S684 Sentry Series
Electric Restaurant Range
Models:
S684 SU684 SS684
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
S684 Sentry Series Electric Restaurant Range
Model S684
NOTE: Ranges supplied with casters must
be installed with an approved restraining
device.
Standard Features:
• Stainless steel exterior
• 2 large, full size ovens with
complete porcelain interior finish
• Removable, 4 position, oven rack
guides with one oven rack per oven
• Electro‑mechanical heav y duty
oven thermostat, (150°F/66°C ‑
550°F/288°C)
• 10 tubular heating elements,
infinite switch controlled
• Cool touch oven door handle
• 10" (254mm) high stainless steel
backguard with slotted black
enameled angled cap
• 6" (152mm) high stainless steel
adjustable legs
• 6 sealed, high performance
elements with over heat
protection and 6‑heat switch
in lieu of tublar elements, CE
approved model SU684, or North
American Model SS684
• 1 Year limited warranty on parts &
labor (USA & Canada only)
Optional Features:
Convection oven(s), (add suffix ‑RC
for sgl., or ‑RC2 for dbl.) Each
convection oven comes standard
with 3 oven rack s
5/8" (16mm) thick thermostatically
controlled griddle plate available
in 12", add suffix 12G, 24" add
suffix 24G and 36", add suffix 36G,
standard on the right, left optional
Solid Steel Hot top 1/2" (13mm)
thick utilizing font and rear switch
controls, available in 12", add
suff ix 1, 24" add suf fix 2, and 36",
add suffix 3, standard on the left,
right optional (Note: Maximum (3)
three hot top sections per range.)
Additional Oven Rack
Swivel casters with front brakes
17" (432 mm) high stainless steel
backgaurd with slotted black
enameled angled cap
Stainless steel two piece easy to
assemble backguard and plate
shelf
Range mounted salamander
broiler (Model SER‑680). CE
Marked range mounted
salamander is SUER‑680. Specify
right or left side, 24"wide
high‑shelf included.
Marine equipment ‑ storm rails
for pots, oven door latch, drip tray
stop and deck fasteners
Specifications:
Electric medium duty range with 2 full‑size ovens, all por‑
celain oven interior, contoured front stainless steel plate
rail, 60" (1524mm) wide, with 10 all purpose tubular heat‑
ing elements. Stainless steel exterior, with stainless steel
10" (254mm) high backguard with slotted black enameled
angled cap. Available with optional sealed elements with
"over heat protection" – reducing power if element is
turned on w/o pan for 8 minutes, hot top(s) and griddle.
Available with convection oven base(s).
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Note: Only models with prefix “SU” carry the CE Mark
S684 Sentry Series Electric Restaurant Range
Model
Total Kw
Load
208V/1Ph 208V/3 Ph 240V/1Ph 240V/3 Ph 400 V/3N 415V/3N
Nominal Amps
S684* 27 127 76 110 66 — —
SS/SU684** 33 157 97 136 84 60 58
SS/SU684RC2*** 34 164 100 142 87 60 58
Salamander Broiler**** 7 N/A***** 23 29 20 4 4
*(All purpose tubular elements) * *(Sealed ‑top elements, Model # SS684 in North America) * ** Maximum on any 684 series range.
*** *Add when wired to range base (SER/SUER‑680) * *** *Note: For 208V/1phase the salamander cannot be wired into the range.
Exterior Dimensions Oven Interior Dimensions
Height Width Depth
†
Height Width Depth
47" (1194mm) 60" (1524mm) 34‑1/4" (870mm) 13‑1/2" (343mm) 26‑1/4” (667mm) 22" (559mm)
† With Front Rail Note: Shipping Cubic Feet is 84.5.
Ratings:
Tubular Elements ‑ Small 6‑1/2" (165mm) ‑ 1250 Watts. Large 8‑1/2" (216mm) ‑ 2100 Watts
Sealed Elements ‑ Small 7‑1/2” (191mm) ‑ 2000 Watts. Large 9” (229mm) ‑ 2600 Watts
Hot Plate ‑ (per 12"/305mm section) ‑ Front and Rear sections each 1675 Watts, (3350 Watts total)
Griddle ‑ (per 12"/305mm section) ‑ 3350 Watts
Standard Oven ‑ 4.85 kW
Convection Oven ‑ 5.0 kW (plus 0.5kW fan motor, for 5.5kW total)
NOTE: Many local codes exist, and it is the responsibility of the Owner
and the Installer to comply with those codes.
7-1/2"
[190mm]
34-1/4"
[870mm]
REAR CABLE
ENTRANCE
3-1/2"
[829mm]
24-1/2"
[622mm]
[152mm]
6"
Installation
Clearances:
Range w/o
Salamander
Range w/
Salamander
Side Back
3” (76mm) 2” (51mm)
7” (178mm) 2” (51mm)
Hot Plate 10” (254mm) —
NOTE: For ranges with convection oven(s), (models
with sux `RC’ or `RC2’), air circulation is required for
proper operation of fan motors. These models must
not be dais mounted or installed without legs.
13-5/8"
[346mm]
41"
[1041mm]
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
[235mm]
31-3/4"
[806mm]
60"
[1524mm]
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
[152mm]
9-1/4"
6"
15-1/4"
[387mm]
OPTIONAL
HIGH SHELF
REAR CABLE
ENTRANCE
[737mm]
57-5/8"
[1465mm]
4-3/4"
[121 mm]
W/OPTIONAL
RC MOTOR
3"
[76mm]
29"
Form# S684 (10/18/11)