Garland M35SS User Manual
Master Series
Heavy Duty Gas Fryer
Models:
M35SS
Item: M35SS
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Master Series Heavy Duty Gas Fryer
17" Gas Fryer
Model M35SS, Shown With
Optional 17" Backguard & Casters
Standard Features:
• Stainless steel front, front rail,
and sides.
• Infra-red, jet-type burner,
rated 110,000BTU/Hr.,
(32.23kW/Hr.)
• Piezo spark ignition with constant burning, 100% safety
pilot
• Built-in pressure regulator
• 35lb., (16kg), capacity stainless steel frypot
• Twin chrome wire baskets
• 6" (152mm), chrome steel
adjustable legs
Optional Features:
Stainless steel common front
rail up to 68" (1728mm), wide,
(2 or more units in a battery)
Stainless steel main back
Additional fry baskets
Large single fry basket
Stainless steel frypot cover
Stainless steel fish plate
Rear gas connection, 3/4" or
1-1/4" NPT
Manifold end cap(s) and
cover(s), (no charge)
Swivel casters, (4), with front
brakes
Polyurethane, non-marking
swivel casters, (4), with front
brakes
6" (152mm) stainless steel
adjustable legs
Stainless steel backguard: 10"
(354mm), 17" (432mm) or 33"
(838mm) high
17" (432mm) wide frymate
dump station, storage base,
stainless steel pans with drain
Chrome plated wire rack with
handles, model M14FD
Heat lamp for dump station
Specifications:
Heavy-duty, range-match gas fryer, model M35SS.
110,000 BTU/Hr., (32.23kW), infra-red jet-type burner.
35lb., (16kg), capacity stainless steel fry pot. 17"
(432mm), wide x 38" (965mm), deep, including 8-1/4"
(210mm) deep. Stainless steel front, front rail and,
sides.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
®
NOTE: Fryers suppled with casters must be installed
with an approved restraining device.
Master Series Heavy Duty Gas Fryer
TOTAL INPUT
110,000 BTU/Hr
(32.23kW/Hr)
Gas input ratings shown here are for installations up to 2,000 feet (610mm) above sea level.
37-7/8"
[962mm]
MANIFOLD OPERAT-
ING PRESSURE
INSTALLATION ENTRY
NAT PRO Sides Rear Crated Uncrated
4.0" WC
(10mbar)
9.0" WC
(22mbar)
6"
(152mm)
CLEARANCES SHIPPING
Cu Ft Weight
6"
(152mm)
29-1/4"
(746mm)
17-1/4"
(618mm)
26
Input must be derated for high altitude installations.
FRYING CAPACITY (per hour)
FRENCH FRIES FISH BREADED CHICKEN
Raw to Done Blanched to Done 3oz. (84g), Battered Raw to Done
60lb. (27kg) 80lb. (36kg) 60lb. (27kg) 28lb. (13kg)
3-1/2"
[89mm]
DIMENSIONS & SPECIFICATIONS
Width 17"(432mm)
Depth 38" (965mm
Height (w/ NSF Legs) 36-3/8" (924mm)
Height (w/o NSF Legs) 30-3/8" (772mm)
34-3/8"
[873mm]
Garland/U.S. Range products are not approved or authorized
for home or residential use, but are intended for commercial
applications only. Garland / U.S. Range will not provide service,
warranty, maintenance or support of any kind other than in
13-1/8"
[333mm]
commercial applications
220lb.
(100kg)
33-3/8"
[848mm]
30-1/4"
[768mm]
6"
[152mm]
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
17"
[432mm]
NOTE:
Double-Deck High Shelf,
(DDHS), is not recommended
for use over fryer.
33-7/8"
[860mm]
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
31-1/2"
[800mm]
1-1/4" N.P.T.
[32mm]
GAS INLET
34"
[864mm]
BACKGUARD
40-1/4"
[1022mm]
With "LPBG"
BACKGUARD
46-3/4"
[1187mm]
With "BG"
63-3/4"
[1619mm]
With "DDBG"
BACKGUARD
Form# M35SS (08/02/11)
Loading...