All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent
of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual
without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current
updates and supplemental information concerning the use of this product.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products
and to make changes in the content without obligation to notify any person or organization of such changes or improvements.
Go to the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and
operation of this and other Garmin products.
®
Garmin
, the Garmin logo, nüvi®, and MapSource® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA
and other countries. cityXplorer
™
, ecoRoute™, nüMaps Guarantee™, myGarmin™, and trafcTrends™, and BaseCamp™ are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
The Bluetooth
license. Windows
trademark of Apple Computer, Inc. microSD
®
word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under
®
is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac® is a
™
is a trademark of SD-3C, LLC. Android is a trademark of Google Inc.”
.
Table of Contents
Getting Started �������������������������������������������� 5
Connecting the Device to Vehicle Power .............. 5
About myDashboard ............................................. 5
Adjusting the Screen Brightness .......................... 6
Adjusting the Master Volume ................................ 6
Status Bar Icons ................................................... 6
Power Cables ..................................................... 39
Caring for Your Device ........................................ 39
4 nüvi 2585TV Owner’s Manual
Getting Started
Tilt your device back until it snaps into place.
6
See the Important Safety and Product Information
guide in the product box for product warnings and
other important information.
Mount the device (page 5).
1
Register the device (page 6).
2
Check for updates.
3
• Software updates (page 6).
• Free map update (page 6).
Connecting the Device to Vehicle
WARNING
➍
➋
➊
Plug the other end of the vehicle power cable
7
into a power outlet in your vehicle.
If necessary, connect the external antenna
8
to the trafc receiver and secure it to the
windshield using the suction cups.
➌
Power
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme
heat, remove the device from the vehicle when
exiting or store it out of direct sunlight.
Before you use your device on battery power, you
should charge it.
Plug the vehicle power cable ➊ into the USB
1
port on the mount
Snap the mount onto the suction cup ➌.
2
Press the suction cup to the windshield.
3
While pressing, ip the lever ➍ back toward
4
the windshield.
Fit the bottom of your device into the mount.
5
nüvi 2585TV Owner’s Manual 5
WARNING
➋.
About myDashboard
Use myDashboard to register your device, check
for software and map updates, access product
manuals and support, and more.
Setting Up myDashboard
Connect the USB cable➊to the USB port on
1
the device
➋.
➋
➊
Connect the USB cable to the USB port on
2
your computer.
Go to www.garmin.com/dashboard.
3
Follow the on-screen instructions.
4
Registering the Device
From myDashboard, click Register Now.
1
Follow the on-screen instructions.
2
Updating the Software
Open myDashboard (page 5).
1
Under Software Updates, click Update Now.
2
Follow the on-screen instructions.
3
nüMaps Guarantee
To receive one free map update (if available),
register your device at http://my.garmin.com within
90 days of acquiring satellites while driving with
your device. You are not eligible for the free map
update if you register by phone or wait longer
than 90 days after the rst time you acquire
satellites while driving with your device. For more
information, go to www.garmin.com/numaps.
™
Updating Maps
Open myDashboard (page 5).
1
Register the device (page 6).
2
Under Map Updates, click Update Now.
3
If a free map update is no longer available,
click Buy Now.
Follow the on-screen instructions.
4
Adjusting the Screen Brightness
Select Settings > Display > Brightness.
1
Use the slider bar to adjust the brightness.
2
Adjusting the Master Volume
Select Volume.
1
Select an option:
2
• Use the slider bar to adjust the volume.
• Select
• Select
slider bars to adjust the volume for
navigation prompts, phone, and media.
to mute the device.
> Audio Mixer and use the
Status Bar Icons
The status bar is located at the top of the main
menu. The status bar icons display information
about features on the device. You can select
some icons to change settings or view additional
information.
GPS signal status.
Bluetooth® technology status (appears
when connected to a compatible device).
Transportation mode indicator.
Current time.
Battery status.
Satellite Signals
After the device is turned on, it begins acquiring
satellite signals. The device may need a clear
view of the sky to acquire satellite signals. When
6 nüvi 2585TV Owner’s Manual
at least one of the bars is green, your device
has acquired satellite signals.
battery and then fully charge it. Do not unplug the
device until it is fully charged.
Viewing GPS Satellite Signals
For more information about GPS, go to
www.garmin.com/aboutGPS.
Hold
for 10 seconds.
