WWW.GARRITAN.COM
WIN
VST | AU | RTAS
MAC
|
A User’s Guide to
GARRITAN HARPS
Including the ARIA™ Player
Copyright © 2012 by MakeMusic Inc. All rights reserved.
This guide written by: Gary Garritan
Produced by: Gary Garritan
Programming: Chad Beckwith, Robert Davis
ARIA Engine Development: Plogue Art et Technologie, Inc.
Document Editing: Jonathan Tschiggfrie, Erin Vork
Art Direction and Graphics: Scott Menk
Project Management: Chris Anderson, Justin Phillips
Garritan Harps™ is a trademark of MakeMusic, Inc. Use of the Garritan Harps library and the
contents herein are subject to the terms and conditions of the license agreement distributed with
the library. You should carefully read the license agreement before using this product. The sounds
presented in Garritan Harps are protected by copyright and may not be distributed, whether
modified or unmodified. ARIA is a trademark of MakeMusic and Plogue Art et Technologie Inc.,
Finale® is a trademark of MakeMusic, Inc., EndlessWave™ is a trademark of Conexant, Inc., and any
other trademarks of third-party programs are trademarks of their respective owners. No part of
this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose,
without prior written permission MakeMusic, Inc. The information contained herein may change
without notice and does not represent a commitment on the part of MakeMusic, Inc.
GARRITAN HARPS
MakeMusic, Inc.
Eden Prairie, MN 553443848
Visit us online at: www.garritan.com
A USER’S GUIDE TO
GARRITAN HARPS
3
CONTENTS
Credits 2
Table of Contents 4
Welcome to Garritan Harps 6
Garritan Harps at a Glance 7
End User License Agreement 9
What the Garritan Harps Package Includes 11
Computer System Requirements 12
Regarding Sound Cards, Audio, and MIDI 14
Regarding Speakers, Amplification, and Headphones 15
Regarding 64-bit Computing 15
INSTALLATION & ACTIVATION 16
Installation 17
Activation 19
ARIA PLAYER BASICS 21
Navigating the ARIA Player Interface 22
Using the ARIA Player 24
ABOUT THE HARP 26
A Brief Overview of the Harp 27
Notating for Harp 34
A Brief History of the Harp 35
PLAYING GARRITAN HARPS 48
Loading Instruments 49
Making Sounds 51
Controls 55
MIDI Controller Quick Reference 59
Eects 60
4 User’s Guide to Garritan Harps
ENSEMBLE PRESETS 65
DIRECTORY OF HARP PATCHES 68
ADDENDUM 72
Getting Started 73
Getting Support 73
Updating Your Software 73
Acknowledgments 74
The Garritan Community 76
Additional Garritan Sound Libraries 77
User’s Guide to Garritan Harps 5
WELCOME
TO GARRITAN HARPS
The harp is known as the instrument of heaven and angels and deservedly so. It is as
perfect an instrument as there is on this earth. It is one of the oldest instruments dating
back to antiquity.
The harp holds a special place in my heart. From early childhood I wanted to play the
harp after seeing Harpo Marx play in a movie. When a harp teacher moved to the area,
I had the opportunity to begin lessons and thus my love aair with the instrument grew
every day.
It was while developing an electronic MIDI harp that I first became acquainted
with the world of sampling. In need of quality harp samples for my performing, I
developed the GigaHarp, one of the very first independent and detailed libraries for the
then-groundbreaking Gigasampler. The ability of Gigasampler to stream gigabytes of
samples and play multiple dynamic levels in real time was a revolution. Nothing like
it had been done before. The GigaHarp set the standard for quality, expression, and
performance—not only for harps, but for all other sample libraries. The GigaHarp was an
unqualified success and thus began my start as a sample developer. So the harp has been
with me all along in my musical journey.
Why has the harp lasted for thousands of years? There is something about the sound
of the harp that relaxes people. The soothing sounds of the harp have calmed the most
agitated spirits from the days of old. The harp has also been acknowledged as a healing
instrument by many cultures throughout history and there is now research that proves
its healing eects. Patients undergoing harp therapy attest to increased relaxation, better
sleep, decreased pain and anxiety, and mood improvement. No other instrument makes a
positive impact quite like the harp. Harps are also beautiful to look at and evoke a sense
of awe and enchantment even when not being played.
Fast forward to today: much has happened with music technology since the original
GigaHarp. We can do so much more now. Because the harp is my favorite instrument, I
had wanted to revisit and improve upon a harp library with the latest technologies. And
since developing the GigaHarp we have acquired the entire Gigasampler/GigaStudio
technology.
Yours in music,
6 User’s Guide to Garritan Harps
GARRITAN HARPS AT A GLANCE
Thank you for choosing Garritan Harps. The following summary presents some of
the outstanding features of Garritan Harps:
First and foremost, the pure and pristine sound of the harp — The harp featured in
Garritan Harps is one of a kind and unique. Each string of two Salvi pedal harps was
recorded separately with a piezoelectric sensor (RMC Pickup Co.) on each string.
Each string was sampled for the entire life of its natural decay. The sound of each
string is sweet, pure, powerful, and dynamic, with minimum crosstalk. Likewise, every
individual strings was sampled on two Venus Concert Grand harps and a Lyon &
Healy harp. Each harp was sampled in a dierent recording space, oering a nice
variation in perspectives that oers the best of all worlds.
Full-Ranged Harp Articulations — There are traditional angelic-sounding harp plucks
(gentle, soft plucks, medium plucks, and loud plucks) as well as harmonics, Près de
la table (played near the soundboard), picked, dampened, and other types of playing
techniques.
Glisses, Glisses, and More Heavenly Glisses — Glissandi, or glisses, are the hallmark
sound of the harp. Glisses on a harp sound heavenly. Using the unique built-in
keymapping to emulate the pedals of a harp, you can easily play realistic harp
glissandi and arpeggios that can be customized to your music (rather than timestretching or pitch-shifting harp glissando samples). They are played in Garritan
Harps by running one’s fingers up and down the keyboard.
Easy to Play and Control — Create your heavenly harp music quickly and easily. Just
load your harp and play. With Garritan Harps’ standardized controls, you will become
familiar with the library quickly. Users can also choose and adjust the harps’ acoustic
environments.
Sample Player with Disc Streaming Included — The entire Garritan Harps collection is
integrated into the ARIA Player and works as a software musical instrument. There is
no need to purchase a separate sampler. Garritan Harps also features the Conexant®
EndlessWave™ technology for hard disc streaming of multiple harps and techniques.
User’s Guide to Garritan Harps 7
Universal Format — You can play great-sounding harp music as a standalone application,
as a plug-in with your sequencer, or directly from the score within your notation
program. Garritan Harps supports all popular plug-in formats (VST, Audio Units, and
Pro Tools RTAS) on both Mac and Windows.
Suited for Every Musician — This collection brings the glorious and soothing sounds of
the harp into your studio, place of worship, rehearsal room, or home at a fraction of the
cost and takes up far less room. Composers can use this collection for inspiration to
capture creative ideas and sketch harp arrangements quickly. Hobbyists can use it for
adding harp sounds to their tracks. Beginners, harp enthusiasts, and music students
can use it to learn and study harp music at home. The harps in this collection can also
be used to supplement Garritan Personal Orchestra and other sample libraries.
8 User’s Guide to Garritan Harps
END USER LICENSE AGREEMENT
Please read the terms of the following software licensing agreement before using this
software. By installing and loading these products on your computer you acknowledge
that you have read this license agreement, understand the agreement, and agree to its
terms and conditions. If you do not agree to these terms and conditions, do not install
or use the sounds contained herein. This is the complete agreement between you
and MakeMusic, Inc., that supersedes any other representations or prior agreements,
whether oral or in writing.
An important thing to understand is that YOU ARE OBTAINING A LICENSE FOR YOUR USE
ONLYTHE SOUNDS DO NOT BELONG TO YOU. The implications are described below.
The sounds, samples, and programming in Garritan Harps™ remain the sole property
of MakeMusic, Inc., and are licensed (not sold) to you. There will be no refunds once
installed and registered.
WHAT YOU MAY DO: You may use these sounds in recordings, music productions,
public performances, and for other reasonable musical purposes within musical
compositions. You may use these sounds in your own musical compositions as much
as you like without any further payment to MakeMusic, Inc., or need to obtain further
permission. If you do use these sounds, we ask that you include the following credits
referencing the sound library used in any written materials or credits accompanying
your music that utilizes material from Garritan Harps (CD booklet, film credits, etc.):
“Instrument samples used in this recording are from Garritan Harps”—or a similar credit
where practicable. You are allowed a maximum of four (4) installations per purchase.
WHAT YOU MAY NOT DO: The enclosed sounds may not be re-used in any commercial
sample library or competitive product. You are absolutely forbidden to duplicate, copy,
distribute, transfer, upload, download, trade, or loan this software or any of the contents
in any way to anyone. You may not redistribute this product in whole or in part through
an archive, collection, through the Internet, or a binaries group, newsgroup, or any
type of removable media, or through a network. You may not resell the product without
written permission and payment of an additional fee. The sounds and samples contained
within this software may not be edited, modified, digitally altered, re-synthesized, or
manipulated without direct written consent from MakeMusic, Inc.
DISCLAIMERS AND CONDITIONS: The right to use Garritan Harps is granted to the
original end-user only, and this license is not transferable unless there is written consent
from MakeMusic, Inc. and payment of an additional fee. The sounds from Garritan Harps
will only work with the bundled Garritan ARIA Player and will not work with any other
sampler. Licensor will not be responsible if the content of this product does not fit the
particular purpose of the Licensee. Please make sure before installing this item that it
meets your needs, as there are no refunds. Information contained herein is subject to
change without notice and does not represent a commitment on the part of MakeMusic,
Inc. The sounds are licensed “as is” without warranties of any kind. Neither MakeMusic,
Inc., nor any agent or distributor, can be held responsible for any direct or indirect or
consequential loss arising from the use of this product in whatever form. The ARIA
Player is covered by the installer’s End User License Agreement and is incorporated by
reference. The terms of this license shall be construed in accordance with the laws of
the United States of America and the State of Minnesota. The user agrees to read the
manual before seeking technical support and to make sure his or her system meets or
exceeds the recommended requirements. Garritan Harps may not be returned for any
reason other than manufacturing defects.
User’s Guide to Garritan Harps 9
“The harp is to music …
what music is to life.”
—Carlos Salzedo (1885-1961)
10 User’s Guide to Garritan Harps
WHAT THE GARRITAN HARPS PACKAGE INCLUDES
This Garritan Harps library includes the following:
The “Garritan ARIA Player” installer file that contains the ARIA Player
software and the ARIA User’s Manual in PDF form.
The “Garritan Harps” installer file that contains the Garritan Harps sample
library and Garritan Harps User’s Guide in PDF form.
If you have not received an activation key card by e-mail, a unique serial number
is provided so that you can register the product and receive a key card. Don’t
lose this—store it in a safe place! You may have received this serial number
through a reseller if you purchased a download version from them.
N:
Make sure to get the latest ARIA Player update. Periodic updates are always being made.
Log in to your account at www.garritan.com/support to get the very latest.
Before you begin the installation, make sure you have read the End User License
Agreement on page 9. By installing the software, you are indicating that you
agree to the terms of the license.
“GLISS OVER” THIS MANUAL
The goal of this manual is to help you learn how to use the instruments of
Garritan Harps and how to use the controls to play the instruments. Although
many dislike reading manuals, if you wish to get the most out of this new library
it is essential to read this manual. Doing so will help you understand how to
use this software library. The operation of many of the essential features is not
immediately obvious and we realize that many users are not music technologists.
The ARIA Player has a separate manual that can be found in the same directory
as this file. Please refer to the separate ARIA Player User’s Guide for information
about registering, activating, and using ARIA. The ARIA User’s Guide is an
important part of the documentation.
We’ll do our best to make it easy for you to use this manual and to provide
information about the various harps and modes of control. And, of course, by no
User’s Guide to Garritan Harps 11
means can harp performance and technique be taught from this or any other
manual. Individual study and research will enhance your ability to use this library.
