Garelick 19537 User Manual

Instructions for: 19615-61, 19616-61, 19617-61

12.608

OVER PLATFORM TELESCOPING LADDER

MOUNTING INSTRUCTIONS

Thank you for selecting our superior quality Garelick
EEz-In Brand Boarding Ladder. Your ladder was
designed and manufactured using the finest material
available to provide long product life. Choosing the
proper size ladder for location and correct fit is
important to assure safe, convenient, and reliable use.

To select the proper length ladder, choose one that
allows at least two steps under water when ladder is
deployed.

Choose the most suitable side of your transom platform
for mounting the ladder. When mounting, locate a
place where the ladder will not interfere with the
turning of the motor or be near the propeller of your
craft.

See Figure 1

1. Using the gudgeon as a template, mark the four

bracket holes on the platform for drilling at desired
location. NOTE: Make certain that the brackets
are located on a strong, solid surface of the
platform. If this is not possible, use a backing
plate as shown to make the platform strong enough
for mounting.

2. Drill the four marked holes with a suitable drill bit,

making sure to keep the drill perpendicular to the
platform’s surface.

3. Mount the ladder to the platform with fasteners

suitable for your particular installation.

4. Periodically check fasteners for tightness and

polish the stainless steel with a suitable marine
grade polish to increase longevity.

Fold ladder up and secure when underway.

MAINTENANCE

• Keep that bright finish!

Local weather conditions may contribute to
minor corrosion. Stainless, like other metals, is
not completely free from corrosion attack.
Regular fresh water rinsing and periodic cleaning
with a mild abrasive cleaner will help to retain
lustre.

Write for GARELICK Phone: [phone]
A complete 644 2ND Street, PO Box 8 E-mail: [e-mail]
EEz-In Catalog St. Paul Park, Minnesota 55071 Website: www.garelick.com
2/09

• Safety tip

Periodically check mounting hardware and re­tighten (due to normal boat operation.)

SAFETY GUIDELINES

• No jumping or diving!

• Do not use when motor is running

• This ladder designed for boat use only

• Face ladder when entering boat or water

• Only one person on ladder at a time

• Check all steps and hardware before using

• Never operate your boat with the ladder in

“down” position. Serious injury, or damage to
your boat or ladder may result.

Figure 1

FASTENER
SUGGESTION

Note:
Fasteners
and backing
plate not
provided

Optional backing
plate for added
strength may be
required

Ladder ships with RE-USEABLE securing
strap holding ladder in stowed position.

DO NOT CUT!

To STOW ladder To DEPLOY ladder