Page 1
Speedee-Serv® Speedlines
Refrigerated Mobile Salad Bar Cabinet SB63DI
G.A. SYSTEMS, Inc.
Length Width Height Weight
63” 30 3/8” 34” 350 lbs.
Electrical Requirements
120Volt/60 Hz./Single Phase 15 Amp circuit required. Cabinet equipped with a 6’ cord
with Nema 5-15P plug, which requires a Nema 5-15R receptacle.
This cabinet is designed with a cold wall refrigeration system that safely serves and
displays refrigerated foods at required temperatures. Cold wall refrigeration system with
pour urethane foam insulation. Temperature is thermostatically controlled to adjust to
desired temperature. This cabinet is available in all high pressure laminate or stainless
steel is available.
G.A. Systems, Inc. • 17872 Gothard Street • Huntington Beach, CA 92647
www.gasystemsmfg.com
ANSI/NSF7
Page 2
Speedee-Serv® Speedlines
ACCESSORIES
Refrigerated Mobile Salad Bar Cabinet SB63DI
Adapter AD2 and Crock Insert
CR8
Pan Adapters hold two standard
steam table pans. Crock Insert
accommodates eight crocks.
Adapters and Inserts are
fabricated of 18 gauge stainless
steel.
A custom variation of adapters are
available.
Adapter AD2 Pan Double Well
Holds two standard size steam
table pan. Pan Adapters are
fabricated of 18 gauge stainless
steel, two required per cabinet.
TRS63 Tray Slide
Fold down and removable lift
off design. Tray slide can be
mounted to one or both sides
with two heavy duty brackets.
Fabricated of 18 gauge stainless
steel. Also available in tubular
design.
DSN63 Double Sided
Sneeze Guard
Lift off removable with the use
of simple tools. Fabricated of 1”
square stainless steel tubing.
Top, sides, and ends are covered
with 1/4” thick polycarbonate
material.
www.gasystemsmfg.com
Page 3
Speedee-Serv® Speedlines
ACCESSORIES
Refrigerated Mobile Salad Bar Cabinet SB63DI
SN63 Single Sided
Sneeze Guard
Lift off removable with the use
of simple tools. Fabricated of 1”
square stainless steel tubing.
Top, front, and ends are covered
with 1/4” thick polycarbonate
material.
SN63SS SELF SERVE Single
Sided Sneeze Guard
Lift off removable with the use
of simple tools. Fabricated of 1”
square stainless steel tubing.
Top, front, and ends are covered
with 1/4” thick polycarbonate
material.
CS15 & CS20 Cash Shelf
Lift off removable design mounts
to either end of cabinet with two
heavy duty brackets. Fabricated
of 18 gauge stainless steel.
CS15 measures 15” x 30-3/8”
CS20 measures 20” x 30-3/8”
TS12 & TS15 Tray Shelf
Lift off removable design mounts
to either end of cabinet with two
heavy duty brackets. Fabricated
of 18 gauge stainless steel.
TS12 measures 12” x 29”
TS15 measures 15” x 29”
www.gasystemsmfg.com
Loading...