Garrett 1166050, Pro-Pointer II User guide
FEATURES
ON/OFF Button
Pinpointing Tip
360° Side-Scan Area
Exclusive Scraping Blade
LED Flashlight
Speaker
Lanyard Attachment Loop
Sealed Battery Cover
Powering On
Press and release the button () while holding the detector away from any
metallic objects. You will hear 2 beeps and the LED () will remain on.
Powering Off
Press and release the button to power off. The unit emits a single beep during
its power down.
LED Light
The white LED will remain illuminated while the unit is on, providing poweron indication and acting as a flashlight when needed.
Lost Pinpointer Alarm
After 5 minutes of being ON without a button press, the Pro-Pointer II will
begin emitting progressively faster warning chirps for 60 minutes. Press the
power button off and back on to reset.
Auto-Off Feature
After one hour of warning chirps, the Pro-Pointer II will power off automatically.
Scraping Blade
This rugged edge is ideal for sifting through dirt while searching for the target.
The Pro-Pointer II’s 360º-side-scan detection allows the detector to alarm
when the unit is passed in close proximity to a metallic target.
2
3
Loading...