Garmin nuvi 3490LT, NA, nuvi 3490LT, Europe, nuvi 3490LMT, nuvi 3490LMT, Europe, nuvi 3490LMDT UK User Manual

®

nüvi

3400 series

quick start manual

n

üvi models: 3410, 3450, 3460 3490

July 2011 190-01357-01_0A Printed in Taiwan

Getting Started

See the Important Safety and Product

Information guide in the product box for product

warnings and other important information.

Setting Up Your Device

When using your device for the rst time,
complete the following tasks.

Connect the device to vehicle power

1

(page 2).
Mount the device (page 2).

2

Register the device (page 3).

3

Check for updates.

4

• Software updates (page 3).

• Free map update (page 4).
Download the full owner’s manual (page 4).

5

2 nüvi 3400 Series Quick Start Manual

 WARNING

Connecting the Device to Vehicle
Power

This product contains a lithium-ion battery.
To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
vehicle when exiting or store it out of direct
sunlight.

Before mounting the device, see the Important
Safety and Product Information guide for
information about laws pertaining to windshield
mounting.

Charge your device before using it on battery
power.

Plug the vehicle power cable ➊ into the

1

USB port on the mount

 WARNING

Notice

➋.

About myDashboard

➌
➋

➊

Snap the mount ➌ onto the suction cup ➍.

2

Press the suction cup to the windshield.

3

While pressing, ip the lever ➎ back toward

4

the windshield.
Fit the bottom of your device ➏ into the

5

mount.
Tilt your device back until it snaps into place.

6

Plug the other end of the vehicle power

7

cable into a power outlet in your vehicle.
If necessary, connect the external antenna

8

to the trafc receiver and secure it to the
windshield using the suction cups.

nüvi 3400 Series Quick Start Manual 3

➏

➍

➎

You can use myDashboard to register your
device, check for software and map updates,
access product manuals and support, and more.

Setting Up myDashboard

Connect the micro-USB cable to the micro-

1

USB port on the device (page 2).
Connect the micro-USB cable to the USB

2

port on your computer.
Go to www.garmin.com/dashboard.

3

Follow the on-screen instructions.

4

Registering your Device

From myDashboard, click Register Now.

1

Follow the on-screen instructions.

2

Keep the original sales receipt, or a

3

photocopy, in a safe place.