Gardman Elegance Wooden Arch User Manual

Wooden Arch

Assembly Instructions

A

F

G

J

C B

H

D

I

K

E

Tools Required (not supplied)

• 10mm spanner

(

adjustable spanner or large pliers

w

ill suffice)

• Phillips screwdriver

Before You Start

• Lay out all of the component parts and
make sure you have all of those listed.

• When you are ready to start, make sure
that you have the right tools to hand,
plenty of space and a clean dry area for

ays try to assemble the

. Alw

assembl
product as close as possible to the
intended location.

emo

R

•
them safely.

• Retain the instructions for future use.

y

ve all plastic bags and dispose of

Caution

This pac
be kept away from children.

k contains small it

ems which should

Consumer Helpline

Assembly

1 Connect a left handed long leg (A), a right handed

long leg (B) and 2 rebated cross bars (D) with 4 x
85mm Allen bolts (H), using Allen key (K) provided.
Leave the bolts loose at first then expand a trellis

anel (C) and fit within the frame, positioning the

p
edges of the trellis panel into the inner rebated
grooves on the long legs and cross bars. Once in
place, tighten the bolts fully to secure each frame
side. Repeat to make the second side section.

Take one left hand curved member (F) & join to one

2

right hand curved member (G) with two of the
50mm bolts, washers & nuts (J). Repeat to make
second top arch side. Insert 4 x 6mm bolts (I)
through the holes in side of the one top arch side
& into the ends of the 4 plain cross bars. Ensure
the top arch side has the rebated ends facing
inwards toward the plain cross bars. Tighten with

llen key. Then place second top arch side on the

A
other ends of the plain cross bars & insert four more
6mm bolts (I) and tighten with Allen key. This forms
the roof assembly.

e one side section and slot into the roof assembly

ak

T

3

as shown & secure with two 6mm bolts with washers
and nuts (J). Repeat with second side section at
other end to form the entire arch assembly. Once
completed and all bolts are well tightened the unit
can be lifted up-right and installed into the intended
permanent position by sinking the legs into earth
or concr
Gardman Ground Spikes (set of four) available
separately - product code 07715.

ete filled trenches. Alternatively use

Ref Qty Description

A 2 Left handed long legs
B 2 Right handed long legs
C 2 Trellis panels
D 4 Rebated cross bars
E 4 Plain cross bars

t handed curv

Lef

2

F
G 2 Right handed curved members

6mm - 85mm Allen bolts

8

H

I 8 6mm - 50mm bolts

8 6mm - 50mm bolts, nut and washer sets

J

K 1 Allen key

ed members

ve any problems or queries with this

ou ha

If y
product then please contact our
helpline number: 01406 372227, or fax
[phone].

eet,

Or writ
Moult

e t

on, Spalding, Lincs, PE1

dman Ltd. High S

o: Gar

tr

2 6QD.