Gardman Compact walk-in greenhouse User Manual

Assembly Instructions

Compact walk-in
greenhouse

No Tools Required

Before You Start

Please check the pack contents before attempting to construct
this 'Compact Walk-In Greenhouse'.

Assembly

08727

Assemble as shown (Fig. 1) When fitting cover (H) ensure
frame is tightly pushed together and door is unzipped prior to
sliding over frame, failure to do so may cause damage to the
cover. Secure to frame with ties attached to inside of cover.
For securing on a soft surface insert pegs (I) through holes in
base of frame (E and F) or through the eyelets in the base of
the cover. For additional support guy ropes (J) can be attached
at the front and rear of the cover. Fixings included are designed
for use on a soft surface. For locating on a hard surface an
alternative method of fixing will be required.

Parts & Fittings Supplied

Helpline Number

If you have any problems or queries with this Greenhouse please call our helpline
on [phone] between the hours of 9am to 5.30pm Monday to Friday.

Gardman Limited, High Street, Moulton, Spalding, Lincolnshire PE12 6QD