only as prescribed by and under the guidance of a
physician. Monitor the patient's temperature and skin condition
every 20 minutes or as directed by a physician. Failure to
adhere to these warnings could result in patient injury.
The following Groups/Conditions require additional surveillance:
Group/Condition at risk Potential injury
Pediatric patients Hyperthermia/
hypothermia
Patients with impaired circulation Ischemia
Areas of application are under pressure Ischemia
In combination with topical solutions whose toxicity
may be affected by the application of heat
In combination with other heat sources Thermal injury
Chemical
injury
www.gaymar.com P/N 10569-000 12/98
• Only qualified medical service personnel should repair the
T/Pump. Improper repair may result in death or serious
injury, equipment damage, or malfunction.
• Always perform the FUNCTIONAL CHECK AND SAFETY
INSPECTION as specified in the SERVICE MANUAL after making
repairs and before returning the T/Pump to patient use.
Improper repair may result in death or serious injury,
equipment damage, or malfunction.
1
INTRODUCTION
OPERATOR'S MANUAL
TP500/TP500C T/PUMP
Single pad Multiple pads
INTRODUCTION
(TP500 only)
Figure 1—T/Pump Heat Therapy System
Heat therapy is effective in the dilation of blood vessels, thereby increasing
the blood flow to the heated area. Heat therapy has a variety of uses, the
most common being treatment of aches and pains in joints and muscles.
The GAYMAR T/Pump® Heat Therapy System provides a means of
applying heat therapy by supplying temperature-controlled water through a
connector hose to a Gaymar T/Pad®. The hose is terminated in easy-to-use
Clik-Tite® or Colder-style connectors.
The T/Pad provides the interface for delivering the heat therapy. The
unique button design allows water to flow and provides trouble-free
operation when the pad is folded. This reduces the number of pads your
facility must keep in inventory. The pads are applied to the part of the
body requiring heat therapy, and the circulating water maintains the pad at
the set point temperature. The temperature set point is key-operated to
prevent tampering.
www.gaymar.com P/N 10569-000 12/98
The T/Pads can be interconnected (on model TP500 only) to provide
therapy to more than one body site at a time.
2