Ga Systems ESP36 Installation Manual

ESP36

"SPEEDEE-SERV" CORNER FILLER CABINET

OPERATION AND

MAINTENANCE MANUAL

Congratulations on the purchase of your new G.A. Corner Filler Cabinet. G.A. Systems would
like to thank you for purchasing this high quality piece of equipment. G.A. Systems has been
manufacturing this cabinet for over 30 years and is confident that you will be pleased with your
purchase for many years to come.

I. START UP AND INSTALLATION

The Model ESP36 Corner Filler Cabinet requires no outside power source or mechanical set up.
Simply roll cabinet into position. If the cabinet is used in conjunction with other "Speedee-Serv"
equipment, a connector is provided to hold each cabinet together.

II. SERVICE AND MAINTENANCE

Exterior and Interior Surfaces

Clean all surfaces with a lukewarm detergent solution, followed with a damp cloth and then wipe
dry. Caution: Never use Naphtha or solvent type cleaners, or harsh abrasive polishes on

plastic laminate surfaces. Never blow steam or dash excessively hot water against plastic
laminate surfaces.