Garland E24-31F User Manual

Models:
E24-31F  E24-31SF
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
E24 Series Heavy Duty Electric Fryers
Standard Features:
• Stainless steel front and sides
• Twin nickle-plated perforated baskets
• Removable 30 Lb (13.5Kg) capacity nickel plated steel tank with heavy duty steel handles
• Available with or without 1" (25mm) drain valve (specify), counter models with legs normally come with fryer tank with out drain
• 4" (102mm) Sanitary legs
• Single unit sheath immersion
Model 24-31SF
(Shown with 1" (25mm) drain valve)
elements that swing up
• 200°F (93°C) to 375°F (190°C) hydraulic thermostat
• Recovery signal light
• Fail safe control with red flashing indicator light
Specifications:
Garland E24 Series heavy-duty counter fryers are designed and engineered for high volume fast food operations. Model E24-31SF super fryer preheats to 350° F ( 177°C) in less than 5 minutes, and model E24-31F fryer preheats to 350° F ( 177°C) in 6 ½ minutes. 200°F (93°C) to 375°F (190°C) hydraulic thermostat with recovery signal light, additional fail safe control turns fryer off if thermostat or contactor fail. Both models are designed to as freestanding units or bank with other E24 series equipment or with G24 series gas counter equipment. Stainless steel front and sides, 18" (457mm) wide x 29" (710mm) deep x 12-3/8" (314mm) high. Single unit metal sheath immersion elements give even heat to sides, back and bottom of tank. Heating elements tilt up to permit removal of the one piece drawn steel nickel
• One-Year limited parts & labor warranty (USA & Canada only)
Optional Features:
Large single basket in lieu of
twin baskets, NC
Additional fryer tank available
with or with out drain valve specify at time of order
Stainless steel back Stainless steel fryer bowl
cover
Stainless steel perforated fish
plate
Note: Stands are available see form # CS24/CSD
plated finish fry tank with heavy steel handles, han­dles also support baskets for draining. Tank capacity is 30 lbs. (13.5 kg). Twin nickel-plated perforated baskets are standard.
Garland Commercial Ranges Ltd. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA
General Inquiries 1-905-624-0260 USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668
LOADING CHART
Nominal Amperes Per Line
Model
E24-31F 12 29.0 29.0 29.0 33.5 33.5 33.5 50.0 58.0
E24-31SF 16 42.0 33.0 42.0 48.0 38.0 48.0 67.0 77.0
Export voltage available on request – Specify wiring required kW loadings are reduced on 220 volt systems. Standard wiring 240 volt (220/240) or 208 volt (197/219) single or three phase – Specify which is required
Total Kw
Load
French Fried Potatoes Chicken Fish Breaded
Model
E24-31F 6/2.7 60/27 6/2.7 88/40 3.6/1.6 36/16 3.5/1.6 105/47
E24-31SF 6/2.7 80/36 6/2.7 118/53 3.5/1.5 42/19 3.5/1.6 116/52
Raw to Finish
Load Hourly Load Hourly Load Hourly Load Hourly
240V 208V
X Y Z X Y Z
FRYER CAPACITY in Lbs/Kg
Frozen Blanched
3 Phase Single Phase
240V 208V
to Finish
Raw to Finish 2 Oz, (56g)
E24 Series Heavy Duty Electric Fryers
REAR CABLE
ENTRANCE
29"
[737mm]
7"
[178mm]
19-1/4"
[489mm]
14"
[356mm]
12-3/8"
[314mm]
18"
[457mm]
NOTE: Add 4" (102mm) to height if sanitary legs are used.
10-3/4"
[273mm]
[114mm]
Model
All Models
NOTE: N.F.P.A Requirement - Fryers shall be installed at least 16" (406mm) away from surface ame cooking equipment in accordance with local law.
Garland products are not approved or authorized for home or residential use, but are intended for commercial applications only. Garland will not provide service, warranty, maintenance or support of any kind other than in commercial applications.
4-1/2"
Overall Dimensions
Height Width Depth
12-3/8"
(737mm)
Installation Clearances
Side Rear
0 0)
18"
(457mm)
29"
(737mm)
28-21/32"
Shipping
Wt. Lb/kg
60/27
[728mm]
Form# E24-31SF/F Series (08/25/11)
Garland Commercial Ranges Ltd. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA
General Inquiries 1-905-624-0260 USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668
Loading...