This manual is provided in digital form as an Adobe Acrobat document file (also
known as a PDF) that can be viewed on a computer display or tablet computer,
or it can be printed. If you do not have the Adobe Acrobat Reader, it is available
free from www.adobe.com. A digital manual is eco-friendly and can be easily
updated. If you need to have a paper copy, you can print this document or order
one at www.lulu.com.
The easiest way to obtain the information you seek is to use Adobe Acrobat’s
Bookmarks pane along the left side of this PDF document. If the Bookmarks pane
isn’t open, click the button to open it. Bookmarks allow you to quickly access
the various topics from the section names. With a PDF document, you can also
zoom in to make the page larger to see more details or zoom out to see multiple
pages at once. On any page, click the footer text “User’s Guide to Garritan Harps”
to return to the Table of Contents on page 4.
COMPUTER SYSTEM REQUIREMENTS
The following table lists the computer and hardware requirements for using
Garritan Harps. You can use the ARIA Player on most any modern personal
computer that meets the specifications listed below. The specifications provide
the minimum standards.
If you are using Garritan Harps within a host music program (such as a notation
program, DAW, and/or sequencing program), there may be additional resource
requirements. Please also observe the system requirements of your host
application, if applicable. The demands of any additional processing software
(including the sequencer, audio and effects processors, other plug-ins, and so
on) can affect functionality.
12 User’s Guide to Garritan Harps
COMPUTER SYSTEM REQUIREMENTS
Computer Operating System Hardware
Windows PCMicrosoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
(SP3 required)
Mac Mac OS X 10.6 minimum Mac Intel CPU (PowerPC not supported).
Core 2 Duo CPU or later recommended.
2 GB RAM recommended. There is a direct correlation
between the amount of available RAM and the number
of sounds that can be loaded.
4 GB of free hard drive space.
Hard drive speed of at least 7200 RPM recommended.
Internet connection for updates and online registration.
Monitor with 1024x768 resolution or higher.
A professional sound card compatible with ASIO.
A MIDI interface may be required if you are using a MIDI
keyboard. Many keyboards now use USB.
The ability to assign controllers within your keyboard,
music program, or sequencer is recommended.
High-quality speakers and amplifier, or high-quality
headphones.
2 GB RAM recommended. There is a direct correlation
between the amount of available RAM and the number
of sounds that can be loaded.
4 GB of free hard drive space.
Hard drive speed of at least 7200 RPM recommended.
Internet connection for updates and online registration.
Monitor with 1024x768 resolution or higher.
A professional sound card compatible with Core Audio.
A MIDI interface may be required if you are using a MIDI
keyboard. Many keyboards now use USB.
The ability to assign controllers within your keyboard,
music program, or sequencer is recommended.
High-quality speakers and amplifier, or high-quality
headphones.
User’s Guide to Garritan Harps 13
REGARDING SOUND CARDS, AUDIO & MIDI INTERFACES
The quality of your audio interface will have a significant effect on the quality of
the sound you will hear from Garritan Harps. It will also have a substantial effect
on performance (both latency and polyphony). Therefore, a good sound card is
one of the most important components in optimizing the sound and performance
of Garritan Harps.
In theory, any audio or sound interface that the manufacturer supports for
your operating system and computer, and that has good drivers, should
work. However, you are unlikely to get the best results from a sound card
designed for computer games or system sounds. Most computers come with a
consumer-grade sound card; we recommend that you get a good quality sound
interface beyond the one built into your computer. Older sound cards that do
not support multiple sample rates, as well as gamer-oriented or home system
sound cards, may be problematic. It is not possible for us to test all built-in
or third-party sound cards, and some interfaces do have problems on certain
platforms, so please see the specifications page on the Garritan website if you
are considering buying a new sound card to run Garritan Harps.
A low-latency audio interface with WDMWaveRT drivers (Windows), Core Audio
drivers (Mac), or ASIO drivers is required for Garritan Harps to work as a
standalone program. These drivers are normally installed with the audio interface;
the most recent version can be acquired from the manufacturer’s website.
Contact the manufacturer of your interface for more information.
Any MIDI interface the manufacturer supports for your system should also work
with Garritan Harps. There are a few dedicated harp MIDI controller setups on the
market. They are expensive and require proficiency in playing the harp, but may
be worth exploring.
N:
When Garritan Harps is running as a plug-in, it uses the audio driver specified in the setup
of the host program. If the host (typically your sequencer or notation program) is set up
properly and works well, then the ARIA Player plug-in should pass through the same audio
and MIDI setup. For more information, please refer to the manual for your sequencer or
notation program.
14 User’s Guide to Garritan Harps
REGARDING SPEAKERS, AMPLIFICATION, AND HEADPHONES
The combined quality of your audio amplifier and speakers is extremely
important; there is little point in expending a great deal on a high-end computer
system and audio interface but using inferior personal computer speakers. Good
quality speakers or headphones are important for faithfully reproducing the
sound of a virtual harp. The pedal harp has a wide dynamic rage, and can span
up to six and a half octaves.
REGARDING 64-BIT COMPUTING
As more hosts, operating systems, and hardware become 64-bit enabled, it is
important to know if the software you use provides 64-bit support. Garritan Harps
and the Garritan ARIA Player are 64-bit compatible and take full advantage of 64bit operating systems, processors, and hardware that are available. They are also
fully 32-bit compatible. To operate as a true 64-bit application, the entire audio
path must be 64-bit, including sampler, host, operating system, audio, and MIDI
hardware.
User’s Guide to Garritan Harps 15
INSTALLATION AND ACTIVATION
16
INSTALLATION
Below is a quick reference for installing Garritan Harps. For a complete guide to
installing the ARIA Player, please refer to the separate ARIA User’s Guide included
with Garritan Harps.
Installing Garritan Harps is a three-part process:
3 STEPS FOR INSTALLING
GARRITAN HARPS:
Step 1. ARIA Installation
Step 2. Sample Library Installation
Step 3. Activation
Installing the ARIA Player and the sample library are separate processes. ARIA is
installed first, followed by the Garritan Harps library.
Windows Setup: To begin, extract the contents of the downloaded zip file to a
folder of your choosing. It is critical that you extract the entire zip file before
running the installer. Once the contents have been extracted, double-click on
the installer and follow the on-screen prompts. If you have the DVD version,
just double-click on the installer.
Mac Setup: To begin, extract the contents of the downloaded zip file. Double-
click on the mpkg installer and follow the on-screen prompts. If you have the
DVD version, just double-click on the installer.
You will be given the option to install several components:
Standalone will install the Garritan ARIA Player as its own software program.
You can play instruments, record basic MIDI, and render audio files.
VST Plug-in will install the Garritan ARIA Player as a VST plug-in for use in
sequencers such as Cubase, Sonar, and Reaper, as well as notation programs
such as Finale.
AU Plug-in (Mac only) will install the Garritan ARIA Player as an Audio Units
plug-in for use in sequencers such as Logic and Digital Performer, as well as
notation programs such as Finale.
RTAS Plug-in will install the Garritan ARIA Player as an RTAS plug-in for use in
Pro Tools MPowered, LE, and HD.
User’s Guide to Garritan Harps 17
Once you have selected your installation options, you can specify which parts of
the sample library you want installed. We recommend you install the entire library.
At this point, you can sit back and let the installer do the work. If you have the
download version, you can delete the extraction folder once Garritan Harps
is successfully installed. Before doing so, however, we suggest you make a
backup copy of the installation zip file and put it in a safe place. If anything
happens to your computer, you can reinstall Garritan Harps from the discs
or the backup file, or you can download the installer from your account at
www.garritan.com/support.
I:
Do not cancel setup after installation begins: an incomplete, non-functional installation
may result.
18 User’s Guide to Garritan Harps
ACTIVATION
After the sample library has been installed, it must be activated. You have 30
days from the time you install the library before activation is required. Garritan
Harps features an innovative drag and drop authorization system.
Click Generate Key Cards and login to your account. If you don’t already have an
account, create a new account to be able to generate your key card.
Log in with your e-mail address and password. Enter your serial number, which
you can find on the inside of the DVD case that contained your installation disc.
User’s Guide to Garritan Harps 19
On the following screen, right-click (Windows) or CONTROL+click (Mac) on the
key card and choose Save As.
Save the key card PNG to your desktop. Launch the ARIA Player in standalone
mode. Click and drag the key card PNG icon from the desktop onto the ARIA
Player screen. A message will appear indicating that Garritan Harps has been
activated.
You can transfer your key card PNG image file to a flash drive if your music
computer does not have Internet access. You can download your key card at any
time by logging in at www.garritan.com/support.
I:
The key card contains your personal information. Don’t lose this—we recommend saving
your personalized key card to a safe place for future installations.
20 User’s Guide to Garritan Harps
ARIA PLAYER BASICS
21
NAVIGATING THE ARIA PLAYER INTERFACE
1. The active instrument light shows you which instrument’s parameters you
are changing. Click this location on another instrument slot to change the
focus of the controls.
2. The instrument display features a drop-down menu for loading instruments
which appears when the field is clicked.
3. Tuning controls let you control fine tuning.
4. Stereo output assignment allows you to route instrument slots to as many
as 16 unique stereo output channels when ARIA runs as a plug-in.
5. MIDI channel assignment allows you to specify the MIDI input channel for
the instrument slot.
6. Per-instrument sends let you apply the desired amount of reverb to each
instrument slot.
7. Mute and Solo buttons let you mute or solo the individual channels so you
hear only certain parts in a mix.
22 User’s Guide to Garritan Harps
8. Graphical faders give you a quick idea of an instrument’s presence in the
mix. The faders respond to CC#7 commands.
9. Keyswitch window displays the active keyswitch (if keyswitches are
available in the loaded instrument).
10. A keyboard shows the range of notes that can be played on that harp
instrument in white, keyswitches in pink, and the selected keyswitch in
beige.
11. Window tabs switch the display to the Info, Controls, Mixer, Effects, or
Settings window.
12. Ensemble presets allow you to quickly load instrument groups and
combinations. Please refer to the section on Ensemble Presets later in this
manual for a list of presets.
S A:
For more information about the features of the ARIA Player, please refer to the ARIA User’s
Manual.
User’s Guide to Garritan Harps 23
USING THE ARIA PLAYER
Once installed and activated, you can load the instruments of Garritan Harps
in the ARIA Player. There are several ways to use Garritan Harps with the ARIA
Player: you can play it “live” as a standalone application or as a plug-in within a
sequencer or notation program.
USING ARIA AS A STANDALONE
If you have installed the standalone version of the ARIA Player, you can find it
in your Applications folder (Mac) or Start menu (Windows). ARIA will attempt to
determine the best audio playback configuration to use on your machine. You can
access ARIA’s playback system by choosing Preferences on the Tools menu.
To use a MIDI keyboard with Garritan Harps, make sure to have the device drivers
installed and the unit turned on before starting the ARIA Player Standalone.
Your MIDI control device should appear in the MIDI Input Devices menu of the
Preferences dialog.
The Ensemble Presets allow you to use preconfigured or user-created templates,
saving a significant amount of setup time. You can also load instruments in each
slot and click File > Save to save the custom preset. Clicking File > Save As
Default saves all settings and instruments that are currently chosen so that they
automatically load each time you start the program.
The standalone ARIA Player also features a MIDI and audio recording system
located on the bottom of the screen. With these controls, you can load existing
MIDI files for the ARIA Player to play back using Garritan samples. You can also
record yourself playing live.
USING ARIA AS A VST, AU, OR RTAS PLUG-IN
Depending on your system and the options you selected at installation, you may
have one or more of these plug-in formats available.
Configuring VST
At installation you will be prompted for the vstplugins folder directory. The
installer will attempt to locate an existing vstplugins folder, or you can specify
your own. You can always find the ARIA Player VST plug-in in the Garritan/ARIA
Player/VST directory. The VST plug-in ends in a .dll extension. In your host’s
24 User’s Guide to Garritan Harps
VST plug-in configuration menu, ensure that the installation directory that you
specified is included in the list of VST directories. You may need to re-scan
the folders to have ARIA Player VST appear in the list of software instruments.
