GAPTEC 5ACDM_24S3 Datasheet

5ACDM Series

5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

AC-DC Converter 5 Watt

Wide input voltage range:
90~264VAC/120~370VDC
Short circuit protection (SCP)
Overload, over-voltage
protection

Common specications

Short circuit protection: Continuous, automatic recovery

Temperature rise at full load: 25°C TYP

Cooling: Free air convection

Operation temperature range: -25°C – +70°C

Storage temperature range: -40°C – +85°C

Welding temperature: Wave-soldering: 250±10°C; time:5~10s

Storage humidity range: < 95%

Safety standard: IEC60950-1/EN60950-1

EMI Conduction & Radiation: Design refer to EN55022, CLASS B

EMS Immunity: Design refer to EN61000

Hot plug: Unavailable

Case material: Plastic [UL94-V0]

MTBF (MIL-HDBK-217F@25°C): >328,000 hours, Ground Benign

Dimensions (LxWxH): 25.4x25.4x16.1 mm

Weight: 20g

Input specications

Item Test condition Min Typ Max Units

Input voltage range • Conventional

• AC Input

• DC Input

Input frequency 47 50/60 63 Hz

Input fuse VDE/UL/CCC FUSE 2.5A/250V (Slow blow)

Inrush current • 115VAC

• 230VAC

Leakage current CY0 is 1nF/400VAC 0.25 mA

Isolation specications

Item Test condition Min Typ Max Units

Isolation voltage Input/Output,

5mA/5sec

Isolation resistance Input/Output,

@500 Vdc

High eciency up to 85%
High safety isolation 3000VAC
Ultra-slim SIP package
Industrial grade
Meets IEC60950-1/UL60950-1

(pending)

Manual-welding: 360±10°C; time:3~5s

100
90
120

3000 VAC

100 MΩ

140

VAC

264

VAC

370

VDC

10
20

A
A

The 5ACDM series is a high eciency green power modules provided by
GAPTEC. The features of this series are: Accept either AC or DC
input, wide input voltage, high eciency, low power consumption, safety
isolation etc. All models are particularly suitable for the applications such
as industrial, electric power, instrumentation, smart home which do not
have high requirement on EMC. EMC application circuit (EMC reference
EN55032) must be added if the products need to be applied to EMC harsh
environment.

Output specications

Item Test condition Min Typ Max Units

Output voltage
accuracy

Min. load 0 %

Line regulation Io nom,Vi min…Vi max ±1 %

Load regulation ±1 %

Temperature drift 100% full load ±0.05 %/°C

Ripple & Noise* 20MHz Bandwidth

Transient response
setting time

Switching
frequency

Over-load
Protection

Over-voltage
Protection

* Test ripple and noise by “parallel cable” method. See application notes for
detailed operation instructions.

Example:

5ACDM_05S3
5= 5Watt; AC= AC-DC; DM= case style; 5Vout; S= Single Output;
3= 3kVAC

Note:

1. Module required dispensing xed after assembled;

2. All specications were measured at Ta=25°C, humidity<75%, nominal input
voltage and rated output load unless otherwise specied;

3. All index testing methods in this datasheet are based on our Company’s
corporate standards;

4. The performance indexes of the product models listed in this manual are as
above, but some indexes of non-standard model products will exceed the above­ mentioned requirements, and please directly contact our technician for specic
information;

5. We can provide product customization service;

6. Specications of this product are subject to changes without prior notice.

• 3.3V/5V output

• Others

(peak-peak value)

Vi nom, Io nom
= ←→0.5 Io nom

Full load, nominal input 65 KHz

≥ 110% rated output power,
Recovers automatically after
fault condition is removed

Zener clamp diode, 120%-150%
rated output Voltage

±3

%

±2

%

50 150 mV

1000 µs

GAPTEC-Electronic GmbH & Co. KG

[e-mail] – www.gaptec-electronic.com

5ACDM – Rev. 2018-1.1

Page 1 of 3

Specications subject to change without notice.

5ACDM Series

5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Model Power [W] Output voltage [VDC] Output current [mA] Eciency [%, typ] Capacitive load [µF, max]

5ACDM_03S3 5 3.3 1515 74 2200

5ACDM_05S3 5 5 1000 80 1000

5ACDM_09S3 5 9 555 82 300

5ACDM_12S3 5 12 416 82 160

5ACDM_15S3 5 15 333 83 100

5ACDM_24S3 5 24 208 83 43

5ACDM_24S3 5 48 104 85 10

Typical characteristics

Temperature derating graph

Parallel lines measure

GAPTEC-Electronic GmbH & Co. KG

[e-mail] – www.gaptec-electronic.com

5ACDM – Rev. 2018-1.1

Page 2 of 3

Specications subject to change without notice.

5ACDM Series

5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Mechanical dimensions

GAPTEC-Electronic GmbH & Co. KG

[e-mail] – www.gaptec-electronic.com

5ACDM – Rev. 2018-1.1

Page 3 of 3

Specications subject to change without notice.