Garland GI-BH-IN 2500 User Manual
Induction
Baby Hob Built In 2.5kW
Models:
GI-BH/IN 2500
Item: GI-BH/IN 2500
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Induction Baby Hob Built In 2.5kW
Installation Notes:
The unit is designed to be installed into a counter. An integral cooling fan keeps the electronics cool. Garland offers an optional air intake kit,
recommended for all enclosed installations.
The unit takes cooling air in from the bottom,
and discharges from both sides. The optional air
intake kit connects directly to the unit. A minimum of 30 sq. inch (19.34 sq. cm) opening for
the exhaust must be allowed for proper operation in the design of the cabinet.
Standard Features:
Drop-in, flush mounted
•
design with stainless steel
body below counter and high
impact ceramic glass top
Remote control and indicator
•
light mounted on a control
panel plate with a 3 foot
(914mm) cable
Integral cooling fan keeps
•
electronics cool and
provisions must be made
to allow for air intake and
exhaust when mounted in a
counter
• 6' (1829mm) cord and plug
supplied (60 cycle units only)
• “Flat Design”, compact high
performance electronics
• Thermostatically controlled
overheat sensor shuts the unit
off preventing damage from
pans cooking dr y
• Instant energy transmission to
the pan
• Induction technology
transfers heat to the pan, not
to the surrounding air
• Innovated new technology
for pan detection; RTCS is
an internal control software
development matching speed,
capability and performance
R – Real Time
T – Temperature
C – Control
S – System
• Electronic output limitation
continually monitors the
energy transfer to the pan,
helping to ensure the most
efficient energy transfer
possible
• 2.5 kW single-phase power
only
• Built-Air-In-Take-Kit (part
number 95000020) includes:
- Aluminum Spirof lex air duct,
5m
- Grease f ilter
- Mounting Kit
Specifications:
Shall be a Garland Single Drop-In Induction Unit GI-BH/IN 2500
with a total kilowatt rating of 2.5 kW. Drop-in mounts flush
with counter, built with a robust stainless steel casing with
ceran ceramic glass work top. Compact powerful electronic
system for years of reliable service. Overheat sensors help to
prevent damage if pan is run dry. Easy to operate system
supplied with remote rotary mounted control. Unit to come
with integral cord and plug for 208V or 240V (specif y at time of
order), 60 Hz, single phase.
Note: Induction cooking requires magnetic pots and pans to
work effectively.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Conforms to UL-197 & NSF-4
Certified to CAN/CSA
C22.2 NO. 109 VDE EN60335-2-38
Induction Baby Hob Built In 2.5kW
Side View of the right
0.06"
[1.5mm]
air exit air exit
[171mm]
12.20"
[310mm]
Mains
Cable
6.73"
10.23"
[260mm]
Ceran-surface
Ventilator
air supply
11.02"
[280mm]
4.06"
[103mm]
10.23"
[260mm]
5.04"
[128mm]
[84mm]
Plug Congurations:
MODEL
GI-BH/IN 2500
3.07"
11.02"
[280mm]
Electrical
Characterists
208V/60Hz/1Ø
240V/60 Hz/1Ø
Front view
Connection
clutch for
operation devic
Plug-in clutch for
operation device
4.09"
[104mm]
7.32"
[186mm]
e
Plug
12.20"
[310mm]
Required cut-out of the work top
min. 11.42" x 11.42" [290mm x 290mm]
Mounting height
min. 7.87"
[200mm]
air supply
Electrical Loading:
Model
Watts
208/60/1
208/60/3
240/60/1
GI-BH/IN 2500 2500 12 amp N/A 9 amp
4.09"
[104mm]
4.72"
[120mm]
4.72"
[120mm]
4.17"
0
0.55"
(14mm)
1.34"
2.28"
(34mm)
3.62"(92mm)
(58mm)
4.72"
(106mm)
(120mm)
Form# GI-BH/IN 2500 (12/08/11)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Loading...