From there, just load the ARIA Player and go! You will find the VST listed as
ARIA Player VST.dll, which contains a single stereo output, and ARIA Player
Multi VST.dll, which allows you to assign up to 16 stereo outputs. On 64-bit
Windows systems, both 32-bit (“x86”) and 64-bit (“x64”) versions of the VST
plug-in will be installed.
I N PC U:
To use the ARIA Player with more than one VST host program, you need to manually copy
the ARIA Player VST_x86.dll, installed into the chosen folder during installation of the
library, to the appropriate host program’s VST folder. Please refer to your particular host
program’s user’s guide and the Garritan support site for more information.
Regarding 64-bit hosts: Some hosts have one common VST folder for both 64-bit and
32-bit plug-ins; please only use the version of the plug-in that is native to your host. Mac
OS X has standard folders for both VST and Audio Units plug-ins and does not require this
extra step.
Configuring AU (Audio Units—Mac Only)
The ARIA Player will install into the default Mac OS X AU plug-ins folder, after
which it will be readily available to your host programs.
Configuring RTAS (Pro Tools systems only)
The ARIA Player will automatically install the RTAS plug-in to its proper
location to work with Pro Tools.
S A:
For more information about using the ARIA Player, please refer to the ARIA User’s Manual.
User’s Guide to Garritan Harps 25
ABOUT THE HARP
26
A BRIEF OVERVIEW OF THE HARP
Harps are one of the oldest and most recognized instruments. The harp is a
multi-stringed instrument that is typically played by plucking with the thumb and
fingers.
There is no such thing as a “standard” harp and they come in many sizes and
varieties. The most common types of harps are the concert pedal harp and nonpedal harps. The concert pedal harp is the type of harp many people are most
familiar with, as it is often seen in a symphony orchestra.
Non-pedal harps include many types of folk harps, Celtic and Irish harps, lap
harps, Latin harps, and various ethnic harps. Students often begin by learning the
non-pedal harp before moving on to a pedal harp.
A person that plays a concert pedal harp is called a harpist and a person that
plays a folk harp is called a harper.
HARP STRINGS AND RANGE
Many are familiar with the gentle sounds of the harp. Harp strings are usually
plucked with the tips of fingers of both hands. Some traditions (such as South
American harpers and wire-strung harpers) play with their fingernails. Once
plucked, the sound of the string will slowly die away. The player can shorten this
decay by dampening immediately after plucking the string.
Only four fingers of each hand are used to play the harp. The little finger is rarely
used because it is considered too short and weak to effectively pluck the strings.
The three main types of harp strings are gut, nylon, and wire. Concert pedal
harps usually use gut strings, which have high tension but a relatively short life
span. They are rather expensive and some harpists are opting for carbon fiber or
synthetic gut strings. Nylon and composites are used in many non-pedal harps
and the tension is usually lower. Wire-strung harps have a different sound and are
normally only found on historic folk harps.
Concert harps and most folk harps have several different colors of strings: red,
dark blue and clear. The “C” notes are usually red, the “F” notes are dark blue,
and the remaining strings are clear. The color coding is handy for the harpist to
locate strings at a glance.
User’s Guide to Garritan Harps 27
Concert pedal harps typically have 47 strings, or six-and-one-half octaves,
nearly the range of the piano. The lowest string is a C, just three notes above
the piano’s lowest A. The highest string is a G, just four notes below the piano’s
highest C. The average concert pedal harp has a height of approximately six feet
and can weigh as much as 90 pounds; the pressure exerted by the strings on
the soundboard of a concert pedal harp can be as much as 4,400 pounds. The
following is the typical range of a Concert Pedal Harp:
Non-pedal folk harps usually range from 20 to 40 strings and employ sharping
levers rather than pedals. The range of a folk harp varies according to type and
size. They are often tuned to a specific key.
28 User’s Guide to Garritan Harps
PARTS OF A HARP
The above illustration labels the parts of a pedal harp. The parts of a non-pedal
harp are similar except that sharping levers are used instead of pedals.
Crown - The crown is situated at the top of the harp and rests atop the pillar.
It is in the shape of a crown, hence its name.
Tuning Pins - The tuning pins are tapered metal pins that go through the
neck of the harp and fasten the strings to the instrument. The tuning pins are
turned to tighten or loosed the strings, adjusting their pitch.
Pillar - The pillar (or column) is the vertical part of a harp. The top of the
column is attached to the neck of the harp and the bottom of the column
attaches to the soundbox.
Neck - The neck (or harmonic curve) is the upper, curved part of the harp
connecting the column to the soundbox and securing the tuning pins.
Soundbox - The soundbox (or sound chamber) is the hollow part of the harp
attached to the pillar at its lowest point, and to the neck of the harp at its
highest point. There are sound holes in the back of the soundbox facing the
harpist. These sound holes help amplify the notes of the harp.
User’s Guide to Garritan Harps 29
Soundboard - The soundboard is the flat surface of the soundbox located on
the string-side of the harp. Soundboards require a high-quality wood such as
Sitka spruce, which expert luthiers believe provides the best tone to the harp.
Shoulder - This is the curved part of the harp that connects the neck to the
soundbox. The shoulder of the harp rests near the harpist’s right shoulder
with the right arm wrapping around the instrument.
Pedestal or Base - The base connects the column to the soundboard and is
where the harp pedal mechanism is situated.
Feet - The feet are located on the bottom of the base and enable the harp to
stand on its own.
Strings - The strings of the pedal harp are tuned similarly to the white keys
on a piano. The red strings are the “C” notes, the dark blue strings are the “F”
notes, and the clear strings are the remaining notes.
Pedals - The concert pedal harp has seven pedals. Three pedals are
controlled by the left foot and the remaining four are controlled by the right
foot. See the section below for a more detailed discussion of the harp pedals.
PEDALS
Harp pedals are much different than pedals on a piano or the pipe organ. The
concert pedal harp that one sees in an orchestra has seven pedals, not easily
visible unless one is close up to the instrument. It is fascinating to watch a
harpist’s feet dance over the pedals. Imagine playing with both hands and both
feet!
There are seven pedals corresponding to the seven notes of the scale - C, D, E,
F, G, A, and B. These pedals change all octaves of any given note simultaneously.
The pedals are mechanically attached to discs near the tops of the strings and
are used to change the length of the strings of every octave of each note.
Each pedal has three positions. The first notch (center) position corresponds to
natural notes, the second notch (bottom) to sharp, and the upper position to flat.
For example, by moving the C pedal to the second notch, the harpist switches
every C string to C#. The same applies to the other notes of the scale, making it
possible to play in all keys.
30 User’s Guide to Garritan Harps
Pedaling allows the harpist to change keys reasonably quickly, but composers
and arrangers should allow extra time for pedal changes before the new notes
are required, especially if there are several simultaneous pedal changes.
Harpists must remember to check the pedal positions before tuning, and then
tune the harp in the desired key.
LEVERS (FOLK HARPS)
Lever harps, or folk harps, are small to medium-sized harps with limited
chromatic capabilities. These harps have a manually controlled flip-up lever at the
top of each string that can raise the pitch of each string by one half-tone when
engaged (flat to natural or natural to sharp). The levers are attached to the neck
of the harp below the tuning pegs. The player’s left hand usually changes the
lever positions.
GLISSANDI (GLISSES)
The glissando (plural glissandi) is one of the most beautiful and characteristic
effects associated with the harp. It is played by rapidly drawing one or more
fingers across a succession of adjacent strings in an upward or downward
motion. They can be played with the right, left, or both hands, in either ascending,
descending, parallel, or contrary motion. To play glissandi on a pedal harp, a
harpist raises or lowers the required pedals to produce desired scales or chords.
Glissandi are usually played using single notes with one or both hands, but
multiple glisses are also possible with more than one finger. Glisses performed
on non-pedal harps are much more limited and sometimes require certain notes
be retuned or muffled.
User’s Guide to Garritan Harps 31
Glisses can be diatonic or enharmonic. A diatonic glissando is played using all
the notes of the scale of a given key. An enharmonic glissando is intended to
suggest a particular chord. With the use of the pedals, the harpist can double
certain notes and eliminate clashing notes in order to produce a compatible
chord for the glissando.
Garritan Harps has a variety of options for playing glisses. It is our hope this
library takes away some of the anxiety and makes harp glisses more accessible.
SPECIAL EFFECTS
Harmonics
Harmonics are produced by slightly stopping a string at its halfway point with
the flesh of the hand while plucking the string with the finger. The resulting
sound is ethereal and bell-like, sounding an octave higher than the written
string tone. Harmonics sound best when played in the middle register of the
instrument. Standard notation for harmonics places a small “o” above the
note.
Double and triple harmonics are possible but rare. Up to three harmonic notes
in close range are possible with the left hand and one harmonic note with the
right hand.
Près de la table
Près de la table is a special technique of playing near the soundboard (close
to the base of the strings rather than the normal playing in the middle of
the strings). Strings plucked near the soundboard produce sounds that are
brighter and more metallic.
Damping
Damping, also called muffling, is the stopping of the vibrating string with
the hand soon after it is plucked. When not specified, it is assumed that the
sound of the note played will fade away naturally. When there is a “+” under
the note, that indicates to play the note “étouffez” or slightly damped with the
thumb, so that each string is damped as the next string is played.
32 User’s Guide to Garritan Harps
Chords and Arpeggios
A chord is the sounding of more than one note simultaneously, similar to
playing a chord on a piano. An eight-note chord is the largest chord possible,
as a pedal harpist plays with only four fingers per hand. The range of the
chord is also limited to the span of the harpist’s hand, which typically ranges
from an octave to an octave and a fourth.
Arpeggios are chords where the notes are played in succession rather
than plucked simultaneously. Slight arpeggiation is the default method that
harpists use to play chords if there is no other indication. An arpeggio can be
played from bottom to top or top to bottom. Arpeggios played very fast while
alternating both hands sound terrific (e.g. the Nutcracker harp cadenza).
Trills, Tremolos, and Bisbigliando
The harp is capable of playing quickly-repeated notes including trills
(alternating multiple pitches), tremolos (rapidly repeating one pitch), and
bisbigliando. Trills and tremolos are typically notated in the same manner
as the piano. Tremolos are easier if enharmonics are used, alternating two
strings tuned to the same enharmonic pitch (e.g. G# and Ab).
Bisbigliando is a special tremolo effect on the harp where a chord or note
is rapidly repeated at a quiet volume to sound like whispering. To play
bisbigliando, the harpist usually plays with both hands very lightly.
These are some of the most common special effects for harps. There are
other effects that professional harpists also employ.
User’s Guide to Garritan Harps 33
NOTATING FOR HARP
Harp parts are notated on the grand staff, with the right hand playing in the
treble clef and the left hand playing in the bass clef, similar to a piano. Harpists
generally play with four fingers of each hand and the little finger is rarely used.
Therefore, a maximum of eight simultaneous notes are written for the harpist.
Harp music often indicates whether the right or left hand plays the notes. This is
noted as m.d. for the right hand and m.g. for the left hand.
To notate a glissando, the score will indicate the pitch of the starting and ending
notes, with a straight line between them with the word gliss(ando).
The harpist’s score typically indicates the initial pedal settings (for example, D C#
Bb E F# G Ab). A pedal diagram, which is a visual representation of the pedals, is
common in harp notation; an example is provided below.
A horizontal line represents the first position (natural) of the pedals and a large
vertical line represents the middle of the harp with the left foot pedals (D C B)
to the left of it and the right foot pedals (E F G A) on the right. Pitch changes are
usually notated a bar or two in advance to give the harpist time to make pedal
changes.
34 User’s Guide to Garritan Harps
A BRIEF HISTORY OF THE HARP
The history of the harp goes back thousands of years. The harp is the oldest
known stringed instrument. The piano, the guitar, the violin and all other string
instruments evolved from the harp. Throughout the ages, the harp has had an
impact on almost every culture. Harps have been regarded as sacred and have
been instrumental in the healing process, in the celebration of birth, as comfort
in passing, and to make people feel better. No other instrument has been so
closely associated with so many positive things: with a profound sense of beauty,
with peace and tranquility, with love, with enchantment, with goodness, and with
heaven.
