Garland M17B User Manual

Master Series Heavy Duty Range-Match Char-Broiler
Models:
M17B  M24B  M34B
M17BT  M24BT  M34BT
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Master Series Heavy Duty Range-Match Char-Broiler
Range-Match Char-Broilers
Model M34B
(valve control panel not as depicted)
Standard Features:
• Stainless steel front doors
• Stainless steel front & black pow‑ der coat sides
• Stainless steel front rail
• 1‑1/4" NPT front manifold
• Dual sided, cast iron broiler grates with 1/2" (13mm) rounded bar, (board brand) and diamond (fine) pattern on opposite sides
• 15,000 BTU (4.39 kW) burners,
• Piezo spark ignition with con‑ stant burning pilots
• Storage base interior of alumi‑ nized steel
• Modular top broilers (suffix "BT"), modular broiler is 14‑1/2" (368mm) from broiler base to working height
• 6" (152mm) chromed steel adjustable legs
Optional Features:
Stainless steel left, right, or both
sides; main back
Rear gas connection; 3/4" NPT Gas regulator 3/4" or 1‑1/4" Gas shut off valve; 3/4", 1" or 1‑
1/4" NPT
Gas flex hose & quick disconnect
(3/4", 1" or 1‑1/4" NPT x 5') w/ restraining device, please specify
End caps and cover (NC, specify) Stainless steel backguard: 10"
(354mm), 17" (432mm) or 33" (838mm)
Dual‑sided, steel diamond, (fine)
in lieu of cast iron grate
Dais Base (storage base models) Swivel casters (4) w/front brakes Polyurethane non‑marking swiv‑
el casters (4) w/front brakes
6" (152mm) stainless steel adjust‑
able legs
Specification:
Master Series Char‑broiler with stainless steel front & black power coat sides. Broiling area consists of heavy duty rack sections which are easily moved for flat or tilt position broiling. Dual sided, cast iron broiler grates with 1/2" (13mm) rounded bar, (board brand) and diamond (fine) pattern on opposite side. 15,000 BTU (4.39 kW) burn‑ ers controlled by individual Hi‑Lo valves. Large capacity full length grease drawers. Heav y‑weight, long lasting briquettes. Cabinet, 17" (432mm), 24" (610mm), or 34" (864mm), wide by 34" (869mm) deep, with two stainless steel full‑sized hinged doors and front. Natural gas or pro‑ pane. Available in modular models,suffix BT
Garland Commercial Ranges Ltd 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA Phone: 905-624-0260 Fax: 905-624-5669
NOTE: Broilers suppled with casters must be installed with an approved restraining device.
INPUT SPECIFICATIONS M17B/BT M24B/BT M34B/BT
Input 45,000 BTU (13.2 kW) 60,000 BTU (17.6 kW) 90,000 BTU (26.4 kw)
Inlet/Manifold Size 1‑1/4" NPT 1‑1/4" NPT 1‑1/4" NPT
INSTALLATION NOTES
Combustible Wall Clearances ¹ Entry Clearances Operating Pressure
Sides:6" (152mm) Back: 6" (152mm)
Crated: 39‑1/4" (997mm)
Uncrated: 34‑1/4" (870)
Natural: 6" WC (15mbar)
Propane: 10" WC (25mbar)
Master Series Heavy Duty Range-Match Char-Broiler
37-7/8"
[962mm]
13-1/8"
[333mm]
9-3/4"
[248mm]
WIDTH
3-1/2"
[89mm]
31-1/2"
[800mm]
2-7/8"
[73mm]
Cu Ft
Shipping
Shipping Wt:
(Lb/Kg)
PRODUCT
M17B 17(432) 38(965) 24 235/107
M17BT 17(432) 38(965) 10 135/60
M24B 24(612) 38(965) 30 330/150
M24BT 24(612) 38(965) 16 230/105
M34B 34(864) 38(965) 48 510/231
M34BT 34(864) 38(965) 24 390/180
¹NOTE: Installation clearance reductions are applicable only where local codes permit.
Data applies only to North America Gas input ratings shown here are for installations up to 2,000
ft. (610m) above seal level. Specify altitudes over 2,000 ft. Please specify gas type when ordering.
Width:
In(mm)
Depth: In(mm)
31-1/2"
[800mm]
14-/12"
[368mm]
30-3/8"
[772mm]
33-7/8"
[860mm]
6"
[152mm]
Garland/U.S. Range products are not approved or authorized for home or residential use, but are
intended for commercial applications only. Garland / U.S. Range will not provide service, warranty,
maintenance or support of any kind other than in commercial applications.
Garland Commercial Ranges Ltd 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA Phone: 905-624-0260 Fax: 905-624-5669
1-1/4" N.P.T.
[32mm]
GAS INLET
34"
[864mm]
Form# M17BM24BM34B (08/09/10)
40-1/4"
[1022mm]
Loading...