Gardner Bender Gardner Bender PM3000 Manual

OPERATING INSTRUCTIONS

Power Meter

Model PM3000

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Read this owners manual thoroughly before use and save.

PM3000

Power Meter

3.

1. Screen

"SET/CLR" Button

2.

Used to erase the accumulative total energy consumption
or the accumulative power-on time data from memory.

I. INTRODUCTION

This Power Meter can be used to measure the average power and energy consumption of electrical appliance and can be
used for energy saving evaluation. It is easy to use and is an ideal test tool for home and industrial enterprises.

To use the Power Meter, plug the instrument into a standard AC outlet. Then insert the plug of the appliance to be
monitored into the socket of the instrument.

Socket

Used to connect the electrical appliance to be monitored.

4. "DISP" Button

Used to cycle through different data.

1

I I. DISPLAY

After the Power Meter is plugged into ac outlet, its screen will show the dynamic average power of the appliance
connected. You can press the "DISP" button repeatedly to cycle through different data. See the following table:

DISPLAY ITEM DESCRIPTION

Default item, the display shows the dynamic average
power of the appliance being monitored.

Pr

ess the "DISP" button once to display the

accumulative total energy consumption.

Pr

ess the "DISP" button a second time to display the current

presently consumed by the appliance being monitored.

Press the "DISP" button a third time to display the
voltage of the power supply.

ess the "DISP" button a fourth time to display the

Pr
frequency of the voltage of the power supply.

Pr

ess the "DISP" button a fifth time to display the

accumulative power-on time of the Power Meter.

III. OPERATING INSTRUCTION

DATA ERASURE

When the display shows the accumulative total energy consumption or the Power Meter’s accumulative
power-on time, you can press and hold down the "SET/CLR" button for more than 5 secs to erase this
presently displayed value from memory.

DISPLAY AND READ OPERATION

Pressing the "DISP" button repeatedly will cycle through the following recorded data on the screen:
dynamic average power (default) of the appliance, the accumulative total energy consumption, the current
presently consumed by the appliance, the voltage of the power supply, the frequency of the voltage of the
power supply, and the accumulative power-on time of the Power Meter.

2