The word harp comes from Anglo-Saxon, Old German, and Old Norse words
whose root means “to pluck”. Scholars disagree as to what exactly a harp is.
The names early musicians gave their instruments are not the names we give
those instruments today and the names of instruments in the ancient world were
interchanged. Harps in my definition are multi-stringed instruments with open
strings (no frets) plucked with the fingers where each string plays one note.
This would include medieval harps, baroque harps, Irish harps, Celtic harps,
Spanish harps, Chinese harps, African Harps, as well as related instruments
like lyres, zithers, clàrsach, kitharas, psalteries, arpas, yazh, cheng, kotos, koras,
and other stringed instruments. The evolution of the harp followed paths of
human migration and also coincided with the development of musical scales in
each culture. The harp’s development reflected physical, cultural and economic
environments such as trade, religion, environmental changes, and technology.
PREHISTORIC TIMES
No one really knows where the harp originated and we will never know what
music sounded like at the dawn of civilization. One of the earliest musical
instrument relics, discovered in France at the cave of the Trois-Frères on rock
paintings dating back to 15000 BCE, shows a harp-like instrument. Many believe
that the earliest harps were modeled after the hunter’s bow. Perhaps while
hunting, prehistoric humans liked the sound of the vibrating bowstring. Then a
second string was added to the bow, followed by a third. Over the course of time,
more and more strings were added. Eventually, a gourd or a hollow area at one
end of the bow was added, becoming a sound box. This came to be known as
the arched harp, which the Egyptians later perfected.
User’s Guide to Garritan Harps 35
ANCIENT EGYPT
Of all the musical instruments in ancient Egypt, hieroglyphics seem to show that
the harp was the most popular. Some of the earliest depictions of Egyptian harps
are from the tombs of the Pharaohs, dated to around 5,000 years ago. Music
played a great part in ancient Egyptian life. They regarded musical instruments
and music itself as originating from the gods. Harps were used in harp
ensembles, in festivities and banquets, in funerals and in temple worship. The
Egyptians played mostly arched harps - where the neck and body form a bowlike curve or “C”-shaped soundbox, forming the resonator of the instrument. The
harps were mostly played in a vertical position. The Egyptian Pharaoh Ramesses
III (11861155 BCE) had many harps depicted among paintings in his tomb. In the
New Kingdom, harps measuring up to 612 feet in height with 19 strings had to
be played standing up. Many illustrations show the hands are on different strings
with wide gaps between the hands.
MESOPOTAMIA
As in Egypt, harps were very popular in ancient Mesopotamia. One of the earliest
illustrations of a harp in Mesopotamia was on a vase found during an excavation
of a Babylonian temple near the Tigris and Euphrates Rivers. These harps were
arched harps with 12 to 15 strings, not unlike the instruments that were played
in Egypt at about the same time. Mesopotamian arched harps were played with
the soundbox held above the strings, whereas in Egypt the resonator was held
below. The Mesopotamians later developed other types of harps. The angle
harp differed from arched harps in that the neck and the body form right angles.
Vertical harps, also known as lyre harps (or just lyres), began appearing in
ancient Sumeria by 2800 BCE. A lyre usually had two arms of wood extending
out from the instrument’s body. The arms were connected at the top with a stick
or crossbar to which strings were wound. The strings were stretched from the
crossbar to the instrument’s body. In box lyres, the body and belly formed a
hollow wooden box; in bowl lyres, the body was made from a tortoise shell, gourd
or carved bowl, and the belly was usually an animal skin.
PALESTINE & BIBLICAL TIMES
Much of the imagery and concepts of harps we have come from the Bible.
The harp is the first instrument mentioned in the Bible. One of the earliest
archaeological finds including a harp was near Jerusalem. A cave drawing from
36 User’s Guide to Garritan Harps
the 3rd or 4th millennium BCE was discovered in Megiddo that depicts a man
playing a frame harp known as a nevel. Legend has it that the sound of the nevel
was so sweet that when all the other musical instruments heard it they became
ashamed. In the Bible, Jubal was “the ancestor of all who play the harp” (Genesis
4:21), and it is mentioned that King David was “skilled in playing the harp”, playing
it as a shepherd while sitting in the fields and composing his psalms. Although no
one knows exactly what David’s harp(s) looked like, the Bible does say that David
played very well and prevented King Saul from going mad: “… David would take
up his lyre and play. Then relief would come to Saul; he would feel better, and the
evil spirit would leave him” (Samuel 16:23). This seems to be the oldest recorded
case of harp therapy.
Harp lyres were used in the Temple of Jerusalem as a regular part of the worship
service. One depiction of a harp that existed close to the time of Jesus was
shown on a coin issued during the Bar Kochba revolt called a Zuz. On this coin
is shown a small harp called a kinnor, the kind that was probably used in the
Temple Service. Tradition has it that the Jews refused to play the harp when they
were exiled in Babylon. Instead the Harp of David was hung upon the willow trees.
The harp of the Temple was forever silenced and disappeared. Ancient Talmudic
prophesy (Mas. Arachin 13b) says that harps will usher in the coming of the
Messiah. “The harp of the ten strings is reserved for the day when the world that
is to come (the Olam Haba) is united in one harmonious whole.” In the last book
of the New Testament, Revelation 14:2 states “And I heard a voice from heaven,
as the voice of many waters, and as the voice of a great thunder: and I heard the
voice of harpers harping with their harps.”
ANCIENT GREECE
Some of the oldest carvings of harps were discovered in
Phoenicia. Eleven marble harp statuettes dating back to
between 3000 and 2300 BCE were found on the island of
Keros in the southern Aegean Sea. It was found at Keros and
dates from the Early Cycladic period (28002300 BCE).
These figurines are playing triangular-shaped harps. In the
5th to 6th centuries BCE, Pythagorus discovered numerical
ratios corresponding to intervals of the musical scale. Greeks
began to write songs based on these scales and the small
lyre harp was ideally suited to play songs in these scales.
The ancient Greeks valued the ideals of beauty and ethics
and music played an important part in Greek life. The Greeks considered the art
User’s Guide to Garritan Harps 37
of playing musical instruments to be a principal part of learning. The lyre harp
lent itself nicely to these Greek ideals and later became the most popular
instrument in Ancient Greece.
The classic Greek lyre harp was the kithara, which was a term used for
describing all kinds of harps and lyres. Our modern word guitar comes from
the word kithara. According to Greek mythology, Hermes created the lyre harp
from the body of a large tortoise shell, which he covered with animal hide, with
antelope horns forming the posts. So beautiful was the tone that he presented
the instrument as an offering to the god Apollo. The lyre harp was thus regarded
as the instrument of Apollo, the god of music and harmony. Lyres came to
be associated with the higher Apollonian virtues of wisdom, serenity, clarity,
moderation, and communication. In contrast, the music of the Dionysians was
performed on raucous reed instruments with wild abandon. Greek mythology
holds that Orpheus, the divine lyre harp player, in order to bring back his wife
from the dead, charmed Pluto, the lord of the underworld. Orpheus played
this lyre harp to inspire Jason and the Argonauts on their quest for the Golden
Fleece. It was Orpheus’ melodies that blocked out the brainwashing sirens, who
were intent on inciting listeners to their destruction. The Greeks are also credited
with inventing the Aeolian harp, a harp played by moving air. It was named for
Aeolus, the Greek god of the wind.
THE FALL OF THE ROMAN EMPIRE AND DARK AGES
When Greece was conquered by Rome in the second century BCE, there was an
influx of Greek art into the empire. Nevertheless, Ancient Rome did not seem to
place as high an importance on music as did the other ancient civilizations. For
the most part, only martial music was valued in Rome; the Romans possessed a
large number of military horn instruments and drums. Harps did not fit well with
the military state. The culture of brutality left little appreciation of the esoteric
tones of the harp. Music was regarded by the state as worthless or belonging to
commoners and not befitting to the education of its younger citizens. Needless
to say, music degraded over time, as did many other aspects of this society. With
the decline of the Roman Empire, music seemed to have died out, and there are
very few historical references for a number of centuries following. In European
society after the fall of Rome, depictions of harps were found on the coins of preChristian Gauls. These U-shaped instruments, may have come to western Europe
from southwestern Asia with groups of Indo-European peoples who spread
across Europe. The harp and culture in general seems to have disappeared in the
Dark Ages. These first few centuries CE are shrouded in mystery.
38 User’s Guide to Garritan Harps
ANCIENT ASIA
Meanwhile, further east in Asia, the development and
use of the harp flourished as the Chinese developed
elaborate instrumental orchestras that included harps.
Ancient Chinese writers speak of the number of strings
on musical instruments decreasing to help prevent
arousing the dangerous depths of the soul. In the
works of Confucius (551479 BCE) many instruments
are described, including harp-like instruments.
Confucianism spoke of music which “soothed the
savage breast”. Chinese harps were known to have existed in the Shang Dynasty
(16001046 BCE). In the Han Dynasty (206 BCE220 CE), the konghou frame harp
was believed to have been brought into China by Persian merchants via the Silk
Road. The konghou looks very much like some modern harps. Figures playing the
konghou harp in a musical ensemble, along with panpipes, drums and pipas (a
type of lute), are depicted in the lavish Dunhuang processional mural paintings.
The konghou harp was a popular instrument in the royal courts during the Sui
and Tang Dynasties and poems were written praising its beautiful color and tone.
A similar instrument called the kugo was introduced in Japan in the tenth century
CE. For some unknown reason, the konghou slid into obscurity during the Ming
Dynasty (13681644 CE), and Asian harps began to take on a different shape.
Horizontal harps (where the strings run parallel to the soundbox) began a long
tradition in East Asia. In China, the guzheng (pictured above left) became very
popular. In Japan, a similar instrument, the koto, became the most revered
musical instrument.
In India, the harp has had a colorful history. Music in India has always played a
significant role in the lives of its people. The history of the harp in India goes
back thousands of years. Harps that had hundreds of strings were known to
exist! There is an ancient Indian saying, “Listening to the playful melody of a harp
(yazh), puts one into a state of spiritual ecstasy that makes one forget the worldly
pains that one goes through”. Indian scholars believe that the hunter’s bow was
the first type of yazh harp. An ancient Sanskrit manuscript, the “Kannanar”, tells
a story of the hunter Vedan using the bent branch of a tree and vegetable fibers
for strings to make an instrument to accompany his song. Many ancient Sanskrit
texts provide many names given to harps, such as Adi yazh, a 1000-stringed
harp used for chasing away wild animals; Narada periyazh, a 1000-stringed yazh
in a triangle shape; Adi kala periyazh, a 100-stringed instrument; Periyazh, a 21
stringed instrument; Kichaka yazh, a 100-stringed yazh; and many others. The
whole universe, according to Hindu mythology, originated with the sound of
User’s Guide to Garritan Harps 39
the “Om”. Then seven notes were born from the five faces of Shiva. India later
developed more notes and the harps were built to accommodate these notes.
The Bharata Natyam, written in the second century BCE, described the octave
and divided it into 22 notes. This was discovered while playing the yazh harp and
developed the basis of the quarter tone scale which survives today. Instruments
like the sitar and tambura evolved from the yazh, becoming the popular stringed
instruments of India today. For some unknown reason, the yazh stringed
instruments became extinct. In Burma (Myanmar) a harp known as the saung
survives to the present day and has many similarities to the ancient Egyptian
harps.
MIDDLE AGES - MEDIEVAL HARPS
After centuries in obscurity, the harp reappeared in Western civilization. The
emergence of Christianity brought with it respect for the instruments of the
Bible, especially the harp. In the fourth century CE, monotone chanting was used
in worship services in the church; eventually, more notes were added, in time
evolving into Gregorian chant. The harp became a preferred accompaniment for
the monks’ voices. A Cambridge manuscript describes the harp as one of the
few permitted instruments in the early church, whereas the horn, drum and rattle
were regarded as the devil’s instruments. The fifth century brought forth the
King Arthur legends, in which the magician Merlin was believed to have played
the harp. Also during the fifth century, a Papal music school was established in
Ireland and the harp was taught.
