
Microphone jack
FRONT BACK
LCD panel release latch
Headphone jack
Speaker
LEFT RIGHT
Kensington™ lock slot
S-Video out jack
Battery Indicator
Ventilation fan
Caution: Do not block
Power Indicator
DVD drive
Speaker
Power connector
IEEE 1394 port
PC Card slot
Memory card reader
USB ports
Modem jack
Monitor port
Ethernet jack
USB ports
1 INSTALL THE BATTERY.
With the label side down, slide the battery into the
battery compartment until it clicks. Then lock it in place.
3 CONNECT TO THE INTERNET. (optional)
Connect the phone cord (included) to the
modem jack ( ) if using dialup Internet access.
Or connect your Ethernet ( ) or USB ( ) cable
(not included) if using high-speed access.
2 CONNECT TO AC POWER.
Leave the AC adapter plugged in for at least three
hours the first time, so the battery will fully charge.
4 START THE NOTEBOOK.
Press the power button, then follow the on-screen instructions to
complete Windows setup.