GateWay Fax Systems Easy-Fax 90si User Manual

Easy-Fax 90si

Secure Facsimile Gateway

Reference Guide

Virginia, USA

Toll Free: 1-877-951-9800

Email: [e-mail]

http://www.gwfs.com

Revision 3.3

7 January 2005

GateWay

Fax

Systems, Inc.

www.

.com

GWFS

90si Reference Guide

GateWay Fax Systems, Inc., www.gwfs.com, 1-877-951-9800 page 2/13

CONTENTS

1.0 Configuring your STU-III for the 90si 3

1.1 AT&T Security Plus 3

1.2 AT&T, Lucent and General Dynamics 1100 (*1) 4

1.3 AT&T, Lucent, General Dynamics 1900 SDD (*1) 5

1.4 GE/RCA 2400 6

1.5 GE 9600 7

1.6 Motorola SECTEL 1000/1500 8

1.7 Motorola SECTEL MMT 1500 9

1.8 L-3 Communications STE 10

2.0 90si Status LED's 11

2.1 Power-up 11

2.2 Communications Errors 11

2.3 System Errors 11

2.4 Contact GFS Customer Service 11

3.0 Glossary of Secure Facsimile Terms 12

*1. GateWay Fax Systems, Inc. would like to gratefully acknowledge the contribution of ETR Technical
Services (336-698-9358) for providing the MODEM configuration procedure for the ATT 1100. And 1910

90si Reference Guide

GateWay Fax Systems, Inc., www.gwfs.com, 1-877-951-9800 page 3/13

1.0 Configuring your STU-III for the 90si

The most common cause of 90si operational problems are attributed to not having the STU-III's
Secure Data port configured for "Synchronous" operation. The following sections provide step­by-step instructions for configuring various secure telephones for "Synchronous" operation as
well as setting "speed" and "duplex" to provide optimum performance with the 90si. The "Press"
column indicates which button on the secure telephone should be pressed. The "Display" column
indicates what the responding display will show. The first line indicates the state of the secure
telephone before proceeding.

1.1 AT&T Security Plus

Objective: To set Secure Data Mode for 4.8 Kbps, Full Duplex, Synchronous.
While On or Off-Hook:

Press

Display
Program

Program Mode
3, 6, #

Operation Complete (Sets Synchronous)
3, 4, #

Operation Complete (Sets 4.8 Kbps, Full Duplex)
3, 0, #

SD:48 FDX SYNC (Displays new configuration)
Program

(Standby display)

90si Reference Guide

GateWay Fax Systems, Inc., www.gwfs.com, 1-877-951-9800 page 4/13

1.2 AT&T, Lucent and General Dynamics 1100

Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous.
While On or Off-Hook:

Press

Display
MENU

MAIN MENU / Secure Voice
NEXT

MAIN MENU / Secure Data
SELECT

Ex. SD:9.6 FDX, ASYNC / 2.4 Full Duplex
NEXT (until...)

9.6 Full Duplex
SELECT

Async
NEXT

Sync
SELECT

SD:9.6 FDX, SYNC / previous menu
MENU

(standby display)

Objective: To set MODEM; OUTPUT to -6 dBm and CONFIG to TRELLIS (*1)
While On Hook and with Master CIK inserted:

Press

Display
MENU

MAIN MENU / Secure Voice
NEXT (until…)

MAIN MENU / Change Config
SELECT

CHANGE CONFIG / Security Config
NEXT (until...)

CHANGE CONFIG / Network Config
SELECT

NETWORK CONFIG / Common Rining
NEXT

NETWORK CONFIG / Modem Output
SELECT

MODEM OUTPUT / Output = -10dBm
SELECT

OUTPUT / increment level
SELECT

OUTPUT = -9dBm / increment level
SELECT (3 times until…)

OUTPUT = -6dBm / increment level
NEXT (until…)

OUTPUT = -6dBm / save level
SELECT

OUTPUT = -6dBm / previous menu
SELECT

NETWORK CONFIG / modem output
NEXT (until…)

NETWORK CONFIG / previous menu
SELECT

CHANGE CONFIG / Network Config
NEXT

CHANGE CONFIG / Modem Config
SELECT

MODEM CONFIG / Trellis coding
SELECT

TRELLIS disabled / enable Trellis
SELECT

TRELLIS enabled / enable Trellis
MENU

(standby display)