Garland G24-24G User Manual

Item #:______________________________ Models: All G24 Series Product Name: Heavy-Duty Griddles
Griddle Features:
• Stainless steel front - remainder black
• Full spatula width front grease trough
• Large grease bucket holds 1-3/4 gallons (7.9 liters)
• 3/4" (19mm) polished steel plate griddle w/2-5/8" (67mm) welded splash guards on both sides and rear
• 24" (610mm) deep grilling surface
• Available with thermostats or Hi-Lo Valves
• Chrome plated thermostat guards
• 33,333 BTU for every 12" of griddle width
• 5 griddle widths Available - 24" (610mm) through 72" (1829mm)
Optional Features:
Stainless steel sides
Grooved griddle plate (in 12" sections)
G24 Series Heavy-Duty Griddles Models: G24 -24, 36, 48, 60, 72
Model G24-36TH
(shown mounted on CS24-36 stand)
Specifi cation:
Heavy duty gas griddles available in fi ve (5) widths; 24", 36", 48", 60", and 72". High performance, high volume production with even, consistent, controlled temperatures. 3/4" (19mm) thick griddle plate.
Garland has designed this heavy-duty griddle to give you the features required for high-volume operations. Individual thermostats for each foot of griddle width and maximum heat input per square inch of grilling surface.  e heavy­duty thermostat system and superior burner design ensures a griddle with a completely even heat pattern, accurate temperature control and recovery that can’t be killed.
Optional CS24 Series Stands:
Floor Stands: Heavy-duty stands of open design with seamless welded square tube legs. Black finish Storage shelf supplied with stands up to 48" (1219mm) wide. Working height of all units on stands 35-1/2" (902mm) Stand widths available in 15" (381 mm), 24" (610mm), 30" (762mm), 36" (914mm), 48" (1219 mm), 60" (1524mm) and 72" (1829mm). Example for G24-36G griddle, specify compatible CS24-36 stand. For stainless steel finish, add SS suffix to model number.
Optional:
Swivel casters; set of 4
Garland Commercial Industries, Inc.
185 East South Street
Freeland, Pennsylvania 18224
Phone: (570) 636-1000
Fax: (570) 636-3903
Garland Commercial Ranges Ltd
1177 Kamato Road, Mississauga, Ontario
L4W 1X4 CANADA
Fax: 905-624-5669
Enodis UK LTD
Swallowfi eld Way, Hayes, Middlesex
UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
Item #:______________________________
W
4-9/16" (116mm)
3/4" NPT GAS INLET (G24-24, G24-36) 1" NPT GAS INLET (G24-48, G24-60, G24-72)
1-1/2"
(38mm)
11-1/8"
(283mm)
30-3/4"
(781mm)
13-1/4"
(337mm)
1-7/8"
(48mm)
3/4" NPT GAS INLET (G24-24, G24-36)
1" NPT GAS INLET (G24-48, G24-60, G24-72)
Models: All G24 Series Product Name: Heavy-Duty Griddles
Input Chart Natural Gas Griddle Production Capacities
Meat Patties
Model Description Controls BTU/HR
G24-24G
G24-24GTH
G24-36G
G24-36GTH
G24-48G
G24-48GTH
G24-60G
G24-60GTH
G24-72G
G24-72GTH
24” (610mm)
Griddle
36” (914mm)
Griddle
48” (1219mm)
Griddle
60” (1524mm)
Griddle
72” (1829mm)
Griddle
2 Hi-lo Valves
2 Thermostats
3 Hi-lo Valves
3 Thermostats
4 Hi-lo Valves
4 Thermostats
5 Hi-lo Valves
5 Thermostats
6 Hi-lo Valves
6 Thermostats
66.500 33 165 27 540 27 135
100,000 50 250 40 800 40 200
133.000 67 335 53 1060 53 265
166,500 83 415 67 1340 67 335
200,000 100 500 80 1600 80 400
3 Oz. (85 g)
350° F (177°C)
Per Load Hourly Per Load Hourly Per Load Hourly
Installation Notes
Manifold Operation Pressure Combustible Wall Clearances: In (mm)
Normal Supply Pressures Sides Back Base
Natural Gas Propane 6(152) 6(152) Non-combustible
4” WC (10 mbar) 10” WC (14 mbar)
Note: For use with Natural & L.P Gas only
NOTE: Installation clearance reductions are applicable only where local codes permit
Fried Eggs
300°F(149°C)
Pancakes
4” Dia. (102mm)
Ratings shown are for natural gas installations up to 2000 feet (610m) above sea level. BTU input ratings must be de-rated for high altitude installations. Specify altitude of product if over 2000 feet (610m)
Minute Steaks
4oz(112g)
350° F (177° C)
G24 Series Heavy-Duty Griddles Models: G24 -24, 36, 48, 60, 72
Printed in USA
Model W
G24-24G
G24-24GTH
G24-36G
G24-36GTH
G24-48G
G24-48GTH
G24-60G
G24-60GTH
G24-72G
G24-72GTH
24” (610mm)
36” (914mm)
48” (1219mm)
60” (1524mm)
72” (1829mm)
Continuous product improvement is a Garland policy.
Specifications and design are subject to change without notice. Form #G24 (02/07)
Loading...