Fragments of a six-stringed harp were found in the 7th-century Sutton Hoo burial
ship unearthed at Suffolk, England. The depiction of a harp was also discovered
in stone carvings dating from the 7th century CE in Hexam, Northumberland in
the British Isles. The earliest known mention of the word harpa occurred about
600 CE by Venantius Fortunatus, the Bishop of Poitiers. In northern Europe,
the Germanic tribes played a type of lyre harp. Mentioned in Beowulf, the harp
may have been the instrument to accompany the performance of Anglo-Saxon
poems and stories. The remains of several such Germanic harps, dating from the
fifth through the tenth century, have been found in Saxon and Frankish graves
in England and Germany. The earliest drawings of harps with columns appear
in the Utrecht Psalter, written and illustrated in the early ninth century. Many of
these illustrations show figures holding harps, and in six of them the column
or forepillar is clearly shown. The harp played by the harpers of the old Gaelic
order was an aristocratic instrument, played in the courts of kings and before the
chiefs of clans. It had an important role in legend and folklore.
40 User’s Guide to Garritan Harps
Beginning around the 13th century, when feudalism reached its height, the
troubadours began appearing. They would pluck their harps and sing their
graceful melodies and advance the cause of chivalry. European harpers earned
their living by moving from town to town, using small harps for self-accompanied
singing and storytelling, as well as in instrumental consorts. The harp had such
mystical significance that many kings or chieftains had harpers in their employ,
believing the instrument to possess magical powers. Harpers were second only
to the chieftain or king, often serving as advisors and leading armies into battle
in order to bring luck to the warriors, to hail the heroes, and to recount battles
to the tribes and clans. Unarmed, they were recognized and respected by the
enemy and were immune from harm. Richard the Lionhearted took his harper,
Blondel, on the Third Crusade in the 12th century. The age of chivalry with its
troubadours and minstrels began a new renaissance in harps. The medieval
harps during this time were small enough to be held on the player’s lap, and
had between 7 and 25 strings with narrow sound boxes. Medieval harps were
apparently wire strung, typically had outcurving forepillars, and eventually
were tuned diatonically (seven notes per octave). From the middle of the 14th
to the 16th century, larger harps known as Gothic harps appeared. This harp
had approximately 24 gut strings and was a tall instrument carved into pointed
corners, similar to a Gothic arch. This Gothic harp is the ancestor of the folk
harps of Latin America and of the modern Irish and orchestral harps.
HARPS IN IRISH SOCIETY
The harp has been an important emblem for Irish
nationalists since the 10th century CE. Although the Irish
are generally credited with bringing the harp to Europe,
scholars believe it was brought to Europe from Egypt. Irish
fables speak of the Dagda, a god who played the harp to
welcome springtime. The earliest images of an Irish harp
appear in metal and stone etchings made during the 11th
and 12th centuries. King Gruffydd ap Llywelyn of Wales
employed harpists in his court at the end of the 11th
century. By the end of the 12th century, manuscript
illustrations depict harps with more advanced designs. The
neck of the harp became curved so as to make the middle
strings a little shorter, a feature that gave the strings a
more uniform tension. It is reported by Giraldus Cambrensis that the Irish were by
then playing harps with brass or bronze strings.
User’s Guide to Garritan Harps 41
Records from the 15th century show that both the terms
harp and clàrsach were in use at about the same time
and seemed to have denoted a distinction between
the gut-strung European-style harp and the wirestrung Gaelic clàrsach. The earliest surviving harps
from Scotland and Ireland date to approximately the
15th century. The characteristic shape of an Irish harp
is familiar from Irish coins and bottles of Guinness
Beer. The Trinity College harp, one of Ireland’s national
treasures, is the harp from which the national symbol
of Ireland is copied. Henry VIII of England had the Irish
harp impressed on coins after obtaining control over Ireland.
For centuries, the harp was an integral part of Irish life. Traveling harpists in
Ireland were known to be at the focal point of rebellions—so much so that the
harp was banned from time to time. In the 1700s, some harp players wrote down
old folk tunes in music notation. Bunting’s history of the harp collected these
Irish compositions. Turlough O’Carolan (16701738), the blind Irish folk harpist,
wrote over 200 tunes, many of them still very popular today. The harp remains an
important and integral part of Irish culture.
THE CULTURES IN THE AMERICAS
Very little is known about the music of ancient American
cultures. There is scant evidence showing that multi-stringed
harps were ever made by the indigenous people of the
Americas. They are generally thought to have been introduced
during European conquests and colonization. The Jesuit
missionary and music teacher Anton von Sepp Rechegg wrote
in 1692: “The Indians built very good musical instruments,
among them trumpets, clarinets, harps… “ Harps are still built
and played by the Tzotzil, Mayo and Yaqui indigenous people of
Mexico, who developed the harp as a folk instrument. From
Spain the harp was taken to the new world by missionaries and
developed in a completely different way. The indigenous peoples were fascinated
with the instrument; they made some changes to it and adopted it as part of their
own culture.
42 User’s Guide to Garritan Harps
There are many kinds of harps in Latin America, including
the Mexican harp and two different Venezuelan harps, arpa
mirandina and arpa llanera (harp of the plains). Almost all
South American countries have their own versions of harps.
In construction and playing techniques, these harps are quite
different from the traditional European harps. They are made
of thin wood (cedar and pine) and are much lighter than the
European harp. The playing style and techniques are vibrant
and dynamic in contrast to the softer European tone. Most
South American harpists do not read music; many of the folk
songs have been handed down from generation to generation.
The Paraguayan harp is the most popular of the South
American harps and is the national instrument of Paraguay.
It has 36 nylon strings tuned to the diatonic scale, is played with the fingernails,
and has a bright tone quality. At right is a picture of my harp from Ecuador.
THE RENAISSANCE
By the time of the Renaissance, the organ was gaining popularity and other
keyboards began appearing such as the clavichord and harpsichord. Essentially,
the “harp”sichord is a mechanized horizontal harp where a string is plucked when
a note on the keyboard is pressed. This was new technology, the MP3 of the time.
Keyboards made it possible to play all 12 notes of the octave, establishing the 12note system of Western music. The harp remained only capable of playing seven
notes per octave. The music of the major composers in the 16th to 18th centuries
demanded more notes than the diatonic harps could play. It was the lack of a
full chromatic scale that was identified as the main ‘defect’ of the harp. Attempts
were made to enable the harp to be more versatile by getting around its diatonic
limitations. One solution was a chromatic harp, a harp with 12 strings per octave.
Chromatic harps were built in Spain in the 16th and 17th century. A double harp
with two rows of strings was first described in the writings of Vincenzo Galilei in
1581. Soon afterwards, the triple harp appeared, where the player would reach
between two diatonic rows of strings to play the chromatic notes in between.
Charles I of England was noted to have engaged a triple harpist in the mid-1600s.
The earliest surviving triple harp is in the Museo Civico and dates back to the late
17th century.
User’s Guide to Garritan Harps 43
Another solution to the harp’s note limitations was to
take the existing seven diatonic notes and change the
pitch of selected strings to get sharps and flats. Hooks
were first used in Tirol in southern Austria in the 17th
century to sharp individual notes by hand. One
drawback of the hooked harp was that a performer
temporarily lost the use of the hand for plucking while
making these adjustments. Although these attempts
were forward leaps, they also made the harp difficult
and awkward to play. Composers continued either to
ignore the harp or include it sparingly for swirly
effects—this despite the fact that Haydn, Weber,
Rossini, Liszt, Chopin and Mendelssohn are all known to
have been harp players. Bach never wrote for the harp;
Handel used the Welsh triple harp only a few times in his operas and oratorios.
Haydn never used it in his orchestral works, but did write one sonata for flute,
harp and double bass. Mozart wrote just one work for the harp, his famous
Concerto for Flute, Harp, and Orchestra in C major.
Around 1720, the Florentine harpsichord maker Bartolomeo Cristofori developed
the piano. This instrument was shaped like a harpsichord, but the strings were
struck rapidly with felt-covered hammers, not plucked as in harpsichords.
Bartolomeo called his invention a harpsichord with piano e forte (soft and loud)
and the instrument was a success. At the same time the piano was invented,
the pedal harp was also invented. The first single-action pedal harp could raise
the pitch of the selected strings by a half-step, allowing the harp to play in
most keys. In 1720 the Bavarian Celestin Hochbrucker added seven pedals that
controlled the hooks via levers set in the forepillar. Hochbrucker’s single-action
pedal harp was improved in 1750, when Georges Cousineau replaced the hooks
with metal plates that gripped the strings while leaving them in plane, and was
further improved in 1792, when Parisian Sébastien Érard substituted rotating disks
for the metal plates. Érard developed the double-action harp, where a string
could be both raised and lowered a half-step.
MODERN
The piano became a mass-produced instrument of the industrial revolution
and grew more and more popular with the public. The harp became unpopular,
being viewed as high-class. The handmade harp could not compete with the
mass-produced piano. The piano was cheaper and easier to play; pianists could
44 User’s Guide to Garritan Harps
perform the new music of Debussy, Ravel, Gershwin and other contemporary
composers. Piano repertoire continued to grow and the number of pieces for
harp dwindled. Ragtime became the newest rage and many wanted to play piano.
The harp enjoyed some renewed interest when Harpo Marx, the self-taught harpplaying mute of the Marx Brothers, brought the harp to the silver screen. Harpo
was an incredible harpist (and my inspiration to play the harp).
Despite Harpo’s appeal and antics, the harp continued to lose popularity. The
harp became so unpopular that in the 1940s, when the Royal College of Music
in England decided to get rid of some instruments, two dozen harps—perhaps
a half million dollars worth today—that weren’t being used were simply chopped
up. Harps became increasingly scarce. Only a few harps were made in the 1950s
and 1960s, while, fueled by rock and roll, electric guitar sales skyrocketed.
Since the 1980s, the harp has been enjoying a comeback.
Andreas Vollenweider, the Swiss harpist, electrified his harp
and his audiences. Andreas played his electroacoustic harp
as the lead instrument accompanied by a contemporary-style
band with drums, percussion, keyboard and guitar. Vollenweider
attracted a worldwide audience, sold millions of records
worldwide and spawned a new interest in the harp. Harp
pioneers such as Daphne Hellman and Deborah Henson-Conant
showed the range of the harp’s potential in jazz and other
contemporary music.
The public’s fascination with New Age, world, and Celtic musics also attracted
interest in the harp. Canadian harpist Loreena McKennitt climbed the charts
with her haunting vocals accompanied by her Celtic harp. The harp continues to
enjoy a renaissance today. The popular animated television sitcom The Simpsons
has a harp introducing its theme. Contemporary music recordings, radio, and TV
regularly feature harps. There is also a swelling grassroots interest in the folk
harp. Major magazines and television features have reported on the positive
impact that harp music is having with patients.
User’s Guide to Garritan Harps 45
THE ELECTRONIC MIDI HARP AND THE GIGAHARP
Although the traditional harp and Celtic harps were again
gaining popularity, the harp had not changed much in nearly
200 years. Rapid advances in technology were made in
keyboards and guitars, yet few changes were made with the
harp: the technological revolution seemed to have left the
harp behind. In the early 1990s, with the help of the Center
for Music Research, I invented and built the prototype of the
world’s first Electronic MIDI (Musical Instrument Digital
Interface) Harp. The harp featured solid-body construction
(more portable) and could be connected to a computer. It
was capable of triggering sampled instruments, just like a
MIDI keyboard or MIDI guitar. With the Electronic MIDI Harp, notes could appear
on-screen while the strings were played.
Although the Electronic MIDI Harp could make many sounds, it did not sound like
an authentic acoustic harp. In 1999, I developed the GigaHarp, a sample library
developed for Nemesys GigaSampler which allowed not only the Electronic Harp
but also any MIDI keyboard to play high-quality, realistic harp sounds. The latest
advances in sampling technology made digital recordings of each individual
string possible. The recordings could then be loaded into a personal computer
and played back in real-time using a connected MIDI keyboard. Every note of the
harp was recorded in four dynamics, from soft plucks to loud plucks. A unique
harp pedal emulation was also developed to allow the pedal changes to be
programmed.