Transportation Modes
Automobile mode
Pedestrian mode
Using the On-screen Buttons
• Select to return to the main menu.
• Hold
• Select
• Hold
• Select
to quickly return to the main menu.
or to see more choices.
or to scroll faster.
to see a menu of options for the
current screen.
Using the On-screen Keyboard
Routing and navigation are calculated differently
based on your transportation mode.
For example, in Automobile mode, the estimated
time of arrival is calculated using the speed
limit of the roads on the route. Pedestrian mode
calculates time of arrival based on walking speed.
NOTE: Pedestrian routes do not include highways.
If you have cityXplorer
device, pedestrian routes may include public
transit (page 20).
Select
™
maps loaded on your
.
Battery Information
After the device is connected to power, it begins
to charge.
in the status bar indicates the status of the
internal battery. To increase the accuracy of the
battery gauge, you should fully discharge the
nüvi 2585TV Owner’s Manual 7
See Language and Keyboard Settings to change
the keyboard layout (page 38). Select a character
on the keyboard to enter a letter or number.
• Select
• Hold
• Select
• Select
mode.
• Select
as punctuation marks.
• Select
to add a space.
to delete a character.
to erase the entire entry.
to select the keyboard language
to enter special characters, such
to change character capitalization.
About Shortcuts
You can add shortcuts to the Where To? menu. A
shortcut can point to a location, a category, or a
search tool.
Adding a Shortcut Icon
The Where To? menu can contain up to 36
shortcut icons.
Select Where To? > Add Shortcut.
1
Select an item.
2
Removing a Shortcut
Select Where To > > Remove
1
Shortcut(s).
Select the shortcut to remove.
2
Select the shortcut again to conrm.
3
Finding Locations
The device offers many methods for nding
locations.
• By category (page 8)
• Near another location (page 9)
• By spelling the name (page 10)
• By address (page 10)
• Using recently found locations (page 12)
• Using coordinates (page 10)
• Using the map (page 11)
• Using saved locations (page 12)
About Locations
The detailed maps loaded in your device contain
locations, such as restaurants, hotels, and auto
services. You can use categories to browse for
nearby businesses and attractions.
8 nüvi 2585TV Owner’s Manual
Finding a Location by Category
Select Where To?.
1
Select a category, or select Categories.
2
If necessary, select a subcategory.
3
Select a location.
4
To narrow your search results, you can search
within some categories.
Select Where To?.
1
Select a category, or select Categories.
2
If necessary, select a subcategory.
3
If necessary, enter all or part of the name in
4
the search bar (page 8).
Finding a Location Using the Search Bar
You can use the search bar to search for locations
by entering a category, brand name, address, or
city name.
Select Where To?.
1
Select the search bar ➊.
2
➊
Enter a search term.
3
Suggested search terms appear below the
search bar as you type.
Select an option:
4
• To search for a type of business, enter a
category name, such as “movie theaters.”
• To search for a business by name, enter all
or part of the name.
• To search for an address near you, enter
the street number and street name.
• To search for an address in another city,
enter the street number, street name, city,
and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude
and longitude coordinates.
Select an option:
5
• To search using a suggested search term,
select the term.
• To search using the text you entered,
select
If necessary, select a location.
6
.
Changing the Search Area
By default, your device nds locations closest to
your current location. You can nd a location near
another city or location.
Select Where To? > Searching Near.
1
Select an option.
2
If necessary, select a location.
3
Reporting a Closed or Missing Location
If your search results include an outdated or
incorrect location, you can report the error to
Garmin and remove the location from future
searches.
Search for a location (page 8).
1
From the search results, select a location.
2
Select .
3
Select > Edit.
4
Select Report as Closed or Report as
5
Missing.
This information is sent to Garmin when you
connect your device to myGarmin using your
computer.
Editing Location Information
You can change the address or phone number for
a location that appears in the search results.
Search for a location.
1
From the search results, select a location.
2
Select .
3
Select > Edit.
4
Select Address or Phone Number, and enter
5
the new information.
Rating a Point of Interest
You can assign a star rating to a point of interest.
Search for a location.
1
From the search results, select a location.
2
Select .
3
Select the stars to rate the point of interest.
4
The star rating updates on your device.
nüvi 2585TV Owner’s Manual 9
About Search Tools
You can search for locations by using the onscreen keyboard or by entering the location’s
address or coordinates.
Finding an Address
Before you can nd an address, you must add a
shortcut to the address search tool (page 8).
