Garland GI-GR 5000 User Manual
Induction Built In
Griddle 3.5kW and 5.0kW
Models:
GI-SH/GR/IN 3500 GI-SH/GR/IN 5000
Standard Features:
• Drop-in, flush mounted
design with stainless steel
body below counter and with
durable grill plate surface.
Plate construction is a low
friction,abrasion,chemical,
corrosion and heat resistant.
• Compact high power induction griddles available in
either 3.5 kW or 5.0 kW
• Instant energy transmission
from inverter coil to griddle
plate surface for excellent
How Induction Works:
Although induction seems magical in how it
works, there is a scientific explanation.
1. An alternating current in an induction coil
produces an alternating magnetic field
2. This magnetic field is instantly transferred
and concentrated to the cooking vessel
3. This concentrated magnetic energy in the
cooking vessel causes it to heat up and start
cooking
4. When the vessel is removed from the heat
source, the induction unit automatically
shuts off
temperature recovery; heat
up time, 68°to 392°F (20°
to 200°C), 4.30 minutes for
3.5kW, 3.00 minutes for 5.0kW
• Equal heat distribution for
corner to corner, with consistent results across the entire
cooking surface. Surface is
controlled and monitored,
resulting in automatic adjustment as soon as a temperature
deviation is detected
• Stainless Steel cabinet construction
• Removable, reusable intake
filter
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
• Removable stainless steel griddle plate splashguard
• Easy access front grease trough
• 6' (1829mm) cord and plug
supplied
• Integral cooling fan keeps
electronics cool, discharing
from rear with protective air
deflectors preventing hot
exhaust to be pulled back into
unit
• Innovated new technology
for temperature differential
sensing; RTCSmp is an internal
control software development
matching speed, capability and
performance.
R – Real Time
T – Temperature
C – Control
S – System
m – Multi
p – Point
• Built-Air-In-Take-Kit (part
number 95000021) includes:
- Aluminum Spirof lex air duct,
5m
- Grease f ilter
- Mounting Kit
Induction Built In Griddle 3.5kW and 5.0kW
Specifications:
Shall be a Garland Induction Built In Griddle, unit model
GI-SH/GR/IN 3500 with a total kW rating of 3.5 kW or model
GI-SH/GR/IN 5000 with a total kW rating of 5.0 kW. Built
with a durable easy to clean stainless steel exterior and a
griddle plate, manufactured with a fine match of
mechanical, chemical and electrolytic surface coatings.
Rotary dial thermostat control with LED read out 69°-450°F
(20°-230°C). Unit to come in 208V power with integral cord
and plug.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Conforms to UL-197 & NSF-4
Certified to CAN/CSA
C22.2 NO. 109 VDE EN60335-2-38
RTCSmp Built-In Griddle SH/GR/IN 3500 and 5000 General Overview Measurements
21.3” (541mm)
20.91” (531mm)
21.3” (541mm)
20.51” (521mm)
20.51” (521mm)
7.05” (179mm)
4.65” (118mm)
1.81” (46mm)
3.43” (87 mm)
2.68” (68 mm)
0.67” (17mm)
mains cable
mains cable
grease expiry
air exhaust
air supply
CAN/BUS
intakesleeve for
optimal fresh air supply
15.75” (400 mm)
14.96” (380 mm)
5.91” (150 mm)
3.46” (88 mm)
2.44” (62 mm)
6.26” (159 mm)
15.35” (390 mm)
(Refer o installation/owners manual for detail installation instructions)
Induction Built In Griddle 3.5kW and 5.0kW
Griddle Control Box Section
(Refer to installation/owners manual for detail installation instructions)
10.51” (267 mm)
7-segment display for
temperature display
3.54” (90 mm)
PLUG CONFIGURATIONS:
Model
Electrical
Characteristics
GI-SH/GR/IN 3500 208V/60Hz/1Ø
Plug
GI-SH/GR/IN 3500 3500 17 amp N/A
GI-SH/GR/IN 5000 5000 N/A 14 amp
Model Watts 208/60/1 208/60/3
Garland/U.S. Range products are not approved or autho-
GI-SH/GR/IN 5000 208V/60Hz/3Ø
rized for home or residential use, but are intended for
commercial applications only. Garland / U.S. Range will
not provide service, warranty, maintenance or support of
any kind other than in commercial applications.
2.17” (55 mm)
3.54” (90 mm)
Electrical Loading:
Form# GI-SH/GR/IN 3500/5000 (12/14/11)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Loading...