Sampling is ideally suited for reproducing the sounds
of the harp. Each string, with its own individuality
and unique characteristics, can be recorded as
high-fidelity audio and reproduced. Sampled harps
can indeed sound surprisingly close to their actual
stringed counterparts, especially if they are highquality recordings. Garritan Harps takes the GigaHarp
exponentially further. In addition to pure, pristine
recordings of each note, new technologies allow for a
variety of plucks, glissando emulation, and much more.
Who ever would have thought that a virtual harp could be this good on this side
of heaven? The history of the harp continues…
46 User’s Guide to Garritan Harps
“The harp will always be
the instrument of heaven.”
—Gary Garritan
User’s Guide to Garritan Harps 47
PLAYING GARRITAN HARPS
48
LOADING INSTRUMENTS
With Garritan Harps it is possible to start making music within moments after
installing the library. Some of the concepts/controls presented here are different
than those found on a typical harp and may be unfamiliar at first. This may be
more challenging for the professional harpist, but the controls of Garritan Harps
are easy to master and offer some additional capabilities.
Harp patches are selected and loaded into instrument slots. They can be turned
on or off with Solo/Mute buttons or controlled with volume sliders. Volume is
controlled via sliders for each patch. After patches are loaded there are various
ways of controlling them.
There are two basic ways to load instruments: manually load instrument patches
into slots one at a time, or use ensemble templates (see section entitled
“Ensemble Presets”).
User’s Guide to Garritan Harps 49
Manually Load Instruments into Slots: Click the instrument slot in the ARIA
Player to select the Harps instrument patches. Select empty to remove an
assigned patch from a channel and choose reload to restore the default
parameter settings for that patch.
The patches are grouped in a simple hierarchical menu by sample library. You
can choose your Harps patches by instrument: Salvi Pedal Harp 1, Salvi Pedal
Harp 2, Venus Concert Grand 1, Venus Concert Grand 2, Lyon & Healy Harp, and
Gliss Harps.
You can load up to sixteen instruments for each instance of the ARIA Player
(slots 1 through 16). For more slots, call up additional instances of ARIA in your
sequencer or notation program. The number of instances is limited only by the
power and resources of your computer and host program.
MIDI Channel Assignment: Each ARIA Player slot has an
assigned MIDI channel. MIDI channel assignments can be
chosen by clicking on the assignment number for the
slot. This will bring up the drop-down menu shown on the
left, from which you can click on the desired MIDI
channel. The same MIDI channel can be assigned to more
than one slot for combinations and mixtures.
Garritan Harps also includes a directory called
“Ensembles” that contains a collection of useful,
preconfigured combinations of patches for the
convenience of the user. Simply select the ensemble
preset you wish to load or recall. Loading an ensemble
can give you a head start to setting up a useful collection
of ready-to-play patches (see section entitled “Ensemble
Presets”).
50 User’s Guide to Garritan Harps
MAKING SOUNDS
Once installed and activated, you can load Garritan Harps into the ARIA Player.
Garritan Harps includes an extensive array of orchestral instruments, playing
techniques, and playback effects. You can play these instruments:
1. By using the virtual on-screen keyboard in the ARIA Player,
2. By connecting a MIDI-compatible keyboard to your computer,
3. As a plug-in in your sequencer, or
4. In a supported notation program (such as Finale®).
1. USING THE VIRTUAL ON-SCREEN KEYBOARD
You can use the virtual keyboard at the bottom of the ARIA Player to play and
audition instruments. The virtual keyboard displays the range of notes that can
be played for the instrument patch that is loaded (indicated by the white notes).
Keys that are being played will be highlighted in real time.
To play the virtual music keyboard, click the notes on the keyboard with your
mouse. Clicking a note towards the bottom of the key plays the note with greater
key velocity (like pressing a key harder), and clicking a note towards the top of
the key plays the note with less key velocity (like pressing a key more softly).
2. USING A MIDI KEYBOARD WITH YOUR COMPUTER
(STANDALONE ‘LIVE’ PLAY)
Garritan Harps can be launched by itself and played live via MIDI keyboard or
other MIDI controllers. The standalone version of Garritan Harps effectively makes
your computer, audio hardware, and MIDI keyboard into a virtual instrument
that can be played independently of other programs. This mode is ideal for
practicing, silent play, and live playing. The limitation is that you can usually play
only one instrument at a time. Unlike using it as a plug-in within a sequencer, your
User’s Guide to Garritan Harps 51
recording ability is limited and you cannot edit your performance (though you can
use various audio software programs for this).
To launch Garritan Harps as a standalone program, double-click on the ARIA
Player icon on your desktop or launch it from your Applications folder (Mac) or
Start menu (Windows).
If your keyboard is a USB MIDI keyboard, simply connect the music keyboard to
your computer using a USB cable. If your keyboard is a standard MIDI keyboard,
connect the keyboard to your MIDI interface using standard MIDI cables, then
connect the interface to your computer. Click Tools > Preferences to open the
ARIA Preferences window. Your MIDI control device should appear in the MIDI
Input Devices menu. Make sure that your device has a checkmark next to it.
Play MIDI Files and Record
The standalone ARIA program also features a MIDI File Player and audio
recording system located on the bottom of the screen. With these controls
you can load existing MIDI files into the ARIA Player to play back, and you can
also record yourself playing live.
N:
Be sure to refer to the manual that came with the keyboard and install the most recent
keyboard drivers. For more information about using the ARIA Player, please refer to the
ARIA User’s Manual.
3. USING GARRITAN HARPS AS A PLUG-IN FOR
SEQUENCERS AND DAWS
When used as a plug-in, Garritan Harps is not a standalone program but rather a
virtual instrument module that can integrate seamlessly with many popular music
software programs (assuming that the program supports such virtual instrument
plug-ins). These are called “plug-ins” because they are modular software
programs that run inside a “host” music program, such as a sequencer or digital
audio workstation (DAW).
MIDI sequencing is similar to old player pianos that used mechanical techniques
to reproduce performance. MIDI sequencers use digital data to record and
reproduce performances. A major advantage to using a sequencer is that all
52 User’s Guide to Garritan Harps
settings are saved together with the song files and are totally retained and
recalled upon reload.
Garritan Harps supports VST, Audio Units, and RTAS plug-in formats. Each music
software program has its own approach to handling virtual instrument plug-ins.
Each has its own installation method and means of loading and accessing
plug-ins. It is important to make sure that you refer to the instructions in your
music software application’s manual regarding the loading and operation of
virtual instrument plug-ins.
Regarding VST Plug-ins:
At installation you will be prompted for the vstplugins folder directory. The
installer will attempt to locate an existing vstplugins folder, or you can specify
your own. You may need to re-scan the folders to have ARIA Player VST
appear in the list of software instruments.
Regarding AU (Audio Units—Mac Only):
The ARIA Player will install into the default Mac OS X AU plug-ins folder, after
which it will be readily available to your Mac music software.
Regarding RTAS (Pro Tools systems only):
The ARIA Player will automatically install the RTAS plug-in to its proper
location to work with Pro Tools.
S A:
For more information about using the ARIA Player as a plug-in, please refer to the ARIA
User’s Manual.
User’s Guide to Garritan Harps 53
4. USING GARRITAN HARPS IN NOTATION PROGRAMS
Notation is a fundamental part of music creation. Notation programs such as
Finale allow you to easily create and print sheet music and play back your score
with your computer. Garritan has a long history of pioneering the use of notation
software programs with samples.
Garritan Harps can be used directly from within Finale (or other notation
programs that are capable of hosting virtual instrument plug-ins). Garritan Harps
supports VST and Audio Units plug-in formats.
Scoring in a notation program can be very mechanical and often lacks the
feeling, phrasing, and nuance of music that is performed live. Features like
Human Playback™ within Finale provide an advanced set of algorithms to
enhance and “humanize” the playback of notation files. Garritan Harps has been
optimized for use with Finale’s Human Playback.
S A:
For more information about using Garritan Harps with notation, please refer to the
instructions in your notation program’s manual regarding the loading and operation of
virtual instrument plug-ins. Some notation programs may not support software virtual
instrument plug-ins.
54 User’s Guide to Garritan Harps
CONTROLS
VELOCITY (CC#12)
This control sets the current velocity amplitude tracking depth. Higher values
will increase the amount of depth that the current amplitude envelopes have on
the triggered notes. With a higher depth setting lower velocities will be naturally
softer in amplitude, and higher velocities will have reached the maximum
amplitude values. Lower velocity settings will result in all velocity input having
close to the sample amplitude regardless of input velocity values.
RELEASE (CC#72)
Sustain pedal can be too long at times. This control affects normal release mode
to allow tailored sustains throughout larger sequences where muddiness can
occur.
PICK NOISE (CC#13)
This control sets the depth/amount of pick noise to be added. Currently picked
noise layers only exist on Picked and Pres de la Table keyswitches. This control
will not have any effect on articulations besides Picked and Pres de le Table
throughout the library.
User’s Guide to Garritan Harps 55
SOFT (CC#74)
Use this control to soften the character of your harp. It works well as a
controllable MIDI CC, so that the harp can take on a brighter and darker
character throughout the performance and movement of a piece.
AGGRESSIVE (CC#81)
Use this control to add more forcefulness and ‘grit’ to the attack of the harps. It
utilizes the ARIA Player’s saturation effect to alter the attack transients.
LIVE MODE (CC#99, “VAR”)
This controls the new variation programming which is premiering in Garritan
Harps, providing a more realistic ‘humanized’ performance. For producers and
composers who want their compositions to sound identical in every performance,
switch Live Mode off. It is important to note that this programming has not been
included within the Pedal Mode nor the Gliss patches yet.
PEDAL MODE (CC#29)
This toggle switch enables the Pedal
Mode, allowing the Pedal Configuration
slider controls to be used. The Pedal
Mode is a modern implementation for
emulating the foot pedals of an
orchestral harp. This is how you can
achieve playable glissandi without the
need for MIDI packets or other
complicated setups.
The Pedal Mode sliders represent the seven pedals on the harp. Our
implementation also offers double sharps and double flats, which are not
possible on a real harp, yet offer even more advantage for producers looking for
the easiest way to program and play custom harp glissandi. Each pedal has its
own MIDI CC number as follows:
PEDAL
MIDI CC#
56 User’s Guide to Garritan Harps
C D E F G A B
39 40 41 42 43 44 45
The slider for each pedal responds to the values in the following table:
SLIDER POSITION VALUES
Double-flat Flat Natural Sharp Double-sharp
025 2651 5276 77101 102127
STEREO STAGE CONTROL
When Stereo Stage is turned off,
instruments can be panned from left to
right in the usual way, positioning them left
to right by relative left/right volume
intensity only. When Stereo Stage is turned
on, it simulates the arrival times from the
position of the instrumental sound source to a pair of virtual stereo microphones,
plus the first reflections from side walls, rear walls, and the ceiling. This can
create a more three-dimensional image for positioning instruments on the stage,
both left to right and front to back. There are two Stereo Stage controls available
on the Controls page of the ARIA player.
1. On/Off button. This toggle switch activates and disables Stereo Stage,
lighting when activated. This switch can also be controlled using CC#103.
2. Depth. This sets the position of the instrument front to back on the
stereo stage. Small percentage numbers place instruments closer to
the microphones; larger percentages place instruments farther back on
the stage, with 100% being near the back wall of the stage. The Depth
parameter can also be controlled with CC#36.
When Stereo Stage is activated, the panning knobs in the mixer section of ARIA
still control the left to right positioning.
User’s Guide to Garritan Harps 57
TIMBRE (EQ) CONTROLS
Controlling timbre/EQ enables you to
produce a clearer sound. When many
instruments are added and played at once,
the sound can become muddy. Judicious
mixing and EQ can reduce sonic clutter so
that combinations have better clarity and
transparency, creating breathing room for the voices, so parts can be heard
distinctly and clearly. In addition, the EQ controls can extend tonal range and
allow better matching of sounds across the various harp patches.