NOTE: The order of the steps may change
depending on the map data loaded on your device.
Select Where To? > Address.
1
Enter the address number, and select Done.
2
Enter the street name, and select Next.
3
If necessary, select Searching In to change
4
the city, state, or province.
If necessary, select the city, the state, or the
5
province.
If necessary, select the address.
6
Finding a City
Before you can nd a city, you must add the city
search tool to the Where To? menu (page 8).
Select Where To? > Categories > Cities.
1
Select Enter Search.
2
Enter a city name, and select .
3
Select a city.
4
Finding an Intersection
Before you can nd an intersection, you must add
a shortcut to the intersection search tool (page 8).
Select Where To? > Categories >
1
Intersections.
Select a state or province.
2
NOTE: If necessary, select State or Country
to change the country, state, or province.
Enter the rst street name, and select Next.
3
If necessary, select the street.
4
Enter the second street name, and select
5
Next.
If necessary, select the street.
6
If necessary, select the intersection.
7
Finding a Location Using Coordinates
Before you can nd a location using coordinates,
you must add a shortcut to the coordinates search
tool (page 8).
You can nd a location using latitude and longitude
coordinates. This can be helpful when geocaching.
Select Where To? > Categories >
1
Coordinates.
If necessary, select > Format, select the
2
correct coordinate format for the type of map
you are using, and select Save.
Select the latitude coordinate.
3
Enter the new coordinate, and select Done.
4
Select the longitude coordinate.
5
Enter the new coordinate, and select Done.
6
Select View on Map.
7
10 nüvi 2585TV Owner’s Manual
Finding a Location by Browsing the Map
Before you can nd places included in the map
data, such as restaurants, hospitals, and fuel
stations, you must enable the map layer for places
along the road (page 17).
Select View Map.
1
Drag and zoom the map to display the area to
2
search.
If necessary, select , and select a category
3
icon to view only a specic category of places.
Location markers (
the map.
Select an option:
4
• Select a location marker.
• Select a point, such as a street,
intersection, or address location.
If necessary, select the location description to
5
view additional information.
or a blue dot) appear on
Searching within a Category
After you have performed a search for a point of
interest, certain categories may display a Quick
Search list that displays the last four destinations
you selected.
Select Where To?.
1
Select a category, or select Categories.
2
If applicable, select a destination from the
3
Quick Search list.
➊
If necessary, select the appropriate destination.
4
Saving a Home Location
You can set your home location for the location
you return to most often.
Select Where To? > > Set Home
1
Location.
Select Enter My Address, Use My Current
2
Location, or Recently Found.
The location is saved as “Home” in the Saved
folder (page 12).
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
Select Where To? > Saved > Home.
1
Select > Edit.
2
Enter your changes.
3
Select Done.
4
nüvi 2585TV Owner’s Manual 11
Finding Recently Found Places
Your device stores the last 50 locations you have
found.
Select Where To? > Recent.
1
Select a location.
2
Clearing the List of Recently Found Places
Select Where To? > Recent > > Clear >
Yes.
Finding Parking
Select Where To? > Categories > Parking.
1
Select a parking location.
2
Setting a Simulated Location
If you are indoors or not receiving satellite signals,
you can use the GPS to set a simulated location.
Select Settings > Navigation.
1
Select GPS Simulator.
2
Select View Map.
3
Select an area on the map.
4
The address of the location appears at the
bottom of the screen.
Select the location description.
5
Select Set Location.
6
Saving Locations
You can save locations so you can quickly nd
them and create routes to them.
Saving a Location
Search for a location (page 8).
1
From the search results, select a location.
2
Select .
3
Select > Save.
4
If necessary, enter a name, and select Done.
5
Saving Your Current Location
From the map, select the vehicle icon.
1
Select Save.
2
Enter a name, and select Done.
3
Select OK.
4
Starting a Route to a Saved Location
Select Where To? > Saved.
1
If necessary, select a category, or select All
2
Saved Places.
Select a location.
3
Select Go!�
4
Editing a Saved Location
Select Where To? > Saved.
1
If necessary, select a category.
2
Select a location.
3
Select .
4
Select > Edit.
5
Select an option:
6
• Select Name.
• Select Phone Number.
12 nüvi 2585TV Owner’s Manual
• To assign categories to the Favorite, select
Categories.
• To save a photo with the Favorite, select
Assign Photo (page 28).
