Garlock 3000 User Manual

GARLOCK
an EnPro Industries family of companies
1666 Division Street
Palmyra, NY 14522

Tel: 1-877-GARLOCK / 315.597.4811
Fax: [phone]
www.garlock.com

BLUE-GARD® Style 3000

MATERIAL PROPERTIES*:

Color:

Blue

Composition:

Aramid fibers with a nitrile binder

Fluid Services (see chemical resistance guide):

Water, aliphatic hydrocarbons, oils and gasoline

Temperature1, °F (°C)

Minimum:

-100 (-73)

Continuous Max:

+400 (+205)

Maximum:

+700 (+371)

Pressure1, Maximum, psig (bar):

1000 (70)

P x T (max.)1, psig x °F (bar x °C):

1/32 and 1/16”:

350,000 (12,000)

1/8”

250,000 (8,600)

Meets Specifications:

ABS (American Bureau of Shipping) and BS 7531 Grade Y

TYPICAL PHYSICAL PROPERTIES*:

ASTM F36

Compressibility , average, %:

8

ASTM F36

Recovery, %:

50

ASTM F38

Creep Relaxation, %:

21

ASTM F152

Tensile, Across Grain, psi (N/mm2):

2150 (15)

ASTM F1315

Density, lbs./ft.3 (grams/cm3):

100 (1.60)

ASTM F433

Thermal Conductivity (K), W/m°K (Btu.·in./hr.·ft.

2

·°F):

0.29-0.38 (2.00-2.65)

ASTM D149

Dielectric Properties, range, volts/mil.

Sample conditioning

1/16”

1/8”

3 hours at 250oF

396

(2)

-832

257

(2)

-363

96 hours at 100% Relative Humidity:

271

142

ASTM F586

Design Factors

1/16” & Under

1/8”

"m" factor:

4.2

5.2

"y" factor, psi (N/mm2):

3050 (21.0)

4400 (30.3)

SEALING CHARACTERISTICS*

ASTM F37B – Fuel A

ASTM F37B - Nitrogen

DIN 3535 – Nitrogen

Gasket Load, psi (N/mm2):

500 (3.5)

3000 (20.7)

4640 (32)

Internal Pressure, psig (bar):

9.8 (0.7)

30 (2)

580 (40)

Leakage

0.2 ml/hr.

0.6 ml/hr.

0.05 cc/min

Notes:

* This is a general guide and should not be the sole means of selecting or rejecting this material. ASTM test results in accordance with ASTM F-104; properties

1

Based on ANSI RF flanges at our preferred torque. When approaching maximum pressure, continuous operating temperature, minimum temperature or 50% of

maximum PxT, consult Garlock Applications Engineering. Minimum temperature rating is conservative.

2

Indicates electric current arced around and not through the gasket. Dielectric strength is higher than indicated.

REV: 10/11/2016

Ring

Bolt Hole

Bolt Hole

24

24.00

28.25

32.00

29.50201.38

Series A

Bolt Hole

Bolt Hole

60

60.00

67.50

73.00

69.25521.88

Series B

Bolt Hole

Bolt Hole

60

60.00

64.19

67.94

65.44521.38

Full Face

ASME B16.21* Non-metallic Gasket Dimensions for

ASME B16.5 & B16.47 - 150# Flanges

Pipe Size

Gasket

0.5 0.84 1.88 3.50 2.38 4 0.63

0.75 1.06 2.25 3.88 2.75 4 0.63
1 1.31 2.62 4.25 3.13 4 0.63

1.25 1.66 3.00 4.63 3.50 4 0.63

1.5 1.91 3.38 5.00 3.88 4 0.63
2 2.38 4.12 6.00 4.75 4 0.75

2.5 2.88 4.88 7.00 5.50 4 0.75
3 3.50 5.38 7.50 6.00 4 0.75

3.5 4.00 6.38 8.50 7.00 8 0.75
4 4.50 6.88 9.00 7.50 8 0.75
5 5.56 7.75 10.00 8.50 8 0.88
6 6.62 8.75 11.00 9.50 8 0.88
8 8.62 11.00 13.50 11.75 8 0.88

10 10.75 13.38 16.00 14.25 12 1.00
12 12.75 16.13 19.00 17.00 12 1.00
14 14.00 17.75 21.00 18.75 12 1.13
16 16.00 20.25 23.50 21.25 16 1.13
18 18.00 21.62 25.00 22.75 16 1.25
20 20.00 23.88 27.50 25.00 20 1.25

Gasket

Pipe Size

26 26.00 30.50 34.25 31.75 24 1.38
28 28.00 32.75 36.50 34.00 28 1.38
30 30.00 34.75 38.75 36.00 28 1.38
32 32.00 37.00 41.75 38.50 28 1.63
34 34.00 39.00 43.75 40.50 32 1.63
36 36.00 41.25 46.00 42.75 32 1.63
38 38.00 43.75 48.75 45.25 32 1.63
40 40.00 45.75 50.75 47.25 36 1.63
42 42.00 48.00 53.00 49.50 36 1.63
44 44.00 50.25 55.25 51.75 40 1.63
46 46.00 52.25 57.25 53.75 40 1.63
48 48.00 54.50 59.50 56.00 44 1.63
50 50.00 56.50 61.75 58.25 44 1.88
52 52.00 58.75 64.00 60.50 44 1.88
54 54.00 61.00 66.25 62.75 44 1.88
56 56.00 63.25 68.75 65.00 48 1.88
58 58.00 65.50 71.00 67.25 48 1.88

I.D.

I.D.

Gasket

O.D.

Ring

Gasket

O.D.

Gasket

O.D.

Gasket

O.D.

Bolt

Circle

Full Face*

Bolt

Circle

Qty.

Qty.

Dia.

Dia.

* ASME B16.21 doesnot provide full facedimensions for ASME B16.47 - 150# flanges.

Ring

Pipe Size

Gasket

26 26.00 28.56 30.94 29.31 36 0.88
28 28.00 30.56 32.94 31.31 40 0.88
30 30.00 32.56 34.94 33.31 44 0.88
32 32.00 34.69 37.06 35.44 48 0.88
34 34.00 36.81 39.56 37.69 40 1.00
36 36.00 38.88 41.62 39.75 44 1.00
38 38.00 41.12 44.25 42.12 40 1.12
40 40.00 43.12 46.25 44.12 44 1.12
42 42.00 45.12 48.25 46.12 48 1.12
44 44.00 47.12 50.25 48.12 52 1.12
46 46.00 49.44 52.81 50.56 40 1.25
48 48.00 51.44 54.81 52.56 44 1.25
50 50.00 53.44 56.81 54.56 48 1.25
52 52.00 55.44 58.81 56.56 52 1.25
54 54.00 57.62 61 58.75 56 1.25
56 56.00 59.62 63 60.75 60 1.25
58 58.00 62.19 65.94 63.44 48 1.38

* ASME B16.21 does not provide full face dimensions for ASME B16.47 - 150# flanges.

I.D.

Gasket

O.D.

Gasket

O.D.

Full Face*

Bolt

Circle

Qty.

Dia.