Gas Doner Kebab Machine OT-25 User Manual

First of all, thank you for choosing our product. Good quality products and

Name

Gas Doner Kebab Machine

Model

OT-25

The Power

6kW(20700BTU)

Dimensions

295*265*480mm

excellent services are always provided by us at any time.
Our main products are: Electric Griddle Series, Electric Fryer, Gas Combination
Boiler, Hamburg Machine, Noodle Machine, Holding Cabinets, Fast Food
Equipment, etc. Our fashionable, energy saving and with advanced technology
products are supplying for a variety restaurants, bars and so on at home and
abroad

First, the technical parameters

Second, the use of notes:

Second, the Use of Notes:

1. The power supply voltage must be consistent with the unit.

2. The use of gas cans, pipe fittings, regulators must be safe and reliable, cannot

have leakage phenomenon. Do not put anything inflammable on the machine,
otherwise fire accident could happen.

3. Turn off the gas valve when cooking is finished.

4. The burner is strictly prohibited to be stroked and washed with water

5. When the machine is used, please do not leave the device at working alone for a

long period of time. For safety, the electric source and the gas source must be cut
off when you need to leave it alone.

6. Do not immerse the machine into water, otherwise the electrical performance is

easily to be affected. And can be led to electrical safety accidents and shortened
service life of the machine.

Third, Use:

1. Check if the power supply voltage is consistent with the product voltage, and

whether user's power switch and fuse are in conformity with the request of
machine's power.

2. Clean the machine before you grill.

3. 1) Open the gas valve. Turn on the switch from the off state, turn in

anti-clockwise direction slowly and stop until hear a sound of tick. 2) Lit the
burner (the board on both side) by using a point gun. 3) Insert the plug, Press the
Green Rotary Switch, then the indicator light lights on and the shaft begins to turn.
Use this way again until it is lighted as there still is air in the hose. It is the
greatest fire when the switch was turn on to 90°. The fire is lower when over 90°.

4. Place your meat on the pole for hanging meat according to your own preferences

and needs, and the meat can be piled up to 11.6 inch. The meat is grilled
uniformly and continuously when the pole rotates automatically. Wait a few
minutes and you will get the perfect meat. Take out the food and enjoy. The length
of grilling time affects food color and taste; please decide it according to different
texture of raw materials and personal preferences.

5. Turn off the flame: Close the switch in clockwise direction to the off-position and

the fire go out. Gas and electric source should be cut off and the machine should
be cleaned after cooking is finished. Using non-corrosive cleaning solution,
Non-water washing. Use warm suds; wipe the surface with a towel to clean.

Fourth, Installation Requirement:

1. The machine must be installed away from the wall at least 20CM. If the machine

needs to be against the wall, the wall must be fireproof and cannot combust.

2. The position of installment should be in ventilated area and exhaust fan should be

installed. Making sure the lampblack and the exhaust gas after burnt are vented
when the machine is working.

3. The machine should be horizontal placement, keep stable after it is installed and
do not be sloping. Do not shake it when it is working.

4. Do not use other incongruent gas for the machine as fuel gas and do not use high
pressure or medium-pressure valve (This machine only can use low pressure valve).

Fifth, Connection of the Gas

1. A Gas valve that can turn off gas rapidly must be installed before install this

machine. The gas valve must be placed upstream near the machine to be touched
easily.

2. Making sure the gas is the same kind of gas for the machine. If it is different,

Fault

Reason

Remedy

Power, pressing the
switch, the shaft does
not turn

1. Power is not
normal

2. no power,

3. fuse blown

Check the power
supply, replace the
fuse, so that normal
supply of electricity

Power, pressing the
switch, the shaft does
not turn

1. the motor switch
is damaged

2. the motor burned
out

3. sub off shaft
Shaw

1, replace the switch
2, replace the motor
3, re-well son Xiao

Open the gas valve,
burner, no ventilation

1. not liquefied gas
bottle

2. piping and nozzle
clogging

1. re-pot gas

2. pipes and nozzles
eliminate the
debris
management

Open the gas valve,
adjust the minimum bit

1. excessive wear of
the nozzle hole

1. replace the
nozzle

value lit burner, the
flames appear yellow
or larger fire

2. the regulator is
not a good tune

2. re-adjust the
valve

Product Name

User name or

address

Date of

Purchase

Distribution

units

(Seal)

Factory code

Product of "three guarantees":
Please consult after-sales department,
if malfunction cannot be removed by consumers
themselves. The warranty period is 6-month.

First, the user must fill out the warranty card after
purchasing, and must be validated by official stamp of the
dealer.

Second, All the damage caused by wiring that not meet the
specification of the manual, knocks during transport and
improper use, in the above-mentioned circumstance, part
can be replaced by our factory and only charge the fee of
part.

Third, to use the "three guarantees" service, please inform
us the product number and the damaged condition by
email or phone call,.

please don’t put through it. The gas hose should be painted on yellow.

3. Air tight test should be tested by using air or nitrogen before use the machine.

4. A regulator should be installed to make sure the rated pressure is met, if the

pressure inside the hose is higher or lower than 10% of the rated pressure as
requested.

5. After connected, test by suds or detecting instrument if there is any gas leakage of

the hose connection. (Note: Never use fire to test the gas of the hose! In order to
avoid danger!)

Sixth, the general failure of the inspection and

Warranty Card

exclusion