The Precision EQ is a three-band equalizer, with each band having a separate
gain knob (–24dB to +24 dB). The “Low” controls the filter’s gain for the bottom
of the spectrum, the “Mid” controls the midrange frequencies, and the “High”
controls the top end of the frequency spectrum. You can adjust these by placing
your cursor over the desired knob, left clicking/holding, and moving the mouse
up and down. Release the mouse button at the desired number.
58 User’s Guide to Garritan Harps
MIDI CONTROLLER QUICK REFERENCE
MANUAL
CONTROLS
Volume
Pan
Velocity
Pick Noise
Pedal Mode
Pedals
Release
Soft
Aggressive
Live Mode (“Var”)
Stereo Stage
(“MIC Config”)
Stereo Stage Depth
MIDI
DESCRIPTION
CC#
7 Controls the overall presence of the loaded instrument
in the mix. The instrument fader is located on the Mixer
window.
10 Controls the panning of the loaded instrument. The pan
knob is located on the Mixer window.
12 Controls the “touch” of plucks to allow for more or less
intensity by setting the width of the key velocity range.
Higher values allow for greater variation in key velocity.
13 Controls the amount of finger pluck sound. Pick
noise layers only exist on Picked and Pres de la Table
keyswitches.
29 Turns pedal mode on or off, emulating the foot pedals of
the harp. Turning this control on allows the pedal slider
controls (CC#3945) to be used. Values 063 are off,
64127 are on.
3945 For use with Pedal Mode (C through B). Set to 025 for
double-flat; 2651 for flat; 5276 for natural (default);
77101 for sharp; and 102127 for double-sharp.
72 Controls the amount of time a note is sustained/decays.
Higher values increase length of decay.
74 Controls overall brightness of the sound. Higher values
soften the character of the sound.
81 Controls overall aggressiveness of the sound. Higher
values make the tone more aggressive.
99 Controls the amount of variation of tuning and volume
between notes for a more “organic” sound. For no
variation in sound, set this controller to 0.
103 Turns stereo stage on or off. Values 063 are off, 64127
are on.
36 Controls the position of the instrument front to back
on the stereo stage. Higher values place instruments
farther back on the stage, with 100% being near the
back wall of the stage; lower values place instruments
closer to the microphones.
User’s Guide to Garritan Harps 59
EFFECTS
REVERBERATION
Reverberation describes the phenomenon that occurs when a sound is made
in an ambient space and is reflected or absorbed by the surfaces in that space.
Reverb is perhaps the most widely-used audio effect, since it emulates the sound
that’s heard literally everywhere around us. The ARIA Player includes two types of
reverb: Ambience (algorithmic reverb) and Convolution (sampled reverb).
AMBIENCE REVERB
The ARIA Player’s Ambience reverb effect rivals the quality of the best
commercial reverbs. Just as softsynth plug-ins represent virtual instruments
designed to simulate musical instruments, Ambience allows you to simulate
the reverberation of a cathedral, concert hall, and many other spaces.
Ambience is turned ON by default; to deactivate it, you must click the ONOFF
button located on the Effects window in the ARIA Player interface. It may not
be necessary to use Ambience Reverb if you have your own separate reverb
or convolution program.
N:
To control the amount of reverb for each instrument, use the Send knobs in the
Mixer window. The Send knob controls the amount of signal sent to the Ambience
Reverb for each corresponding channel.
Ambience has a number of performing
space presets to choose from. These
presets have been custom-made and it is
recommended that you begin with these
presets. Presets include Ballroom 1 & 2,
Cathedral, Church, Concert Hall 1 & 2, Jazz
Club 1 & 2, Parlor, Piano Hall 1 & 2, and
Recital Hall 1 & 2. You can also edit these
presets or experiment with the various
settings to customize the acoustical
environment as needed.
60 User’s Guide to Garritan Harps
There are nine main controls in the
Ambience control panel. The most
important parameters are Decay (the
time for the reverb to fade away), Size
(the size of the room), and Predelay
(timing of first reflection). Below is a
fuller description of the controls in
Ambience:
• DECAY — This controls the time it takes for the reverb reflections to fade
away into silence.
• DIFFUSION — Diffusion is the reflecting surface’s ability to spread the
reverb out. This control has a subtle effect on the sound and is especially
noticeable with small room sizes.
• SIZE — This controls the size of the room. Note that long reverb time
(decay) and small room size do not mix well. For natural sounds, the room
size should correspond with the length of the reverb time.
• PREDELAY— This controls the amount of time between the direct sound
and the first of the reverb reflections. It is predelay that defines our
perception of the size of the room.
• WIDTH — This controls the stereo spread from mono (0%) all the way to a
wide stereo (100%). It is recommended that the width be set close to 100%.
• QUALITY — This controls the render quality of the reverb effect. High
quality equates to high CPU usage. If there is too much CPU demand on
your machine while running ARIA, try turning down the quality. You can also
make fun effects if you set this control very low (try it!).
• EQUALIZER — These four knobs provide a two-band EQ to control the
overall timbre of the reverb. They can be useful for cutting away bass
that can otherwise make the reverb sound muddy. They can also help to
simulate the roll-off in response at high frequencies that is characteristic
of most concert halls
• DAMPING — This controls how the character of the reverb develops over
time as it decays. Similar to the 2-band Equalizer, use this to control the
decay time of bass and treble independently.
• LEVEL — This controls the amount of the processed reverberant sound.
N:
It is important to bypass the on-board reverb of the ARIA Player when using a separate
reverb or convolution effect in your host program. Failing to bypass the Ambience reverb
will compound the reverb effect and the resultant sound will be very muddy.
User’s Guide to Garritan Harps 61
Convolution Reverb
ARIA also includes an ultra-optimized
convolution engine for high-quality
sampled reverb which offers zero-latency
processing with low CPU overhead. Just
as the sounds of this library contain
sampled musical instruments, the
Convolution reverb was created by
sampling the reverb in an actual acoustic
space, such as a concert hall or cathedral,
that one wouldn’t normally have an
opportunity to record in. Because of this,
Convolution faithfully reproduces the
natural-sounding reverberations that have
been captured from these real physical
spaces, down to their minutest details and nuances. Rather than providing a
simulation synthesized by an algorithmic reverb (Ambience), the samples of a
convolution reverb effect are well known for their realism.
An impulse response is the recording of the reverberation that is produced
in an acoustic space when an impulse sound is played in that space. It
represents a sonic signature of that sampled space.
For the individual harp patches, Convolution reverb is turned OFF by default
and to activate it you must click the ONOFF button located on the Effects
window in the ARIA Player interface. For the Harps ensembles, Convolution is
ON by default and Ambience Off.
N:
To control the amount of reverb for each instrument, use the Send knobs in the
Mixer window. The Send knob controls the amount of signal sent to the
Convolution reverb for each corresponding channel.
It may not be necessary to use Convolution Reverb when using Ambience or
vice versa. Additionally, there are some situations where you may want to use
both Ambience and Convolution reverbs to exaggerate a certain space or
element. There are two controls available for the Convolution reverb effect:
• PREDELAY — This control adjusts the length of the reverb tail, or how fast
the reverb dies down.
• LEVEL — This control adjusts the level of room contribution.
62 User’s Guide to Garritan Harps
The ARIA Player includes
an impressive collection of
10 impulse responses, with
an additional 7 impulse
responses unique to the
Garritan Harps library.
Included are the glorious
sounds of cathedrals,
churches, well-known
symphonic concert halls,
and other stunning
acoustic spaces.
• Chapel — Sampled reverb from a famous chapel in Cambridge,
Massachusetts, USA.
• Film Score Space — Sampled reverb from a well-known film scoring space
in Seattle, Washington, USA that has been used for many popular movies.
• Large European Cathedral — Sampled reverb from a large cathedral in the
Czech Republic.
• Large Symphonic Concert Hall — Sampled reverb from a well-known large
concert hall located in Seattle.
• Medium Piano Concert Hall—- Sampled reverb from one of the best piano
halls located in upstate New York.
• Modern Symphonic Concert Hall — Sampled reverb from a modern state-
of-the-art concert hall located in Vancouver, British Columbia, Canada.
• Small Chamber Space — Sampled reverb from a small chamber recording
space in Boston, Massachusetts, USA.
• Small Orchestra Hall — Sampled reverb from a small concert hall located
in Brno, Czech Republic.
• Traditional Symphonic Concert Hall — Sampled reverb from the Dvorak
Hall (the Rudolphium), a large traditional concert hall in Prague, Czech
Republic.
• Underground Cave — Sampled reverb from an underground cave located
in the Czech Republic.
N:
You can use both Ambience reverb and Convolution to shape your room sound. Both
Ambience reverb and Convolution must be set to ON to use both effects simultaneously.
Also, it is important to bypass the on-board reverb of the ARIA Player when using a
separate reverb or convolution effect in your host program. Failing to bypass the Ambience
reverb will compound the reverb effect and the resultant sound will be very muddy.
User’s Guide to Garritan Harps 63
SCALA FILES FOR HISTORIC TUNINGS
The ARIA Player includes a control on
the Settings window that provides a
variety of tunings that can be
imported and used with Garritan
Harps. This can be useful in playing
historic pieces using a tuning
appropriate to the era. Differing
temperaments can add extra color
and warmth to the sound. Scala files can also provide detuning for more
authentic sounds.
The Scala file import feature enables the use of thousands of other tunings that
can be found on the internet. The ARIA Player includes 16 built-in tunings; by
default, the equal temperament tuning is loaded.
To choose a different tuning, click the Import button. The dialog shown below
appears, displaying the 16 installed tunings and any others placed in the Scales
folder. Choose one of the Scala files and click Open to apply the tuning.
The Scala Center option allows you to select the tonic note of your scale. By
default, this is set to C5. The Tuning option allows you to select from eleven base
frequencies for the note A4. By default, this is set to A4 = 440 Hz.
64 User’s Guide to Garritan Harps
ENSEMBLE PRESETS
65
LOAD MULTIPLE PATCHES EASILY
The Garritan Harps installation includes a
folder/directory called “Ensembles” that
contains a collection of useful, pre-configured
ensembles for your convenience. Each
ensemble preset loads a selection of
instruments along with pan, level, and other settings. The Ensembles folder can
be found in the Garritan installation folder. By default, this folder is located at
/Garritan/ARIA Player/Presets/com.Plogue.Aria/Garritan Harps.
LIST OF ENSEMBLE PRESETS: COMBOS
Ensemble
Name:
Cluster Harps Salvi Gliss Harp 1 Sustain, Salvi Gliss Harp 2 Sustain, Lyon & Healy Gliss Harp
In the Clouds Salvi Harp 1 Sustain, Venus Harp 2 Picked
Instruments Included:
1 Sustain.
Percussive
Space Harps
Ready for the
Concert
Super Wide and
Soft
Super Wide Lyon & Healy Harp 1 Sustain, Venus Harp 2 Sustain
This Isn’t a Harp Salvi Harp 1 Damped, Salvi Harp 1 Harmonics
Wall of Harps Lyon & Healy Harp 1 Sustain, Venus Harp 1 Sustain, Salvi Harp 1 Sustain, Salvi
Salvi Harp 2 Picked, Venus Harp 2 Picked
Lyon & Healy Harp 1 KS
Lyon & Healy Harp 1 Sustain, Venus Harp 1 Sustain
Harp 2 Sustain
Although not technically ensembles, there is also a wide variety of preset glisses
provided so that you do not have to individually set each pedal. These presets
are organized by the tonic note of the scale or chord. In addition, there are six
special scale presets (Blues, Enigmatic, Hungarian Major, Persian, Romanian,
Unrealistic) and four whole tone scales. All of these presets are located under the
Glisses category.
66 User’s Guide to Garritan Harps
LOADING ENSEMBLE PRESET FILES
In standalone mode there are two ways to load ensemble preset files. First,
you can load them from the File menu (File > Load). Second, you can use the
drag and drop method by opening the “Ensembles” folder/directory, dragging
the desired ensemble preset onto the ARIA interface, and releasing the mouse
button. The instruments and their configurations will load automatically. When
ARIA is used as a plug-in from within a host program, the drag and drop method
is recommended for loading ensemble files.
