Garland GI-HO, IN 1500 Quick Manual
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Induction Green Heat
Date: ______________________________
Garland Induction Built-in Heat Retaining Unit RTCSmp Install Hold-Line
Models:
GI-HO/IN 1500
Built-in induction warm holding system
consisting of:
Induction generator, with two heat
retaining/holding zones, and two
separate control units.
Equipped with the latest RTCSmp
(Realtime Temperature Control System)
technology.
Induction Green Heat
Garland Induction Built-in Heat Retaining Unit RTCSmp Install Hold-Line
Standard Features
Induction generator:
u
A generator, developed specifically for heat retaining/holding,
built in an aluminum enclosure, which includes an integrated
air fan.
Fresh air is supplied by the fan, located at the bottom of the
unit. The unit is also equipped with an air guiding system that
directs the hot air out of the housing.
Heat retaining plate:
v
The heat retaining plate is equipped with the latest RTCSmp
sensor technology which enables temperature controls in realtime. The set temperature is displayed via a 7-segment display
underneath the Ceran glass. The heat retaining plate includes
five (5) temperature sensors per zone. The unit has two zones
that can be controlled at different temperatures.
Space saving and compact construction with a Ceran glass
on top of the unit, that allows the installation of the unit in
shallow cabinets.
Control unit:
w
The control switch consists of a chrome sheet metal cover
with a built in power switch. The power switch is enclosed in
polymer housing, with high resistance to external impacts.
The control switch is connected with the generator via an RJ45
cable.
The control unit regulates the temperature in an increment
of 5°F (1°C) and this from 122-212°F (50 to100°C). The set
temperature and the current temperature are shown via the
7-segment display that is located underneath the Ceran glass.
Safety above all:
• RTCSmp electronic temperature control that monitors the
state of the induction coil, power board, CPU and the Ceran
glass temperature.
• RTCSmp monitors the energy supply
• No Pan No Heat – Only if an induction suitable pan is
located on the glass that energy will be consumed.
Optional Features
• Optional induction ready holding pans available contact your
dealer for sizes and prices.
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with
UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES- 001
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
31.50” (800 mm)
30.39” (772 mm)
plug cover for connection of
external operation control
31.50” (800 mm)
Induction Green Heat
Garland Induction Built-in Heat Retaining Unit RTCSmp Install Hold-Line
A
air supplyair exhaust
(7.5 mm)
15.75”
(400 mm)
15.75” (400 mm)
4.49”
(114 mm)
14.65” (372 mm)
DETAIL A 1: 2
0.30”
0.55”
(14 mm)
air exhaust
service interface
3.94”
(100 mm)
7.87”
(200 mm)
3.94”
(100 mm)
port for
2.05”
(52 mm)
2.56”
plug cover for connection of
external operation control
(65 mm)
Technical Data
Generator housing: 31.5”x15.75”x4.5” (800x400x114 mm)
Wattage: 120V, 1Ph, 1500W, 12A
Air flow fan: 1765 ft3/h (50 m3/h)
Cut out for air supply: 6.36 sq. in (4100 mm2)
Cut out: 31.8”x16”x4.7” (808x408x120 mm)
Qty. of heat retaining zones: 2
Power per plate: 750W
Ceran glass: 31.5”x15.75”x0.16” (800x400x4 mm)
grease lter/
air supply
4.33”
(110 mm)
7.87”
(200 mm)
3.54”
(90 mm)
5.98”
(152 mm)
2.24”
(57 mm)
Garland/U.S. Range products are not approved
or authorized for home or residential use, but
are intended for commercial applications only.
Garland / U.S. Range will not provide service,
warranty, maintenance or support of any kind
other than in commercial applications.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Form# GI-HO/IN 1500 (12/19/13)
Loading...