Garland GI-SH 5000 User Manual
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Induction
Date: ______________________________
Built In Wok 3.5kW and 5.0kW
Models:
GI-SH/WO/IN 3500 GI-SH/WO/IN 5000
Induction uilt In Wok 3.5kW and 5.0kW
Installation Notes:
The unit is designed to be installed into a
counter. An integral cooling fan keeps the
electronics cool. Garland of fers an optional air
intake kit, recommended for all enclosed
installations.
The unit takes cooling air in from the bottom,
and discharges from both sides. The optional
air intake kit connects directly to the unit. A
minimum of 30 sq. inch (19.34 sq. cm) opening
for the exhaust must be allowed for proper
operation in the design of the cabinet.
Standard Features:
• Drop-in, flush mounted
design with stainless steel
body below counter bowl to
accept wok pan
Remote control and indicator
•
light mounted on a control
panel plate with a 3 foot
(914mm) cable
Integral cooling fan keeps
•
electronics cool and provi-
sions must be made to allow
for air intake and exhaust
when mounted in a counter
• 6’ (1829mm) cord and plug
supplied (60 cycle units only)
• “Flat Design”, compact high
performance electronics
• Thermostatically controlled
overheat sensor shuts the unit
off preventing damage from
pans cooking dr y
• Instant energy transmission
to the pan
• Induction technology
transfers heat to the pan,
not to the surrounding air
• Innovated new technology for
pan detection; RTCS is an
internal control software
development matching speed,
capability and per formance.
R – Real Time
T – Temperature
C – Control
S – System
• Electronic output limitation
continually monitors the
energy transfer to the pan,
helping to ensure the most
efficient energy transfer
possible
• Available in either 3.5 kW or
5.0 kW
• Built-Air-In-Take-Kit (part
number 95000021) includes:
- Aluminum Spiroflex air duct,
5m
- Grease f ilter
- Mounting Kit
Options & Accessories
High quality induction stainless
steel wok pan; 5.2 liter for 3.5
kW and 9.1 liter for the
5.0 kW unit
Specifications:
Shall be a Garland Single Drop-In Induction Wok, model GI-SH/WO/IN 3500
with a total kilowatt rating of 3.5kW or model GI-SH/WO/IN 5000 with a
total kilowatt rating of 5.0 kW. Drop in mounts flush with counter, built with
a robust stainless steel casing with ceran ceramic glass bowl to accept an
induction rounded pan. Compact powerful electronic system for years of
reliable service. Overheat sensors help prevent damage if pan is run dry.
Easy to operate system supplied with remote rotary mounted control. Unit
to come with integral cord and plug for 208V or 240V (specify at time of
order), 60 Hz, single phase.
Note: Induction cooking requires magnetic pots and pans to work effectively.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Conforms to UL-197 & NSF-4
Certified to CAN/CSA
C22.2 NO. 109 VDE EN60335-2-38
Induction Built in Wok 3.5kW and 5.0kW
(1.5mm)
Air exit
15.12”
(384mm)
0.06”
Side view of the right
Ventilator
7.20”
(183mm)
WOK-CERAN-BOWL
1.
1
Air supply
13.47”
(330mm)
0
81” (3
Front view
Air exit
8.46”
(5mm)
9.92”
(252mm)
3.86”
(98mm)
14.31” (363.5mm)
Plug-in clutch
13.03”
for operation device
(331mm)
Connection clutch
for operation device
Net cable
16.69”
(297mm)
Plug Congurations:
Model
GIWOK-3.5BI208V/60Hz/1Ø
)
M
0M
GIWOK-5.5
BI
Electrical
Characteristics
240V/60Hz/1Ø
208V/6Hz/1Ø
Plug
15.12”
(384mm)
Required cut-out of the work top
min. 14.49” x 14.49”
(368mm x 368mm)
Mounting height
min. 11.81”
(300 mm)
Air supply
Electrical Loading:
Model Watts 208/60/1 208/60/3 240/60/1
GI-SH/WO/IN 3500 3500 17 amp N/A 14 amp
GI-SH/WO/IN 5000 5000 N/A 14 amp N/A
4.09"
[104mm]
4.09"
[104mm]
4.72"
[120mm]
0
0.55"
1.34"
(14mm)
2.28"
(34mm)
(58mm)
4.17"
(106mm)
[120mm]
4.72"
3.62"(92mm)
Form# GI-SH/WO/IN 3500/5000 (12/08/11)
4.72"
(120mm)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Loading...