nüvi
®
3490 for Volvo
®
Cars
quick start manual
March 2012 190-01475-01_0A Printed in Taiwan
Getting Started
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Setting Up Your Device
When using your Volvo® device for the rst time,
complete the following tasks.
Powering the device (page 2).
1
Mount the device (page 3).
2
Register the device (page 3).
3
Check for updates.
4
• Software updates (page 3).
• Free map update (page 4).
Download the full owner’s manual (page 4).
5
2 nüvi 3490 for Volvo Cars Quick Start Manual
WARNING
Powering the Device
WARNING
This product contains a lithium-ion battery.
To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
vehicle when exiting or store it out of direct
sunlight.
Connect your device to the vehicle mount.
Your device charges as you drive.
Power Connection
Your device can be powered three ways.
• Vehicle mount
• USB micro-B cable
• AC adapter
If you do not plan to use your device while it is
connected to a power source, press the Power
key to lock the device (page 4).
Connecting the Device to Vehicle
Power
Fit the bottom ➊ of your device into the
1
cradle.
➋
➊
Tilt your device back ➋ until it snaps into
2
place.
Your device should turn on automatically if
the vehicle is running.
Follow the on-screen instructions.
3
nüvi 3490 for Volvo Cars Quick Start Manual 3
About myDashboard
You can use myDashboard to register your
device, check for software and map updates,
access product manuals and support, and more.
Setting Up myDashboard
Connect the micro-USB cable to the micro-
1
USB port on the device.
Connect the micro-USB cable to the USB
2
port on your computer.
Go to www.garmin.com/volvo.
3
Select myGarmin.
4
Follow the on-screen instructions.
5
Registering your Device
From myDashboard, click Register Now.
1
Follow the on-screen instructions.
2
Keep the original sales receipt, or a
3
photocopy, in a safe place.