Garmin 03393 Operating Manual

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. and Garmin Canine™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license.

Table of Contents

Getting Started............................ 1

Charging the Dog Collar Device.......... 1

Turning On the Dog Collar Device....... 2

Attaching the Dog Collar Device to a

Collar Strap.......................................... 2

Pairing Your Smartphone with the Dog

Collar Device....................................... 3

Fitting the Collar on Your Dog............. 3

Garmin Canine............................. 4

Syncing the Dog Collar Device with the

Garmin Canine App............................. 5

Bark Correction........................... 5

Selecting a Training Mode................... 6

Status LED Indicator............................ 7

Correction Methods............................. 7

Automatic Intensity.............................. 7

Choosing the Correct Intensity

Level.................................................... 8

Troubleshooting.......................... 8

The bark detection is too sensitive...... 8

My dog collar device is not

responding........................................... 8

My device does not seem to be

active................................................... 9

My device is not charging or does not

hold a charge....................................... 9

My dog is still barking.......................... 9

My dog is barking too much............... 10

Device Information.................... 10

Specifications.................................... 10

Sleep Mode....................................... 11

Instructions........................................ 11

Getting More Information................... 12

Third-Party Software License

Agreement......................................... 12

Index........................................... 14

Table of Contents i

Device Overview........... 1

Battery Replacement

Plug the power cable into a power source.

The color and number of lit status LED indicators change as the collar charges. All the status LED indicators turn solid green when the device is fully charged.

After all the status LED indicators turn solid green, remove the USB cord from the device.

NOTE: The device turns on automatically when you remove it from the charger.

Turning On the Dog Collar Device

The device remains on until you turn the device off manually

(page 2)

TIP: The device does not issue corrections for two minutes after any button press, or after the device is removed from the charger.

Hold the power key until all of the status LED indicators turn green.

The device beeps, and an LED indicates the active mode. An LED turns blue when the smart mode is active. An LED turns green when any other mode is active. After two

seconds, a blue or green LED turns red.

Turning Off the Dog Collar Device

Hold the power key until the status LED turns solid red and the device beeps.

Attaching the Dog Collar Device to a Collar Strap

You can attach the dog collar device to a collar strap that is a maximum of 25.4 mm wide (1 in.) and 2.78 mm thick (0.11 in.).

With the buckle facing outward, insert the end of the collar strap À

through

the slot Á on the collar device.

2 Getting Started

+ 14 hidden pages