• To change the symbol used to mark the
Favorite on a map, select Change Map Symbol.
Edit the information.
7
Select Done.
8
Assigning Categories to a Saved Location
You can add custom categories to organize your
saved locations.
NOTE: Categories appear in the saved locations
menu after you have saved more than 12
locations.
Select Where To? > Saved.
1
Select a location.
2
Select .
3
Select > Edit > Categories.
4
Enter one or more category names, separated
5
by commas.
If necessary, select a suggested category.
6
Select Done.
7
Sharing a Saved Location
If you save the location of a business that is not
in the map data, you can share the location with
Garmin so that it can be added to future map
updates and shared with the Garmin community.
Select Where To? > Saved.
1
nüvi 2585TV Owner’s Manual 13
If necessary, select a category.
2
Select a location.
3
Select .
4
Select Share Place.
5
Enter one or more categories that apply to the
6
location, and select Done.
Select Share.
7
This information is sent to Garmin when you
connect your device to myDashboard using your
computer (page 5).
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
Select Where To? > Saved.
1
Select > Delete Saved Places.
2
Select the box next to the saved locations to
3
delete, and select Delete.
Navigation
Starting a Route
Search for a location (page 8).
1
Select a location.
2
Select Go!.
3
If necessary, select an option.
4
• Select Drive.
• Select Walk.
• Select Public Transit to calculate a route
that combines public transit and walking.
NOTE: You must have cityXplorer
loaded to navigate using public transit
(page 20).
If necessary, select a route.
5
™
maps
Previewing Multiple Routes
Search for a location (page 8).
1
From the search results, select a location.
2
Select Routes.
3
Use the on-screen buttons to select a route.
4
Select Go!.
5
Automobile Routes
The route is marked with a magenta line. A
checkered ag marks your destination.
As you travel, the device guides you to the
destination with voice prompts, arrows on the map,
and directions at the top of the map. If you depart
from the original route, the device recalculates the
route and provides new directions.
If the zoom controls are hidden, select the map
2
to display the zoom controls.
Select the map to switch to browsing mode.
3
Map buttons appear.
Select an option:
4
• To zoom in or out, select
• To rotate the map view, select
• To switch between North Up and 3-D
views, select
• To add or remove map layers, select
• To view specic location categories, select
and select a category icon.
• To center the map on your current location,
select
• To view shortcuts for map and navigation
features, select
.
.
.
or .
.
Adding a Point to a Route
Before you can add a stop to a route, you must be
navigating a route in Automobile mode.
While navigating a route, select to return to
1
the main menu.
Select Where To?.
2
Search for the location (page 8).
3
Select Go!.
4
Select Add to Active Route.
5
.
Using the Navigation Map
From the main menu, select View Map.
1
14 nüvi 2585TV Owner’s Manual
Taking a Detour
While navigating a route, you can use detours
to avoid obstacles ahead of you, such as
construction zones.
NOTE: If the route you are currently navigating is
the only reasonable option, your device might not
calculate a detour.
From the map, select
> Detour.
Stopping the Route
From the map, select .
Updating Speed Limits
The speed limit icon feature is for information only
and does not replace the driver’s responsibility to
abide by all posted speed limit signs and to use
safe driving judgment at all times. Garmin will not
be responsible for any trafc nes or citations that
you may receive for failing to follow all applicable
trafc laws and signs.
An icon displaying the current speed limit may
appear as you travel on major roadways.
From the map, select > Set Speed Limit.
1
Select and to set the speed
2
limit.
About Exit Services
While you navigate a route, you can nd petrol,
food, lodging, and toilets near upcoming exits.
Services are listed under tabs by category.
Petrol
Food
Lodging
Toilets
Finding Exit Services
From the map, select > Exit Services.
1
Use the arrows to select an upcoming exit.
2
Select an exit service tab.
3
Select a point of interest.
4
Navigating to an Exit
From the map, select > Exit Services >
1
�
Select Go!.
2
Avoiding Road Features
Select Settings > Navigation > Avoidances.
1
Select the road features to avoid on your
2
routes, and select Save.
Avoiding Transit Types
NOTE: Transit types are available when
cityXplorer maps are loaded (page 20).
Select Settings > Navigation > Public
1
Transit.
Select the transit type to avoid on your routes.
2
Select Save.
3
nüvi 2585TV Owner’s Manual 15
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.