Garland GI-HO 1500 Quick Manual
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Induction Green Heat
Date: ______________________________
Garland Induction Tabletop Heat Retaining Unit RTCSmp Hold-Line
Models:
GI-HO 1500
Induction warm holding system
consisting of:
Induction generator with two heat
retaining/holding zones.
Equipped with the latest RTCSmp
(Realtime Temperature Control System)
technology.
Induction Green Heat
Garland Induction Tabletop Heat Retaining Unit RTCSmp Hold-Line
Standard Features
Induction generator:
u
A generator, developed specifically for heat retaining/holding,
built in an aluminum enclosure, which includes an integrated
air fan.
Fresh air is supplied by the fan, located at the bottom of the
unit. The unit is also equipped with an air guiding system that
directs the hot air out of the housing.
Heat retaining plate:
v
The heat retaining plate is equipped with the latest RTCSmp
sensor technology which enables temperature controls in realtime. The set temperature is displayed via a 7-segment display
underneath the ceramic glass. The heat retaining plate includes
five (5) temperature sensors per zone.
The unit has two zones that can be controlled at different
temperatures.
Control unit:
w
The control switches are located on the bottom sheet of the
unit, easy accessible for the user.
The control unit regulates the temperature in an increment
of 5°F (1°C) and this from 122-212°F (50 to100°C). The set
temperature and the current temperature are shown via the
7-segment display that is located underneath the ceramic glass.
Safety above all:
• RTCSmp electronic temperature control that monitors the
state of the induction coil, power board, CPU and the ceramic
glass temperature.
• RTCSmp monitors the energy supply.
• No Pan No Heat – Only if an induction suitable pan is
located on the glass that energy will be consumed.
Optional Features
• Optional induction ready holding pans are available, please
contact your dealer for sizes and prices.
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with
UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES-001
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Induction Green Heat
(114 mm)
Garland Induction Tabletop Heat Retaining Unit RTCSmp Hold-Line
air exhaust
31.50” (800 mm)
30.39” (772 mm)
31.50” (800 mm)
temperature
control eld 2
air supply
port for
service interface
ON/OFF
Switch
grease lter/
air supply
15.75”
(400 mm)
15.75” (400 mm)
14.65” (372 mm)
temperature
control eld 1
4.49”
3.94”
(100 mm)
air exhaust
7.87”
(200 mm)
3.94”
(100 mm)
2.05”
(52 mm)
2.56”
(65 mm)
Technical Data
Generator housing: 31.5”x15.75”x4.5” (800x400x114 mm)
Wattage: 120V, 1Ph, 1500W, 12A
Quantity of heat retaining zones: 2
Power per plate: 750W
Ceran glass: 31.5”x15.75”x0.16” (800x400x4 mm)
4.33”
(110 mm)
7.87”
(200 mm)
3.54”
(90 mm)
5.98”
(152 mm)
2.24”
(57 mm)
Garland/U.S. Range products are not approved
or authorized for home or residential use, but
are intended for commercial applications only.
Garland / U.S. Range will not provide service,
warranty, maintenance or support of any kind
other than in commercial applications.
Form# GI-HO 1500 (12/19/13)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Loading...