Designer Series
Gas Fryer
Models:
GD-15F
Standard Features:
• Stainless steel front and
• 4" (102mm) Sanitary legs
• Easy clean features
• Open pot design, no
• Deep cold zone, keeps
• Cold rolled steel frypot
• Front drain ball valve 1"
Model GD-15F
• 15 lbs shortening capac-
• 100% safety system
sides
tubes
contaminants out of
cooking area, extending
shortening life
(25.4mm) IPS
ity
Item: GD-15F
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
• 1° F snap action thermostat
• Piezo spark ignition
• Rear gas connection w/
pressure regulator
• Natural or propane gas
• 45,000 total BTU
• Twin fryer baskets
Optional Features:
Stainless steel back and
bottom
Note: Stands are available
see form # CS24/CSD
Designer Series Gas Fryer
Specifications:
Gas designer series fryer, Model GD-15F; 15"
(381mm) wide, 24" (610mm) deep x 20" (508mm)
high, easy clean design, with stainless steel front
and sides. Steel frypot with open pot design,
15 lbs. shortening capacity and deep cold zone.
Exclusive 1° F snap action thermostat. Piezo spark
ignition, natural or propane gas, 45,000 total BTU
input. Designed as free standing or to be banked
with other GD series equipment.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Designer Series Gas Fryer
MODEL
GD-15F 15" (381mm) 20" (508mm) 24" (610mm) 45,000/13.2 6 120/54
Gas Input ratings shown here are for installations
up to 2,000 ft. (610m) above sea level. Specify altitudes over 2,000 ft.
Garland products are not approved or authorized
for home or residential use, but are intended for
commercial applications only. Garland will not provide service, warranty, maintenance or support of
any kind other than in commercial applications.
Width Height Depth
Over All Dimensions
Sides Back
6" (152mm) 6" (152mm) Non Combustible
Total Input
BTU/Kw
Clearances To
Combustible Wall
Manifold
Inlet Size
NPT
1/2" 4.2 10.5 9 22.4
Manifold Operating Pressure
"WC mbar "WC mbar
Cu.
Ft.
Floor or Base
Natural Propane
1 1/2"
[38mm]
Shipping Wt
Lb/kg
20"
[508mm]
15"
[381mm]
21 3/4"
[552mm]
24 1/2"
[622mm]
15 7/8"
[403mm]
1/2"
[13mm]
1 15/32"
[37mm]
[610mm]
1 5/16
[33mm]
15"
[381mm]
24"
Form# GD-15F (08/23/11)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668