Garland ECG-24R User Manual
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Master Electric
Date: ______________________________
Production Griddle
Models:
ECG-24R ECG-36R ECG-48R ECG-60R ECG-72R
Master Electric Production Griddle
Model ECG-48R
(Shown on optional stand)
NOTE: Griddles suppled with casters must
be installed with an approved restraining
device.
Standard Features:
• Full-width front rail
• Rear grease trough with bottom drawer
• Three (3) flat bar heating elements, (4.3 kW total), per 12"
(305mm) of griddle width
• 208 or 240 volt models
• Electric main on/off power
switch w/indicator light,
(green)
• On/off switch for each thermostat
• Electronic thermostat,
(150°F/66°C - 450°F/232°C), for
each 12" (305mm) heat zone
• “Heat-On” indicator light,
(amber)
• Stainless Steel sides
• Stainless steel front panel
• Stainless steel backguard
• Stainless steel grease trough
• Stainless steel side griddle
splashguards
• Stainless steel 6" (152mm)
deep, sloped grease drawers
with integral grease baffles
• 6" (152mm) stainless steel
adjustable legs
• Nickel-plated thermostat
guards
• Eight-inch high backsplash
• Contoured grease chute
opening
• 6' (1829mm) cord and plug
standard on 24" - 48" 3-phase
models and on 24"-240V,
single -phase models.
Optional Features
Export voltages,
(220/240V/50Hz), available
upon request, direct connection to junction box is
required. No cord and plug
are included, no charge
10-1/2" (266mm) deep grease
drawers , no charge (stand
models only)
Protective shield for controls
All stainless steel open stand,
30.292" (769mm) high with
bottom shelf on adjustable
legs or casters
Specifications:
Heavy-duty electric griddles, available in five sizes, 24"
36", 48", 60" & 72" wide. High performance, volume
production with even, consistent, controlled
temperatures One-inch (25mm) thick griddle plate.
Electronic thermostat with embedded sensor and three
efficient flat bar heating elements per 12" (305mm) of
griddle width. All stainless steel exterior. Full-width
front rail, high capacity, sloped bottom grease drawers.
6" (152mm) legs standard, or optional stand.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
®
C US
13-3/4"
ECG-36R 240V, 3ph
60A locking plug)
(349mm)
Master Electric Production Griddle
3"(76mm)
(1032mm)
Model
ECG-24R
ECG-36R
ECG-48R
ECG-60R
ECG-72R
40-5/8"
Width
(610mm)
(914mm)
(1219mm)
(1524mm)
(1929mm)
(W)
24"
36"
48"
60"
72"
24"
(610mm)
36-5/16"
(922mm)
6"
(152mm)
35-1/32"
(890mm)
W
8-15/32"
(215mm)
6"
(152mm)
Voltage
208.0 8.60 2.60 3.00 3.00 22.3 23.3 25.0 41.3
240.0 8.60 2.60 3.00 3.00 20.2 20.2 21.7 35.8
208.0 12.90 4.30 4.30 4.30 35.8 35.8 35.8 62.0
240.0 12.90 4.30 4.30 4.30 31.0 31.0 31.0 53.8
208.0 17.20 5.60 6.00 5.60 48.3 46.6 48.3 82.7
240.0 17.20 5.60 6.00 5.60 41.9 40.4 41.9 71.7
208.0 21.50 6.90 7.30 7.30 59.1 59.1 60.8 103.4
240.0 21.50 6.90 7.30 7.30 51.2 51.2 52.7 89.6
208.0 25.80 8.60 8.60 8.60 71.6 71.6 71.6 124.0
240.0 25.89 8.60 8.60 8.60 62.1 62.1 62.1 107.5
Total kW
Load
MODEL ECG-36R SHOWN
Load Per Phase Amps Per Phase
X-Y X-Z Y-Z X Y Z
Amps
1 phase
1-5/8"
(41mm)
22-5/8"
(575mm)
Shipping
Wt.
265 lbs.
(120kg)
400 lbs.
(181 kg)
500 lbs.
(227 kg)
600 lbs.
(277 kg)
700 lbs.
(318 kg)
CLEARANCES
Installation
Sides Back
6" (152mm) 6" (152mm)
Entry
Crated Uncrated
40" (1016mm) 38" (965mm)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
Flat blade NEMA plugs available:
G
X Z
Y
NEMA 15-30P
ECG-24R
240v, 3ph
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
X
Y
NEMA 15-50P
ECG-24R 208V, 3ph
ECG-36R 208V, 3ph
G
Z
G
Z
X
Y
NEMA 15-60P
ECG-48R
208/240V, 3ph
G
NEMA 8-50P
ECG-24R 240V, 1ph
(208V requires
Form# ECG (11/10/11)
Loading...