Gardenline GLHT600 User Manual

620W Hedge Trimmer

User Guide

After Sales Support
Now you have purchased a Gardenline®
product you can rest assured in the
knowledge that, as well as your
3 year parts and labour guarantee,
you have the added peace of
mind of dedicated helplines
and web support.

AFTER SALES SUPPORT-7 DAYS A WEEK

www.coreservice.co.uk

GB

01904 727501

(Charged at local rates)

MODEL: GLHT600, 08/2015, 65531

IRE

019022605

Please read this manual
thoroughly before use and
retain for future reference.

Contents

Page
02

Welcome

03

General Information

05

Safety Instructions

12

Assembly and Parts List

17

Getting Started

20

Features

20

Operating Instructions

24

Maintenance and Care

27

Frequently Asked Questions

28

Useful Information

30

Declaration of Conformity

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

1

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

Welcome

You have made an excellent choice with the purchase of this
quality Gardenline® product.
By doing so you now have the assurance and peace of mind which
comes from purchasing a product that has been manufactured to
the highest standards of performance and safety, supported by
the high quality standards of Aldi.
We want you to be completely satisfied with your purchase so this
Gardenline® product is backed by a comprehensive manufacturer’s
3 year warranty and an outstanding after sales service through
our dedicated Helpline.
We hope you will enjoy using your purchase for many years to
come. If you require technical support or in the unlikely event
that your purchase is faulty please telephone our helpline for
immediate assistance. Please contact the technical helpline before
returning your product to store. Faulty product claims made
within the 3 year warranty period will be repaired or replaced
free of charge provided that you have satisfactory proof of
purchase (keep your till receipt safe!).
This does not affect your statutory rights. However, be aware that
the warranty will become null and void if the product is found to
have been deliberately damaged, misused or disassembled.

1

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

2

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

General Information

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR YOUR REFERENCE

WARNING! Read all safety regulations and instructions
before first use.
When using equipment, a few safety precautions must be
observed to reduce the risk of injuries and damage. Please
read the complete operating manual with due care.
Keep this manual in a safe place, so that the information
is available at all times. If you give the equipment to any
other person, give them these operating instructions as
well.

WARNING! This product is not intended for use by persons
with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
product by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the product.

2

AFTER SALES SUPPORT

Items supplied
Open the packaging and take out the equipment with
care.
Remove the packaging material and any packaging and/or
transportation braces (if applicable).
Check to see that all items are included.
Inspect the equipment and accessories for transport
damage.
Keep the packaging until the end of the warranty period.
Parts list please see page 12.

3

GB

01904 727501

IRE

019022605

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

Explanation of the symbols and warning signs on
the machine

1 2 3 4 5

101

6 7 8 9 10 11

1. This symbol indicates there is a danger of serious personal
injury or death if you do not observe the warning.

2. Read the instruction manual.

3. Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain at
a safe distance from the product when it is in operation.
In general, children must not come near the area where the
product is.

4. Appropriate ear, eye and mouth protection must be worn.

5. Do not expose the product to rain or wet conditions (moisture).

6. Warning! Switch the product off and disconnect it from the power
supply before assembly, cleaning, adjustments, maintenance,
storage and transportation.

7. Keep fingers away from moving blades.

8. Warning! Disconnect the mains plug if the cord is damaged
or entangled. DO NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY.

9. Guaranteed sound power level.

10. WEEE symbol. Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check
with your Local Authority or local store for recycling advice.

11. This product is of protection class II. That means it is equipped with
enhanced or double insulation.

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

4

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

Safety Instructions

3

SAFETY WARNINGS

Work area safety

1. Keep the work area clean and well lit. Cluttered or dark areas
invite accidents.

2. Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep the cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.

5. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.

6. If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock. The maximum operating
current of the RCD must be less than 30mA.

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

5

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

Personal safety

1. Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power
tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce the risk of personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to the power source and/or
battery pack, picking up or carrying the tool. Carrying power
tools with your finger on the switch or energising power tools
that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.

5. Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.

7. If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.

Power tool use and care

1. Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and more safely when operated at the rate for which it was
designed.

2. Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

6

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

4. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.

7. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations different from those intended could result
in a hazardous situation.

Service

1. Have your power tools serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.

ELECTRICALLY POWERED HEDGE TRIMMER SAFETY WARNINGS

AFTER SALES SUPPORT

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR YOUR REFERENCE

WARNING! When using the product the safety rules must
be followed. For your own safety and that of bystanders
please read these instructions before operating the
product. Please keep the instructions safe for later use.

7

GB

01904 727501

IRE

019022605

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

Training

1. Read the instructions carefully. Be familiar with the controls
and the proper use of the product.

2. Never allow people unfamiliar with these instructions or
children to use the product. Local regulations can restrict the
age of the operator.

3. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.

Preparation

1. Never operate the product while people, especially children, or
pets are nearby.

2. Wear eye, ear and mouth protection at all times while
operating the product

Operation

1. Use the product only in daylight or good artificial light.

2. Never operate the product with damaged guards or shields or
without guards or shields in place.

3. Keep hands and feet away from the cutting attachment at all
times and especially when switching on the motor.

4. Before use check the controls and correct operation of the
product.

5. Before using the product or after any impact, check for signs of
wear or damage and repair as necessary.

6. Always disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery pack)
– whenever leaving the product unattended;
– before clearing a blockage;
– before checking, cleaning or working on the product
– after striking a foreign object;
– whenever the product starts vibrating abnormally.

7. Take care against injury to feet and hands from the cutting
attachment.

8. Always ensure that the air vents are kept clear of debris.

9. Never use replacement parts or accessories not provided or
recommended by the manufacturer.

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

8

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531

10. The product should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.

11. Avoid using the product in bad weather conditions especially
when there is a risk of lightning.

12. Position the cord so that it will not be caught by the cutting
attachment during operation.

13. Disconnect from the power supply when the cord becomes
damaged or tangled.

14. If the cord becomes damaged during use, disconnect the cord
from the supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.

15. Do not use the product if the cord is damaged or worn.

16. Warning! The cutting elements continue to move after the
product is switched off.

17. Keep the extension cord away from the blades at all times.

18. Only use an extension cord with conductors of not less than

1.5mm2 or 2.0mm2 and:
– if rubber insulated, ordinary tough rubber sheathed flexible
cord (code designation 60245 IEC 53);
– if polyvinyl chloride insulated, ordinary polyvinyl chloride
sheathed flexible cord (code designation 60227 IEC 53).

19. Do not expose the product to rain.

Maintenance and storage

1. Disconnect the product from the power supply (i.e. remove the
plug from the power supply or the battery pack) and check for
damage after use.

2. Disconnect the product from the power supply (i.e. remove the
plug from the power supply or the battery pack) before
carrying out maintenance or cleaning work.

3. Use only the manufacturer’s recommended replacement parts
and accessories.

4. Inspect and maintain the product regularly. Have the product
repaired only by an authorised service centre or similar
qualified specialist.

5. When not in use, store the product out of the reach of children.

AFTER SALES SUPPORT

GB

01904 727501

IRE

019022605

9

kwww.coreservice.co.u

MODEL: GLHT600, 08/2015, 65531