N:
Note that in Standalone mode you can create customized ensemble files. Just load the
stops you want and adjust their settings to your liking. Choose File > Save As to save the
preset.
User’s Guide to Garritan Harps 67
DIRECTORY OF HARP PATCHES
68
GARRITAN HARPS PATCH LIST
SALVI PEDAL HARP 1 PATCH LIST
SALVI PEDAL HARP 1
Patch Name: Description:
Salvi Harp 1 KS The ‘master’ patch which contains all of the articulations. The
articulations can be accessed by their representative keyswitches.
Salvi Harp 1 Sustain The normal (undamped) pluck articulation. This is the most common
harp articulation.
Salvi Harp 1 Picked A normal pluck articulation that additionally triggers the pick noise
set by the controller knob on the Controls view.
Salvi Harp 1 Harmonics String harmonics, sounding an octave higher than the normal string.
Salvi Harp 1 Pres de la
Table
Salvi Harp 1 Damped Also known as muffling, the damping articulation features a
The articulation patch for the pres de la table technique (near the
soundboard).
specialized sample set for a natural-sounding release. This has a
character very much like a soft harmonic.
SALVI PEDAL HARP 2 PATCH LIST
SALVI PEDAL HARP 2
Patch Name: Description:
Salvi Harp 2 KS The ‘master’ patch which contains all of the articulations. The
articulations can be accessed by their representative keyswitches.
Salvi Harp 2 Sustain The normal (undamped) pluck articulation. This is the most common
harp articulation.
Salvi Harp 2 Picked A normal pluck articulation that additionally triggers the pick noise
set by the controller knob on the Controls view.
Salvi Harp 2 Harmonics String harmonics, sounding an octave higher than the normal string.
Salvi Harp 2 Pres de la
Table
The articulation patch for the pres de la table technique (near the
soundboard).
Salvi Harp 2 Damped Also known as muffling, the damping articulation features a
specialized sample set for a natural-sounding release. This has a
character very much like a soft harmonic.
User’s Guide to Garritan Harps 69
VENUS CONCERT GRAND 1 PATCH LIST
VENUS CONCERT GRAND 1
Patch Name: Description:
Venus Harp 1 KS The ‘master’ patch which contains all of the articulations. The
articulations can be accessed by their representative keyswitches.
Venus Harp 1 Sustain The normal (undamped) pluck articulation. This is the most common
harp articulation.
Venus Harp 1 Picked A normal pluck articulation that additionally triggers the pick noise
set by the controller knob on the Controls view.
Venus Harp 1 Harmonics String harmonics, sounding an octave higher than the normal string.
Venus Harp 1 Pres de la
Table
Venus Harp 1 Damped Also known as muffling, the damping articulation features a
The articulation patch for the pres de la table technique (near the
soundboard).
specialized sample set for a natural-sounding release. This has a
character very much like a soft harmonic.
VENUS CONCERT GRAND 2 PATCH LIST
VENUS CONCERT GRAND 2
Patch Name: Description:
Venus Harp 2 KS The ‘master’ patch which contains all of the articulations. The
articulations can be accessed by their representative keyswitches.
Venus Harp 2 Sustain The normal (undamped) pluck articulation. This is the most common
harp articulation.
Venus Harp 2 Picked A normal pluck articulation that additionally triggers the pick noise
set by the controller knob on the Controls view.
Venus Harp 2 Harmonics String harmonics, sounding an octave higher than the normal string.
Venus Harp 2 Pres de la
Table
The articulation patch for the pres de la table technique (near the
soundboard).
Venus Harp 2 Damped Also known as muffling, the damping articulation features a
specialized sample set for a natural-sounding release. This has a
character very much like a soft harmonic.
70 User’s Guide to Garritan Harps
LYON & HEALY HARP PATCH LIST
LYON & HEALY HARP
Patch Name: Description:
Lyon & Healy Harp 1 KS The ‘master’ patch which contains both of the articulations. The
articulations can be accessed by their representative keyswitches.
Lyon & Healy Harp 1
Sustain
Lyon & Healy Harp 1
Picked
Lyon & Healy Harp 1
Harmonics
The normal (undamped) pluck articulation. This is the most common
harp articulation.
A normal pluck articulation that additionally triggers the pick noise
set by the controller knob on the Controls view.
String harmonics, sounding an octave higher than the normal string.
GLISS HARPS PATCH LIST
GLISS HARPS PEDAL MODE ONLY
Patch Name: Description:
Salvi Gliss Harp 1 Sustain The normal (undamped) pluck articulation for the Salvi Pedal Harp 1.
Salvi Gliss Harp 1 Picked A normal pluck articulation for the Salvi Pedal Harp 1 that
additionally triggers the pick noise set by the controller knob on the
Controls view.
Salvi Gliss Harp 1 Pres de
la Table
The articulation patch for the pres de la table technique (near the
soundboard) for the Salvi Pedal Harp 1.
Salvi Gliss Harp 2 Sustain The normal (undamped) pluck articulation for the Salvi Pedal Harp 2.
Salvi Gliss Harp 2 Pres
de la Table
Venus Gliss Harp 1
Sustain
Venus Gliss Harp 2
Sustain
Lyon & Healy Gliss Harp 1
Sustain
The articulation patch for the pres de la table technique (near the
soundboard) for the Salvi Pedal Harp 2.
The normal (undamped) pluck articulation for the Venus Concert
Grand 1.
The normal (undamped) pluck articulation for the Venus Concert
Grand 2.
The normal (undamped) pluck articulation for the Lyon & Healy Harp.
User’s Guide to Garritan Harps 71
ADDENDUM
72
GETTING STARTED
You can use any of the Garritan libraries on their own, for live play with a MIDI
keyboard or other MIDI controller, or as a plug-in with a notation program or
DAW. All of the Garritan libraries are accessed through the ARIA Player and
can be used interchangeably with each other. The first step to bringing your
music to life with the Garritan sounds is to learn to use the ARIA Player. This
will give you control over basic functions such as mixing and panning, as well
as instrument-specific performance techniques such as bowings, articulations,
vibrato, special effects and much more.
The ARIA Player manual will guide you through the basics of the ARIA interface
and controls. For more information about each library and the instrument-specific
controls, refer to the library-specific guides. You will find all of these manuals in
the library installation folder on your computer.
GETTING SUPPORT
If you are experiencing a technical problem with the ARIA Player or one of the
Garritan libraries, visit our support page at www.garritan.com/support. There,
you can search our Knowledge Base for answers to common questions, visit the
Garritan forum for suggestions from users of Garritan software, or submit a case
to our support team.
S A:
Regarding third-party customer service: if you are using a Garritan library as a plug-in in a
third-party host program, please contact the program manufacturer for support.
UPDATING YOUR SOFTWARE
Updates are released regularly to fix known problems and improve the software.
Be sure to check www.garritan.com/support for any possible updates that have
occurred since the time your software was manufactured. The ARIA Player is
frequently updated and a more recent version may be available.
User’s Guide to Garritan Harps 73
ACKNOWLEDGMENTS
Producing Garritan Harps would not have been possible without the combined
help, talent, and support of many extraordinary people. I am grateful to those
who have been a part of this project.
Many thanks to all the harpists who endured sore fingers and long sessions
playing endless scales. Thanks to Heidi Soons, who played the Lyon & Healy
Style 23 concert grand harp. We would also like to thank Lane Gibson, who was
the engineer for the session. Thanks also to McGill University and especially to
Joel Wapnick and Frank Opolko for the recording of one of the harps in Montreal.
Thanks to my harp teachers Atahualpa Poalasin and Daphne Hellman.
I especially wish to thank Chad Beckwith for the exceptional programming of
this harp library. Thanks also to Robert Davis, who came up with some of the
innovative pedaling programming. Thanks to Tom Hopkins, who did the initial
GigaHarp programming, and Jeannot Welter for sample editing.
Thanks to Jonathan Tschiggfrie and Erin Vork for their work on the manual. Many
thanks to Scott Menk for his extraordinary artwork. And thanks again to Robert
Davis for his thorough testing and harp demos.
I wish to thank our beta team who provided valuable input: Fred Flowerday,
Jim Ortner, Justin Phillips, Prof. Jim Williams, Tony Monaghan, Dan Kury, Peter
Jones, Robert Davis, Bill DeWitt, Jack Cannon, Robert Tewes, Peter O’Regan, Petr
Pololáník, Jeremy Soule, and Randy Bowser; many thanks to David Sosnowski for
harping on me.
The custom-made ARIA sample engine for Garritan Harps was developed
by Plogue Art et Technologie, Inc. David Viens and his team took up the task
brilliantly and brought forth the technologically stunning ARIA sample engine
used for this project. A special thanks to Max Deland and Chris Anderson for
helping to manage this project.
Many thanks and bravos to Karen VanDerBosch (COOCFO and acting CEO), Beth
Sorensen (VP Emerging Music Technology), Chris Anderson (Project Manager),
Justin Phillips (Senior Product Manager), Carol Spenillo (Marketing Manager),
Jonathan Tschiggfrie (Product Documentation), Fred Flowerday (QA), Erin Vork
(Product Specialist and Documentation), Mark Adler (documentation support),
Barry Brown (SVP Marketing and Product Management), Jim Bruce (Customer
Support and Facilities Manager), Paul Carlson (CTO), Ryan Demlow (support
74 User’s Guide to Garritan Harps
file development), Hailey Dillon (Marketing Director), Chris Fischer (Inventory
Analyst), Allen Fisher (Installers), Tim Fitzpatrick (Business Systems Manager),
Yvonne Grover (QA Manager), Kyle Imbertson (QA and support file development),
Scott Menk (Art Director), Jeff Nordquist (Notation Engineering Manager), David
Olson (Business Systems), Joy Parker (Business Systems), Gary Pederson
(Installers), Lori Schug (Corporate Controller), Chris Young (QA), and the rest of
the MakeMusic team for all their help and invaluable assistance.
And to Marianne, who continually inspires me and tugs on my heart strings.
User’s Guide to Garritan Harps 75
THE GARRITAN COMMUNITY
LEARN, SHARE MUSIC, AND STAY UP TO DATE
We invite you to join the Garritan Community!
Owning Garritan Harps gives you much more than just a product. One of the
most valuable benefits is membership in the Garritan community of musicians.
The Garritan Forum is where Garritan users from around the world come to
discuss everything related to soundware and music. It’s the perfect way to
find the latest news and announcements, ask questions, and share your music
created with Garritan libraries. If you want to browse, share your music, share
your thoughts about the sounds, impart knowledge, listen to demos, learn, and
interact with other users—this is the place! You can also communicate privately
with other musicians, respond to polls, participate in real-time chats, read how-to
tutorials, and get support and help from others. There is a wealth of information
among the tens of thousands of posts in the forum and a convenient search
feature to find exactly what you are looking for.
The Garritan forum can be accessed at: www.garritan.com/forum.
You do not have to register to browse posts, but before you can post, you need
to sign up. Registration is fast, simple, and absolutely free, so please join our
community today! In addition to the official Garritan Forum, there are other
independent Garritan communities where you can find valuable information and
interact with other users. I urge you to contribute and be a part of the Garritan
Community, where you will find an indispensable resource for musicians.
76 User’s Guide to Garritan Harps
ADDITIONAL GARRITAN SOUND LIBRARIES
GET MORE SOUNDS INSTANTLY AND EASILY
Download sounds quickly and easily to expand your musical palette. Simply go
to the Settings window in the ARIA Player and click on the “Get More Sounds”
button. You’ll be taken to the Garritan Products Store, where you can purchase
additional downloadable sound libraries.
For information on all current Garritan libraries and upcoming products, visit our
website at www.garritan.com.
MORE PRODUCTS FROM GARRITAN
Personal Orchestra
Jazz & Big Band
Concert & Marching Band
World Instruments
Instant Orchestra
Classic Pipe Organs
User’s Guide to Garritan Harps 77
Loading...