Gaymar Medi-Therm III MTA6900 User manual

Medi-Therm® III SERVICE MANUAL

NOTES:

1. REFERENCE: THIS DRAWING CORRELATES TO DRAWING (E) 11040 REV A

2. ' *' NOT APPLICABLE TO MTA6901 UNIT.

3. CAUTION: THIS PRODUCT IS SUSCEPTIBLE TO DAMAGE FROM ELECTROSTATIC
DISCHARGE. ASSEMBLING, HANDLING AND PACKAGING OF THIS ASSEMBLY SHALL
BE ACCOMPLISHED ONLY WITH ADEQUATE GROUNDING PROVISIONS TO PREVENT
ELECTROSTATIC DISCHARGE DAMAGE.

Figure 18—System wiring diagram

81

Medi-Therm® III SERVICE MANUAL

P8

POWER

INLET

NOTES:

1. ALL RESISTANCES ARE IN OHMS.

2. ALL RESISTORS ARE 1/4 W AND 5% TOLERANCE UNLESS NOTED.

3. ALL CAPACITORS ARE IN MICROFARADS UNLESS NOTED.

4. DENOTES DIGITAL GROUND.

5. DENOTES ANALOG GROUND.

6. DENOTES CHASSIS GROUND.

7. REFERENCE: THIS DRAWING CORRELATES TO DRAWING (D) 10830
REVISION: D.

8. CAUTION: THIS PRODUCT IS SUSCEPTIBLE TO DAMAGE FROM
ELECTROSTATIC DISCHARGE. HANDLING OF THIS PRODUCT SHALL BE
ACCOMPLISHED ONLY WITH ADEQUATE PROVISION TO PREVENT

ATTENTION

ELECTROSTATIC DISCHARGE DAMAGE.

Static-Sensitive
Devices

0096ATM1096ATM

SMHO92SMHO02

NOMINAL COLD RESISTANCE

FOR HEATER HR1

Figure 19—Power supply board schematic (sheet 1 of 3)

82

U31
27C512

Medi-Therm® III SERVICE MANUAL

* NOT USED MTA6901

Figure 20—Control/display board schematic (sheet 2 of 3)

83