Gatco 1565 User Manual
GENERAL INSTALLATION INSTRUCTION
C
OLDENBURG DECORATOR MIRROR
PREPARATION
Tools Required for Assembly: (not included)
• Pencil
• Electrical drill with 5/16 in. drill bit
Caution: Molly bolts are for dry walls only. Use tile anchors for tile surfaces. (not included)
Caution: Two people are required to safely install this oval mirror. The mirror will break if dropped. Take extra precautionary
measures to ensure a secure grip on the parts.
INSTALLATION INSTRUCTION
• Philips head screwdriver
• Tape measure
• Level
• Safety glasses
• Hammer
1. Mark the positioning of the
mirror, its three mounting
studs and their screw holes
with a pencil. Use a measuring
tape and a level for accuracy.
(Fig. 1)
2. Drill 5/16 in. pilot holes
into the wall where the Molly
bolts will be inserted using an
electrical drill.
3. Tap Molly bolts (A) into the pilot holes using a hammer.
4. Use an electrical
screwdriver to tighten the
screws. This will collapse the
Molly bolts (A) tightly to the
wall. (Fig. 2)
Fig. 2
Side View
5. Unscrew the screws (a)
from the Molly bolts (A).
Molly bolts will remain in the
a
wall. (Fig. 3)
Fig. 1
A
A
8. Tighten their set screw (D)
with Allen wrench (E). Make
sure that the opening of the
groove is facing up. (Fig. 6)
9. Rest the mirror (F) on the
lower mirror brackets (C).
(Fig. 7)
10. Position the upper
bracket (C) on the top edge of
the mirror. Align the respective
bracket (C) over the stud (B).
(Fig. 8)
Fig. 6
F
Fig. 7
D
C
E
Fig. 3
Side View
Fig. 8
6. Place the studs (B) over the
Molly bolts. Insert the screws
(a) back through the bracket
and the Molly bolts, and then
tighten firmly with Philips
head screwdriver. (Fig. 4)
7. Secure the two lower mirror
brackets (C) on the respective
studs (B).
Fig. 4
Fig. 5
B
Side View
B
11. Tighten the set screw (D)
with Allen wrench (E). (Fig. 9)
12. Tighten the set screw (G) in
each of the three mirror brackets
C
with Philips head screwdriver.
Tighten until just snug – do not
over tighten. (Fig. 10)
Side View
D
Side View
G
CARE AND MAINTENANCE
To maintain the beautiful luster finish, please use soft damp cloths when cleaning and never use any cleaning solvents.
E
Loading...